• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.260-267
• /
• 2021

The purpose of this study was to experimentally investigate the effects of curing methods on the compressive strength and tensile behavior of alkali-activated slag-based fiber-reinforced composite with a water-to-binder ratio of 15%. Three kinds of mixtures according to the curing conditions were prepared and compressive strength and tension tests were performed. Test results showed that the compressive strength and the first cracking strength of composites decreased when high temperature curing and air curing were adopted, while tensile strain capacity of composites increased. It was also observed that crack spacing and crack width of composites decreased by applying high temperature and air curing.

• Geomechanics and Engineering
• /
• v.32 no.6
• /
• pp.601-613
• /
• 2023

Low liquid limit silt, widely distributed in the middle and down reaches of Yellow River, has the disadvantages of poor grading, less clay content and poor colloidal activity. It is very easy to cause vehicle jumping at the bridge-embankment transition section when the low liquid limit silt used as the backfill at the abutment back. In this paper, a series of laboratory tests were carried out to study the physical and mechanical properties of the low liquid limit silt used as back filling. Ground granulated blast furnace slag (GGBFS) was excited by active MgO and hydrated lime to solidify silt as abutment backfill. The optimum ratio of firming agent and the compaction and mechanical properties of reinforced soil were revealed through compaction test and unconfined compressive strength (UCS) test. Scanning electron microscope (SEM) test was used to study the pore characteristics and hydration products of reinforced soil. 6% hydrated lime and alkali activated slag were used to solidify silt and fill the model of subgrade respectively. The pavement settlement regulation and soil internal stress-strain regulation of subgrade with different materials under uniformly distributed load were studied by model experiment. The effect of alkali activated slag curing agent on curing silt was verified. The research results can provide technical support for highway construction in silt area of the Yellow River alluvial plain.

• Korean Journal of Materials Research
• /
• v.21 no.9
• /
• pp.502-508
• /
• 2011

The goal of the present work was to investigate the development of a geopolymeric ceramic material from a mixture of mine residue, coal fly ash, blast furnace slag, and alkali activator solution by the geopolymer technique. The results showed that the higher compressive strength of geopolymeric ceramic material increased with an increase in active filler (blast furnace slag + coal fly ash) contents and with a reduction of mine residue contents. The geopolymeric ceramic had very high early age strength. The compressive strength of the geopolymeric ceramic depended on the added active filler content. The maximum compressive strength of the geopolymeric ceramic containing 20 wt.% mine residue was 141.2 MPa. The compressive strength of geopolymeric ceramic manufactured by adding mine residue was higher than that of portland cement mortar, which is 60 MPa, when cured for 28 days. SEM observation showed the possibility of having amorphous aluminosilicate gel within geopolymeric ceramic. XRD patterns indicate that the geopolymeric ceramic was composed of amorphous aluminosilicate, calcite, quartz, and muscovite. The Korea Standard Leaching Test (KSLT) was used to determine the leaching potential of the geopolymeric ceramic. The amounts of heavy metals were noticeably reduced after the solidification of mine residue with active filler.

• The Korean Journal of Food And Nutrition
• /
• v.3 no.2
• /
• pp.123-132
• /
• 1990

Sweet potato $\beta$-amylase is a tetrameric enzyme consisting of four identical polypeptide chains with a molecular weight of 5.6$\times$104, though most of the other $\beta$-amylases are monomeric enzymes. But, the relationship between subunit structure and catalytic function of the enzyme is not known. This study was done to know what the function of the subunit structure of the enzyme is. We obtained the monomer from the enzyme by the treatment of SDS, alkali pH buffer and urea. But the monomer had not activity. We tried to prepare the active monomer from the enzyme by the modification with periodate-oxidized soluble starch , In the result, we succeeded in isolating an active monomer as an oxidized soluble starch-conjugated form The active monomer had 57% of the original activity, 13.2% of the sugar and the molecular weight was estimated to be 5.4$\times$104. This results suggest that the tetrameric form of the enzyme is a most stable one and exists in nature, and the subunit structure of the enzyme Plays an important role in stabilization but not catalytic function.

• Journal of the East Asian Society of Dietary Life
• /
• v.7 no.3
• /
• pp.315-324
• /
• 1997

Physicochemical properties of potato starches oxidized with sodium hypochlorite containing 1.5, 3.0, 4.5, and 6.0% active Cl/g starch at pH 7.0 were examined. Carboxyl group contents of oxidized potato starches were proportional to active chlorine concentration in use and water binding capacity, alkali number, and solubility increased with increasing the degree of oxidation. Blue value and iodine binding property indicated the change of amylose structure by the oxidation. Gelatinization trends obtained from transmittance and DSC thermograms showed that gelatinization temperature was lower as starch was oxidized higher. X-ray diffraction patterns and scanning electron micrographs implied oxidation might occur on the surface amorphous regions of starch granule.

• International Journal of Oral Biology
• /
• v.42 no.2
• /
• pp.71-78
• /
• 2017

BMP-2 is a well-known TGF-beta related growth factor, having a significant role in bone and cartilage formation. It has been employed to promote bone formation in some clinical trials, and to differentiate mesenchymal stem cells into osteoblasts. However, it is difficult to obtain this protein in its soluble and active form. hBMP-2 is expressed as an inclusion body in the bacterial system. To continuously supply hBMP-2 for research, we optimized the refolding of recombinant hBMP-2 expressed in E. coli, and established an efficient method by using detergent and alkali. Using a heparin column, the recombinant hBMP-2 was purified with the correct refolding. Although combinatorial refolding remarkably enhanced the solubility of the inclusion body, a higher yield of active dimer form of hBMP-2 was obtained from one-step refolding with detergent. The refolded recombinant hBMP-2 induced alkaline phosphatase activity in mouse myoblasts, at $ED_{50}$ of 300-480ng/ml. Furthermore, the expressions of osteogenic markers were upregulated in hPDLSCs and hDPSCs. Therefore, using the process described in this study, the refolded hBMP-2 might be cost-effectively useful for various differentiation experiments in a laboratory.

• Journal of the Korea Concrete Institute
• /
• v.16 no.4 s.82
• /
• pp.549-555
• /
• 2004

Cement of three alkalinities (equivalent alkalinities of 0.36,0.52 and 0.97) was employed in fabricating a set of classical G109 type specimens. To-date, these have been subjected to a one week wet-one week dry cyclic pending using 15 w/o NaCl solution. At the end of the dry period, potential and macro-cell current were measured to indicate whether the top reinforcing steel was in the passive or active state. Once this bar became active, the specimen was autopsied and the extent of corrosion was documented. Subsequent to visual inspection, concrete powder samples were collected from the upper region of the top rebar trace; and at a certain times concrete cores were taken from non-reinforced specimens. Using these, determinations were made of (1) critical chloride concentration for corrosion initiation ($Cl_{th}^-$), (2) effective chloride diffusion coefficient ($D_e$), and (3) pore water alkalinity ($[OH^-]$). The pore water alkalinity was strongly related to the alkali content of cement that was used in the mix. The chloride concentration, ($Cl^-$), was greater at active than at passive sites, presumably as a consequence of electro migration and accumulation of these species at active site subsequent to corrosion initiation. Accordingly, ($Cl^-$) at passive sites was considered indicative of the threshold concentration fur corrosion initiation. The $Cl_{th}^-$ was increased with increasing Time-to-corrosion ($T_i$). Consequently, the HA(High Alkalinity) specimens exhibited the highest $Cl_{th}^-$ and the NA(Normal Alkalinity) was the least. This range exceeds what has previously been reported in North America. In addition, the effective diffusion coefficient, $D_e$, was about 40 percent lower for concrete prepared with the HA cement compared to the NA and LA(Low Alkalinity) ones.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.21 no.1
• /
• pp.70-82
• /
• 2008

Objective : The purpose of this study is to examine the effects of Baickbujasan(BB) on the skin damage and depigmentation. Method : The inhibition of tyrosinase activity, melanogenesis and cell viability in cultured B16 melanoma cells were measured. In order to test effects of reduction of melanogenesis, B16 F-10 mouse melanoma stem line was employed to extract melanin from cultured cell, where BB was added or not, and was dissolved in alkali for colorimetric analysis. Also, in order to test skin alteration in C57BL/6 after UV irradiation, the animals were grouped into a UV urradiation group and UV irradiation after BB application group. Dopa oxidase tissue staining was excuted to invesitage the change in the distribution of active melanin cell. The distribution of active melanin cell in inner skin of iNOS after damage from UVB irradiation and the manifestation condition of P53 which takes part in natural death of keratinocyte were examined. Result : The results indicate that BB has significant effects on tyrosinase activity, and melanogenesis in vivo test. BB seems to reduce C57BL/6, external dermatological damage, for instance, erythematous papule, eczema, loss of keratinocyte, reduction in pus, and relieves dermatological damages. Conclusion : BB can be applied externally for UV protection and depigmentation.

• Ceramist
• /
• v.10 no.3
• /
• pp.48-54
• /
• 2007

Glass-ceramics transparent above $10\;{\mu}m$ in the infrared, have been synthesized. They are based on germanium and antimony sulphides or selenides associated to alkali halides. They are prepared by heating glass samples at temperatures above the glass transition, as a function of time. Ceramisation can be controlled, so that sub-100 nm crystals are generated in the glass matrix. Then, low light scattering is achieved and the transparency window of the original glass is maintained. When gallium sulphide is added, glass ceramics can be doped with rare-earth ions. Emissions from the $^4F_{3/2}$ and $^4I_{13/2}$ of $Nd^{3+}$ and $Er^{3+}$ ions, respectively, are more intense in glass-ceramics, as compared to their vitreous counterpart. Examination of band profiles and decaytimes show that rare-earth ions are embedded in both crystalline and glassy environments.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.713-717
• /
• 2006

$S_2O$-donor macrocyclic isomers incorporating a xylyl group in o- ($L^1$), m- ($L^2$) and p-positions ($L^3$) extract no metal ions except silver(I) from aqueous to chloroform phase. And the magnitudes of %Ex for silver(I) are in the order of $L^1$ > $L^2$ > $L^3$. Taking this result into account, $L^1$-$L^3$ were utilized as membrane active components to prepare potentiometric silver(I)-selective electrodes. The proposed macrocycles-based electrodes E1 ($L^1$), E2 ($L^2$) and E3 ($L^3$) exhibited comparable results which show considerable selectivity toward silver(I) over alkali, alkali earth and other transition metal ions. Comparative NMR study on $L^1$-$L^3$ and their complexes with silver(I) in solution was also accomplished. In addition, a unique sandwich-type complex $[Ag(L^1)_2]CIO_4$ was prepared from the assembly reaction of $L^1$ with $AgClO_4$ and structurally characterized by an X-ray diffraction analysis.