1 |
P. Snadberg, 'Studies of chlorides binding in concrete exposed in a marine environment,' Cement and concrete research, Vol.29, 1999, pp.473~477
DOI
ScienceOn
|
2 |
B. M.Perez, H. Zibara, R. D. Hooton and M. D. A. Thomas, 'A study of the effect of chloride binding on service life predictions,' Cement and concrete research, Vol.30, 2000, pp.1215~1223
DOI
ScienceOn
|
3 |
C. Alonso, C. Andrade, M. Castellote, and P. Castro, 'Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar,' Cement and Concrete Research, Vol. 30, 2000, pp.1047~1055
DOI
ScienceOn
|
4 |
D. S. Spellman, and R. F. Stratfull, 'Concrete Variables and Corrosion Testing,' Highway Research Record, No.423, 1963, 27pp
|
5 |
K. C. Clear, 'Time-to-Corrosion of Reinforcing Steel in Concrete Slabs,' Report No. FHWA-RD-76-70, Federal Highway Administration, Washington, D.C., 1976, 7pp
|
6 |
J. P. Broomfield, 'Corrosion ofSteel in Concrete,' E&FN Spon, London, 1997, pp.22~25
|
7 |
L. Li, and A.A. Sagues, 'Chloride Corrosion Threshold of Reinforcing Steel in Alkaline Solutions-Open-Circuit Immersion Tests,' Corrosion, Vol. 57, 2001, 19pp
DOI
ScienceOn
|
8 |
L. Li, A. A. Sagues and N. Poor, 'In situ leaching investigation of pH and nitrite concentration in concrete pore solution,' Cement and Concrete Research, Vol.29, March 1999, pp.315~321
DOI
ScienceOn
|
9 |
J. Nam, W. Hartt, K. Kim and L. Li, 'Effect ofcement alkalinity upon time-to-corrosion ofreinforcing steel in concrete undergoing chloride exposure,' NACE, paper No.03290, Corrosion 2003, pp.1~31
|
10 |
D. A. Hausmann, 'Steel corrosion in concrete- How does it occur?' Material Protection, Vol.6, 1967, pp.19~23
|
11 |
E. Samson , G. Lemaire, J. Marchand, and J. J. Beaudoin, 'Modeling chemical activity effects in strong ionic solutions,' Computational Materials Science, Vol.15, 1999, pp.285~294
DOI
ScienceOn
|
12 |
J. Tritthart, 'Chloride Binding in Concrete. II. The Influence of the Hydroxide Concentration in the Pore Solution of Hardened Cement Paste on Chloride Binding,' Cement and Concrete Research, Vol.19, 1989, 683pp
DOI
ScienceOn
|
13 |
S. Diamond, 'Effects of Two Danish Fly Ashes on Alkali Contents of Pore Solutions of Cement-Fly Ash Pastes,' Cement and Concrete Research, Vol. 11 , 1981, 383pp
DOI
ScienceOn
|
14 |
G. Achari, S. Chatterji and R. C. Joshi, 'Evidence of the concentration dependent ionic diffusivity through saturated porous media,' RlLEM, No.9, 1997, pp.74-76
|
15 |
S. Diamond, 'Effects of Microsilica (Silica Fume) on Pore Solution Chemistry of Cement Pastes,' Communications of Am. Ceramics Soc., 1983, 82pp
|
16 |
C. Arya, and Y. Xu, 'Effect of Cement Type on Chloride Binding and Corrosion of Steel in Concrete,' Cement and Concrete Research, Vo.25, 1995, 893pp
DOI
ScienceOn
|
17 |
O. Francy and R. Francois, 'Measuring chloride diffusion coefficient from non-steady state diffusion tests,' Cement and concrete research, Vol.28, 1998, pp.947-953
DOI
ScienceOn
|
18 |
P. Sandberg and J. Larsson, 'Chloride binding in cement pastes in equilibrium with synthetic pore solutions,' Chloride penetration in concrete structures, Ed. L.-O Nilsson, Nordic Miniseminar, Goiteborg, 1993, 98pp
|
19 |
G. E. Monfore and G. J. Verbeck, 'Corrosion of prestressed wire in concrete,' ACI Journal, Vol.32, 1960, 491pp
|
20 |
G. K. Glass, and N. R. Buenfeld, 'Chloride Threshold Levels for Corrosion Induced Deterioration ofSteel in Concrete,' paper No.3 presented at RlLEM International Workshop on Chloride penetration into Concrete, Oct. 15-18, 1995, Saint Remy-les- Chevreuse
|
21 |
ASTM Standard Test Method G 109-99, 'Determining the Effect ofChemical Admixtures on the Corrosion ofEmbedded Steel Reinforcement in Concrete Exposed to Chloride Environments,' Annual Book of ASTM Standards, Vol. 03.02, American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohcken, PA
|
22 |
ASTM Standard Test Method C876-99, 'Half-cell potentials of uncoated reinforcing steel in concrete,' Annual Book of ASTM Standards, Vol. 03.02, American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohcken, PA
|
23 |
M. Kawamura, O. A. Kayyali, and M. N. Haque, 'Effects of a Fly Ash on Pore Solution Composition in Calcium and Sodium Chloride-Bearing Mortars,' Cement and Concrete Research, Vol.18, 1988, 763pp
DOI
ScienceOn
|
24 |
FDOT, 'The Florida method of test for determining low level of chlorides in concrete and raw materials,' designation FM 5-516, Florida Department of Transportation, Sept 1994, pp.1~3
|
25 |
Li, L., Nam, J., and Hartt, W.H., 'Ex-Situ Leaching Measurement ofConcrete Alkalinity,' NACE paper No.03299. Corrosion 2003, pp.1~9
|
26 |
D. Constantiner, and S. Diamond, 'Pore Solution Analysis: Are There Pressure Effects,' in Mechanisms of Chemical Degradation of Cement-based Systems, Eds: K.L. Scrivener and J.F. Young, E&FN SPON, London, 1997, 22pp
|
27 |
O. A. Kayyali, and M. N. Haque, 'Environmental Factor and Concentration of Cl and OH in Mortars,' Journal of Materials in Civil Engineering, Vol.2, 1990, 24pp
DOI
|
28 |
J.A. Larbi, A.L.A. Fraay, and J. L. Bijen, 'The Chemistry of the Pore Fluid of Silica Fume-Blended Cement Systems,' Cement and Concrete Research, Vol.20, 1990, pp. 506~516
DOI
ScienceOn
|
29 |
C.L. Page, and O. Vennesland, 'Pore Solution Composition and Chloride Binding Capacity of Silica Fume Cement Pastes,' Materials and Structures, Vol. 16, 1983, pp.19-25
|
30 |
J. Duchesne, and M.A. Berube, 'Evaluation of the Validity of the Pore Solution Expression Method from Hardened Cement Pastes and Mortars,' Cement and Concrete Research, Vol. 24, 1994, pp.456-462
DOI
ScienceOn
|
31 |
T.U. Mohammed, T. Fukute, T. Yamaji, and H. Hamada, 'Long Term Durability of Concrete Made with Different Water Reducing Chemical Admixtures under Marine Environment,' in Concrete for Extreme Conditions, Eds: R.K Dhir, M.J. McCarthy, M.D. Newlands, Thomas Telford, London, 2002, 233pp
|