연구배경 : 호중구에 의해 매개되는 염증반응은 호중구의 수명이 매우 짧기 때문에 대부분 자연 종결된다. 패혈증에서는 이러한 호중구의 아포프토시스가 감소되어 수명이 연장되어 있어서 지속적인 염증반응이 일어나게 된다. 호중구의 수명 연장을 유도하는 많은 염증 매개 물질들이 nuclear factor-${\kappa}B$ 전사인자에 의해 조절되기 때문에 이 연구에서는 nuclear factor-${\kappa}B$가 패혈증 환자에서 관찰되는 호중 구의 아포프토시스 억제와 연관이 있을 것으로 가정하였다. 방법 : 건강한 정상인과 패혈증 환자의 호중구를 정맥혈로부터 신선하게 분리하여 실험하였다. 호중구의 아포프토시스는 특징적인 아포프토시스의 형태를 보이는 세포를 광학현미경으로 세거나 Annexin V를 이용한 유세포분석법으로 정량하였다. Nuclear factor-${\kappa}B$의 활성도는 면역형광 엽색법 또는 electrophoretic mobility shift assay로 판단하였다. 항아포프토시스 단백인 X-linked inhibitor of apoptosis의 발현 정도는 western blot으로 평가하였다. 결과 : 패혈증 환자에서 자발적 아포프토시스가 감소되어 있음을 확인하였다. 패혈증 환자의 호중구에 cycloheximide를 처치하였을 때 아포프토시스가 유의하게 증가하여 아포프토시스 감소가 새로운 단백 합성에 의존적임을 관찰하였다. 패혈증 환자의 호중구에서는 정상인과는 달리 기저상태에서도 nuclear factor-${\kappa}B$가 핵 내로 이동되어 활성화되어 있었고 nuclear factor-${\kappa}B$의 활성을 억제하였을 때 아포프토시스의 억제가 반전되었다. 또한 nuclear factor-${\kappa}B$에 의존적인 X-linked inhibitor of apoptosis 단백의 발현 수준이 정상인의 호중구에서는 24시간 동안 배양하면서 점차 감소하였지만 패혈증 환자의 호중구에서는 지속적으로 발현 수준이 유지되었다. 결론 : 패혈증 환자에서 관찰되는 호중구의 아포프토시스 억제에는 nuclear factor-${\kappa}B$ 전사인자의 활성화에 의한 생존 단백의 유도가 관여할 것으로 생각하였다.
최근 식물공장에 대한 연구가 활성화 되면서 식물공장내 인공광을 이용한 쌈채소 재배가 점점 늘어나고 있다. 특히 쌈채소를 좋아하는 우리나라에서는 그 소비량이 매년 증가하고 있으며, 토양재배보다는 수경재배로 생산한 엽채류를 좋아하기 때문에 식물공장 시설을 이용하여 수경재배로 쌈채소를 생산하면 그 효과가 크리라 생각된다. 따라서 본 실험은 식물공장내에서 쌈채소로 많이 이용되고 있는 적겨자와 청경채를 대상으로 양액농도별 수량과 비타민 함량의 차이를 분석하기 위하여 실시하였다. 그 결과, 적겨자와 청경채 모두 초장은 EC에 따른 유의성은 없었고, 엽수는 적겨자의 경우 EC 가 높아질수록 감소하는 경향을 보였으나 청경채의 경우는 유의성이 없었다. 청경채의 경우 EC가 높아질수록 엽면적이 현저하게 증가하였고, 생체중은 두 작물 모두 EC가 증가할수록 증가하는 경향을 보였다. 광합성 능력은 적겨자의 경우 뚜렷한 경향을 보이지 않았으나 청경채는 EC가 높을 때 높은 경향을 보였다. Ascorbic acid 함량은 적겨자의 경우에 EC가 낮을수록 높게 나왔고, 청경채의 경우에는 EC $2.0dS{\cdot}m^{-1}$ 처리구에서 가장 높았고, 1.5, $2.5dS{\cdot}m^{-1}$ 처리구 순이었다. 이상의 결과를 종합해 보면, 인공광 이용형 식물공장에서 적겨자와 청경채를 생산하고자 할 때에는 양액농도를 $2.0{\sim}2.5dS{\cdot}m^{-1}$로 관리하는 것이 생체중과 Ascorbic acid 함량을 고려해볼 때 가장 적절한 양액 농도 관리 방법이라고 생각된다.
High temperature tensile tests, steady state creep tests, Internal stress tests and creep rupture tests using A17075 alloy( $T_{6}$ ) were performed over the temperature range of 9$0^{\circ}C$~50$0^{\circ}C$ (0.4 $T_{m}$ ~0.85 $T_{m}$ ) and stress range of 0.64~17.2(kgf/$\textrm{mm}^2$). The main results obtained in this paper were as follows. (1) The activation energies for yielding at the temperature of 0.4 $T_{m}$ ~0.75 $T_{m}$ were calculated to be 25.7~36.5kcal/mol, which were nearly equal to the activation energies for creep. (2) At around the temperature of 9$0^{\circ}C$~12$0^{\circ}C$ and under the stress level of 10~17.2(kgf/$\textrm{mm}^2$), and at around the temperature of 200~41$0^{\circ}C$ and under the stress level of 1.53~9.55(kgf/$\textrm{mm}^2$) and again at around the temperature of 470~50$0^{\circ}C$ and under the stress level of 0.62~l.02(kgf/$\textrm{mm}^2$), the applied stress dependence of steady state creep rate $n_{measu}$ measured were, respectively, 3.15, 6.62 and 1.1, which were in good agreement the calculated stress dependence $n_{ealeu}$ obtained by the difference of the applied stress dependence of the Internal stress and the ratio of the internal stress to the applied stress. (3) At the temperature range of 0.4~0.43 $T_{m}$ , and at the temperature range of 0.52~0.75 $T_{m}$ and again at the temperature range of 0.82~0.85 $T_{m}$ , the activation energies $Q_{measu}$ obtained by steady state creep rate, respective, 26. 16, 34.9, 36.2 and 36.1kcal/mol, which were in good agreement with those obtained with the activation energies under constant effective stress and the temperature dependence of Internal stress. (4) At the temperature range of the 0.52~0.73 $T_{m}$ and under the stress level of 1.53~9.55(kgf/$\textrm{mm}^2$), the stress dependence of rupture life(n’) measured was 6.3~6.6, which was in good agreement with the stress dependence of steady state creep rate(n). And at the same condition the activation energy for rupture( $Q_{f}$ ) measured was 32.0~36.9kca1/mol, which was also in good agreement with the activation energy obtained by steady state creep rate ( $Q_{c}$ ). (5) The rupture life( $t_{f}$ ) might be represented by athermal process attributed to the difference of the applied stress dependence of the internal stress and the ratio of the internal stress to the applied stress, and the thermal activated process attributied to the temperature dependence of the internal stress as $t_{f}$ = A'$\sigma$$_{a}$ {n(1-d $\sigma$$_{i}$ /d $\sigma$$_{a}$ )/(1-$\sigma$$_{i}$ / $\sigma$$_{a}$ )}.exp[{ $Q_{c}$$^{*}$-( $n_{o}$ R $T^2$/ $E_{(T)}$) (d $E_{(T)}$/dT) - ( $n_{0}$ R $T^2$/ $\sigma$$_{a}$ - $\sigma$$_{i}$ ) (d $\sigma$$_{i}$ /dT)}/RT]. (6) The relationship betwween Larson-Miller rupture parameter and logarithmic stress was linearly decreased, so creep rupture life of Al 7075 alloy seemed to be predicted exactly with Larson-Miller parameter.meter.
The purposes of this investigation were to observe the reaction kinetics of five commercial dual cured resin cements (Bistite, Dual, Scotchbond, Duolink and Duo) when cured under varying thicknesses of porcelain inlays by chemical or light activation and to evaluate the effect of the porcelain disc on the rate of polymerization of dual cured resin cement during light exposure by using thermal analysis. Thermogravimetric analysis(TGA) was used to evaluate the weight change as a function of temperature during a thermal program from $25{\sim}800^{\circ}C$ at rate of $10^{\circ}C$/min and to measure inorganic filler weight %. Differential scanning calorimetry(DSC) was used to evaluate the heat of cure(${\Delta}H$), maximum rate of heat output and peak heat flow time in dual cured resin cement systems when the polymerization reaction occured by chemical cure only or by light exposure through 0mm, 1mm, 2mm and 4mm thickness of porcelain discs. In 4mm thickness of porcelain disc, the exposure time was varied from 40s to 60s to investigate the effect of the exposure time on polymerization reaction. To investigate the effect on the setting of dual cured resin cements of absorption of polymerizing light by porcelain materials used as inlays and onlays, the change of the intensity of the light attenuated by 1mm, 2mm and 4mm thickness of porcelain discs was measured using curing radiometer. The results were as follows 1. The heat of cure of resin cements was 34~60J/gm and significant differences were observed between brands (P<0.001). Inverse relationship was present between the heat of reaction and filler weight % the heat of cure decreased with increasing filler content (R=-0.967). The heat of reaction by light cure was greater than by chemical cure in Bistite, Scotchbond and Duolink(P<0.05), but there was no statistically significant difference in Dual and Duo(P>0.05). 2. The polymerization rate of chemical cure and light cure of five commercially available dual cured resin cements was found to vary greatly with brand. Setting time based on peak heat flow time was shortest in Duo during chemical cure, and shortest in Dual during light cure. Cure speed by light exposure was 5~20 times faster than by chemical cure in dual cured resin cements. The dual cured resin cements differed markedly in the ratio of light and chemical activated catalysts. 3. The peak heat flow time increased by 1.51, 1.87, and 3.24 times as light cure was done through 1mm, 2mm and 4mm thick porcelain discs. Exposure times recommended by the manufacturers were insufficient to compensate for the attenuation of light by the 4mm thick porcelain disc. 4. A strong inverse relationship was observed between peak heat flow and peak time in chemical cure(R=0.951), and a strong positive correlations hip was observed between peak heat flow and the heat of cure in light cure(R=0.928). There was no correlationship present between filler weight % or heat of cure and peak time. 5. The thermal decomposition of resin cements occured primarily between $300^{\circ}C$ and $480^{\circ}C$ with maximum decomposition rates at $335^{\circ}C$ and $440^{\circ}C$.
The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.
본 연구는 제조업 중에서도 지역성장 및 연관산업에 대한 파급효과가 가장 큰 부문인 자동차 산업을 대상으로 새로운 조립공장 입지가 지역경제의 성장 및 발전에 미치는 영향을 경계지리학적 관점에서 논의했다. 우리 나라의 대표적 신산업지구로 발전하고 있는 광양만권의 율촌 산업단지를 사례로, 한국 최대의 자동차 조림기업인 현대자동차의 새로운 조립공장 입지가 광주 전남의 자동차산업 전반에 어떠한 영향을 미칠 것인지, 그리고 보다 미시적 수준에서 광양만권에 어떠한 파급효과를 초래할 것인지 탐색해보고자 했다. 노동집약적 특성과 자본 및 기술집약적 특성을 동시에 지니는 자동차 조립 및 부품생산 부문을 대상으로 첫째, 조립부문-부품생산부문의 공간적 비공간적 연계 특성을 규명하고 둘께, 광주 전남지역 자동차산업의 현 주소 및 이에 대한 신설 조립공장의 파급효과를 분석하며 셋째, 신설 조립공장 입지에 따른 광양만권 역내의 부품산업 발전 가능성을 전망함으로써 지역개발의 파급효과를 극대화할 수 있는 방안을 모색해보고자 하는 것이 본 연구의 목적이다.
본 연구에서는 Euptelea pleiosperma 에탄올 추출물(EPEE)의 항산화능과 항염증 생리활성을 in vitro assay system 및 cell culture model system을 이용하여 분석하였다. 먼저 EPEE의 항산화능을 DPPH radical scavenging activity로 분석한 결과 radical 소거능의 정도가 양성 대조군으로 사용한 ascorbic acid 보다 높은 활성을 보여 매우 강한 항산화능을 보유함을 확인하였다. 또한 RAW 264.7 세포주를 이용한 $H_2O_2$ 및 LPS의 유도에 의해 생성된 ROS에 대한 소거능을 분석한 결과에서도 농도의존적인 강한 소거능을 보였다. 뿐만 아니라 대표적인 항산화효소 중 하나로 천연물에 의한 항산화능 활성에 의해 주로 발현이 유도되는 hemeoxygenase 1 (HO-1) 및 그 전사 인자인 nuclear factor-E2-related factor 2 (Nrf2)의 단백질 발현이 EPEE의 처리에 의해 유의적으로 증가됨을 보였으며 이러한 HO-1 및 Nrf2의 발현 변화는 상위신호전달계인 MAPKs 및 PI3K/Akt 에 의해 조절될 가능성을 보였다. 한편 EPEE가 LPS에 의해 유도된 NO 생성에 미치는 영향을 분석한 결과 농도의존적인 NO 생성 저해능을 보였으며 이는 NO 생성 단백질인 iNOS의 발현 저해에서 기인함을 확인하였다. 이와 같은 EPEE의 NO 생성 억제 효과는 염증 상위신호전달계인 NF-${\kappa}B$ 및 AP-1의 조절을 통해 일어날 가능성을 보였다. 이러한 결과를 통해 EPEE의 높은 항산화능과 항염증 활성을 처음으로 확인하였으며 향후 기능성 소재로서 유용하게 활용될 수 있을 것으로 판단된다.
본연구의 목적은 국내의 기존 하 폐수처리장에 생물막을 적용하여 BNR공정으로 전환 및 개조하거나 생물막 공법을 적용한 BNR공정을 3차 처리로 적용할 수 있는 새로운 공정을 개발하는 데 있다. 우리 나라 하수의 $SCOD_{cr}/T-N(NH_4{^+}-N+NOx-N) $ 비는 다른 나라에 비하여 상대적으로 낮기 때문에 완전한 탈질화를 얻기 위해서는 외부탄소원을 반드시 공급해야만 한다. 본 연구에서의 $SCOD_{cr}/NH_4{^+}-N$비는 2.49이었으며, 실험기간 동안 유입수 $NH_4{^+}-N$농도는 25에서 37 mg/L로 변화되었다. 하수처리시 질소제거능을 향상시키기 위하여 R-1(무산소/중간침전조/호기성/무산소/호기성)과 R-2(호기성/중간침전조/무산소/무산소/호기성)의 생물막을 이용하는 두 공정을 적용하였다. 외부탄소원을 투여하지 않은 조건에서 $NH_4{^+}-N$와 T-N의 유출수질과 제거효율은 R-1공정이 R-2공정에 비하여 하수로부터 질소제거에 보다 적절한 것으로 평가되었다. 무산소 반응조의 $SCOD_{cr}/NOx-N$비와 T-N제거효율을 고려하였을 때, R-1공정이 원하수내 유기물질의 분배에 있어서 더 효과적인 것으로 사료되었다. R-1 공정과 R-2공정에서 1 g의 $NH_4{^+}-N$를 제거하는데 요구되는 알칼리도는 R-1과 R-2 각각 5.18과 5.76(g $CaCO_3/g$ removed $NH_4{^+}-N$)이었으며, 이는 활성슬러지 BNR공정에 비하여 낮았다.
비소는 독성이 매우 큰 물질로 지하수 환경에서 산출빈도가 높다. 지하수 내 비소는 환원환경에서 무기비소인 아비산염의 형태로 존재하며, 산화한경에서 비산염의 형태로 존재한다. 아비산염은 비산염보다 독성이 높으며, 금속(수)산화물의 표면에 흡착이 잘 되지 않아 이동성이 높다. 이러한 이유로 독성이 높은 아비산염을 비산염으로 산화시켜 독성을 저감시키는 공정에 대한 연구가 수행되어져 왔다. 특히 광산화 공정은 운전이 간단하면서 경제적이며 효율이 높다고 알려져 있다. 본 연구에서는 광산화공정에서 기존에 광촉매로 주로 사용되어온 $TiO_2$를 대신하여 자연 상에서 산출되는 침철석을 광촉매로 이용하여 지하수 내에서 아비산염을 비산염으로 산화시키는 공정의 효율에 영향을 미치는 다양한 인자들을 평가하였다. 연구결과, 용존 양이온의 종류보다는 총 농도가 아비산염의 광촉매 산화에 영향을 미치는 것을 확인하였으며, pH가 높은 환경에서 아비산염의 광촉매 산화효율이 더욱 높게 나타나는 것을 확인하였다. 아비산염과 비산염이 공존할 경우, 흡착에 의한 비소의 제거는 아비산염과 비산염의 침철석에 대한 친화도에 따라 약간의 영향을 미치는 것으로 보이나, 아비산염의 광촉매 산화에는 영향을 미치지 않는 것으로 나타났다. 그리고 휴믹산은 아비산염의 광촉매 산화 공정간 수산화라디칼과 슈퍼옥사이드 라디칼과 같은 활성산소종과 반응하여 아비산염의 광촉매 산화 효율을 감소시키는 것으로 나타났다. 또한 아비산염의 광촉매 산화 공정간 전자 수용체로서 산소를 주입할시 가장 높게 효율이 증진되는 것을 확인할 수 있었다. 이러한 연구결과를 종합할 때, 공정의 최적화를 통하여 지하수 등의 수환경 내 존재하는 아비산염의 독성은 침철석을 이용한 광촉매 산화에 의하여 저감될 수 있을 것으로 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.