• Wind and Structures
• /
• v.10 no.4
• /
• pp.347-366
• /
• 2007

Guyed masts subjected to turbulent winds exhibit complex vibrations featuring many vibration modes, each of which contributes to various structural responses in differing degrees. This dynamic behaviour is further complicated by nonlinear guy cable properties. While previous studies have indicated that conventional frequency domain methods can reliably reproduce load effects within the mast, the system linearization required to perform such an analysis makes it difficult to relate these results directly to corresponding guy forces. As a result, the estimation of peak load effects arising jointly from the structural action of the mast and guys, such as leg loads produced as a result of guy reactions and mast bending moments, is uncertain. A numerical study was therefore undertaken to study peak load effects in a 295 m tall guyed mast acted on by simulated turbulent wind. Responses calculated explicitly from nonlinear time domain finite element analyses were compared with approximate methods in the frequency domain for estimating peak values of selected responses, including guy tension, mast axial loads and mast leg loads. It was found that these peak dynamic load effects could be accurately estimated from frequency domain analysis results by employing simple, slightly conservative assumptions regarding the correlation of related effects.

• Steel and Composite Structures
• /
• v.29 no.3
• /
• pp.319-332
• /
• 2018

This paper investigates the free vibration of geometrically imperfect functionally graded car-bon nanotube-reinforced composite (FG-CNTRC) beams that are integrated with two sur-face-bonded piezoelectric layers and subjected to a combined action of a uniform temperature rise, a constant actuator voltage and an in-plane force. The material properties of FG-CNTRCs are assumed to be temperature-dependent and vary continuously across the thick-ness. A generic imperfection function is employed to simulate various possible imperfections with different shapes and locations in the beam. The governing equations that account for the influence of initial geometric imperfection are derived based on the first-order shear deformation theory. The postbuckling configurations of FG-CNTRC hybrid beams are determined by the differential quadrature method combined with the modified Newton-Raphson technique, after which the fundamental frequencies of hybrid beams in the postbuckled state are obtained by a standard eigenvalue algorithm. The effects of CNT distribution pattern and volume fraction, geometric imperfection, thermo-electro-mechanical load, as well as boundary condition are examined in detail through parametric studies. The results show that the fundamental frequency of an imperfect beam is higher than that of its perfect counterpart. The influence of geometric imperfection tends to be much more pronounced around the critical buckling temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.363-364
• /
• 2009

For the application of superconductor technology, we need critical properties of superconductors such as a critical current ($I_c$). $I_c$ is varied as processing method by action of flux pinning center. Our research activities are reported on the establishment of standard measurement method for critical current in coated conductor. And then, we researched pre-studies for standardization of critical current evaluation method using IEC/TC 90 standard.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.928-933
• /
• 2004

A new approach for modelling and simulation of the cutting forces in end milling processes is presented. In this approach, the cutting forces in end milling are modelled based on a predictive machining theory, in which the machining characteristic factors are predicted from input data of fundamental workpiece material properties, tool geometry and cutting conditions. In the model, each tooth of a end milling cutter is divided into a number of slices along the cutter axis. The cutting action of each of the slices is modelled as an oblique cutting process. For the first slice of each tooth, it is modelled as oblique cutting with end cutting edge effect, whereas the cutting actions of other slices are modelled as oblique cutting without end cutting edge effect. The cutting forces in the oblique cutting processes are predicted using a predictive machining theory. The total cutting forces acting on the cutter is obtained as the sum of the forces at all the cutting slices of all the teeth. A Windows-based simulation system for the cutting forces in end milling is developed using the model. Experimental milling tests have been conducted to verify the simulation system.

• Journal of Korean Society for Quality Management
• /
• v.46 no.2
• /
• pp.259-268
• /
• 2018

Purpose: SIT(Systematic Inventive Thinking) has been widely used in recent years. The validity of the five thinking tools of SIT is examined, and how to improve the inventive thinking tools is investigated. Methods: Frequency analysis on the usage of the TRIZ 40 inventive principles was used. Inventive thinking tools are derived by eliminating principles with low frequencies and grouping similar principles together. Results: Segmentation, prior action, combining, extraction, cushion in advance, transformation of properties are most frequently used among the 40 principles of TRIZ. The most frequently used principles and similar principles with them are grouped into new inventive thinking tools. Two of them, division and attribute dependency, belong to the 5 thinking tools of SIT, and the others, proactive measures, combination and reversal, do not. Conclusion: The newly identified inventive thinking tools are division, combination, proactive measures, attribute dependency, and reversal. The new five inventive thinking tools are quite efficient since they can cover more than two thirds of the TRIZ 40 inventive principles.

• Biomolecules & Therapeutics
• /
• v.24 no.4
• /
• pp.347-362
• /
• 2016

Marine sponges have been considered as a drug treasure house with respect to great potential regarding their secondary metabolites. Most of the studies have been conducted on sponge's derived compounds to examine its pharmacological properties. Such compounds proved to have antibacterial, antiviral, antifungal, antimalarial, antitumor, immunosuppressive, and cardiovascular activity. Although, the mode of action of many compounds by which they interfere with human pathogenesis have not been clear till now, in this review not only the capability of the medicinal substances have been examined in vitro and in vivo against serious pathogenic microbes but, the mode of actions of medicinal compounds were explained with diagrammatic illustrations. This knowledge is one of the basic components to be known especially for transforming medicinal molecules to medicines. Sponges produce a different kind of chemical substances with numerous carbon skeletons, which have been found to be the main component interfering with human pathogenesis at different sites. The fact that different diseases have the capability to fight at different sites inside the body can increase the chances to produce targeted medicines.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.14-22
• /
• 2016

Pulping is a stage that can change fibrous raw materials into pumpable slurry. Recovered paper can be defibrated to individual fibers by shear stress generated by rotation of a rotor and water. Disintegration of recovered paper is more complicated than that of chemical pulp. When disintegration of recovered paper is poor, screening and cleaning efficiency will be worse and properties of paper will also be deteriorated. Therefore, pulping is an important treatment for improvement of availability of recovered paper and process runnability. In this study, degrees of disintegration of KOCC obtained from a linerboard mill was analyzed with a pilot-scale screen. Flake removal of KOCC slurry was performed by a pilot screen. Simple pumping action gave a positive effect on disintegration of KOCC. After pumping for 10 minutes, paper strength increased without the change of water retention value and fibrillation of KOCC slurry. This phenomena can be explained by modification of hornified surface of KOCC fibers by shear stress generated by pumping. Consequently, disintegration efficiency of KOCC can be enhanced by control of retention time at pulper or an agitation power at chests of papermaking process.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.10
• /
• pp.1780-1785
• /
• 2016

This paper presents few case studies of state diagnosis of XLPE cables using very low frequency techniques. The power cables of 22.9kV which have installation fault were assessed using VLF technique in addition to other techniques like insulation resistance and DC voltage withstand test. From the experimental results, The dielectric loss($tan{\delta}$) values of degradation of the cable(joint, knife, needle) at $U_0$ were 5.839, 5.526 and 6.251, respectively and all values were "further study advised". VLF PD measurement was also found defective portion. These method was effective in defect to fault in the degradation of the cable. However, the breakdown did not occur in the degradation of the cable because of properties of XLPE insulation. Few case studies of using VLF $tan{\delta}$ diagnosis for fault are measured and analyzed. The $tan{\delta}$ values at $U_0$ were "further study advised" or "action required".

• Korean Journal of Oriental Medicine
• /
• v.14 no.1
• /
• pp.123-128
• /
• 2008

Glehnia littoralis (Umbelliferae), a perennial herb distributed along the coastline of northern Pacific countries, is the medicinal plant used traditionally for treatment of various diseases. This review focuses on the various pharmacological activities of Glehnia littoralis for understanding about its traditional medicinal applications, medicinal uses in the modern society, and potentials for drug development Glehnia littoralis was reported to have anti-oxidant, anti-tumor, anti-amnesic, blood circulation-promoting, immunomodulatory, anti-microbial, and allelopathic activities. However, their mechanisms remain to be clarified. Because Glehnia littoralis has been prescribed in traditional Oriental medicine as a tonic herb, Glehnia littoralis can be better than other chemical drugs and medicines which exert the equal pharmacological activities. Although the activities of Glehnia littoralis are not specifically high-potent with unique mode of action, it may turn out that it can be beneficial to exert multiple pharmacological activities. In view of low toxicity, relative cheapness, presence in the diet, and occurrence in various herbal remedies of Glehnia littoralis, it needs to be prudent to evaluate its properties and applications further.

• Clinical and Experimental Pediatrics
• /
• v.51 no.10
• /
• pp.1031-1037
• /
• 2008

Macrolide antimicrobial agents including erythromycin, roxithromycin, clarithromycin, and azithromycin are commonly used in the treatment of respiratory tract infections in children. Newer macrolides that have structural modifications of older drug erythromycin show improved change in the spectrum of activity, dosing, and administration. However, recent studies reported that increasing use of macrolide antibiotics is the main force driving the development of macrolide resistance in streptococci. In particular, azithromycin use is more likely to select for macrolide resistance with Streptococcus pneumoniae than is clarithromycin use, a possible reflection of its much longer half life. Recently, erythromycin resistance rates of S. pneumoniae and Streptococcus pyogenes are rapidly increasing in Korea. Two main mechanisms of acquired macrolide resistance have been described, altered binding site on the bacterial ribosome encoded by the ermB gene and active macrolide efflux pump encoded by the mef gene. Relationship between the susceptibility of S. pneumoniae and the response to macrolides has been shown in studies of acute otitis media, but less clear in cases of pneumonia. This article reviews the spectrum of activity, pharmacokinetic properties, mechanisms of action and resistance, and clinical implication of resistance on the treatment of respiratory tract infections in children.