• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.541-542
• /
• 2006

The dispersed generation is recently increased introduction for the energy supply rationalization and effective management of power system. But the dispersed generation causes to the various trouble that isn't occurred in the past, for example, the two way systems have an effect on the mistake action of protection equipment and the power quality. In this paper, we research the influence on the harmonic when the dispersed generation is interconnected with distribution system. To achievement, we construct the interconnecting dispersed generation and distribution system which is applied to the permission of harmonic emission. After that, we simulate about the harmonic of distribution system interconnection dispersed generation by the PSCAD/EMTDC analyzing transient state of the power system.

• 한국전자통신학회논문지
• /
• 제6권2호
• /
• pp.330-336
• /
• 2011

이 논문에서는 GPS 신호 캡처 원리에 대한 연구를 기초로 하여 Matlab에서 GPS 신호캡처의 과정을 시뮬레이션, 실현하고 분석하였다. 소프트웨어 GPS(SGR) 수신기를 이용하여 위성항법장치 안테나 GPS의 원시 신호 데이터의 가장 낮은 수준을 처리할 수 있다. 시뮬레이션의 결과는 이러한 방법의 정확성, 가능성을 증명하였으며 시뮬레이션 플랫폼 GPS 신호의 실제 환경 연구에 근거하여 위성수신 장치의 성능을 높이는데 중요한 실용적인 의미가 있다.

• Journal of the Korean Data and Information Science Society
• /
• 제18권2호
• /
• pp.535-541
• /
• 2007

The Non-homogeneous Poisson process is probably the most popular model since it can model systems that are deteriorating or improving. The renewal process is a model that is often used to describe the random occurrence of events in time. But both these models are based on too restrictive assumptions on the effect of the repair action. The Modulated Power Law Process is a suitable model for describing the failure pattern of repairable systems when both renewal-type behavior and time trend are present. In this paper we propose maximum likelihood estimation of the next failure time after the system has experienced some failures, that is, Mean Time Between Failure for the MPLP model.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.119.2-119
• /
• 2001

The inspection of a meter is an action that measures the amount of electricity, water and gas used to impose user on a charge. In past days, a meter who visit consumer to look over meter and write data to the ledger and then go back his office to calculates the inspection of a meter. On the other hand, the AMR(Automatic Meter Reading) is remote control system to measure the amount of utility used and monitor a condition of the meter. A study about AMRS is started at 1960 all over the world and a successful application example is presented continuously in American, Europe and Japan etc. In this paper we use a check meter that is used in past days and we add an AMR to it. AMR receives data that is the amounts of electricity from the check meter and stores those ...

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.303-308
• /
• 1992

In this study, we propose a shared storage system which is more efficient policy than MIS(Mixed Intermediate Storage) policy for relatively rare storage system and can be called CIS(Common Intermediate Storage) policy. Using this strategy, we develop a new completion time algorithm and apply it to two kinds of optimal or near optimal scheduling method; combinatorial search and simulated annealing method. We also extend this strategy to other storage policy, for example MIS policy, with PLC(Programmable Logic Controller) logic and on/off action of electronic valves. It thus can be accepted as a basic form of FMS(Flexible Manufacturing System) for operating various storage policies. Finally we suggest the interlocking block to compansate for the shortcoming of CIS policy, i.e, complication of operation and safety, resulting in a basic batch process automation mode.

• 제어로봇시스템학회논문지
• /
• 제4권5호
• /
• pp.624-629
• /
• 1998

Evolutionary computation techniques can solve search problems using simulated evolution based on the ‘survival of the fittest’. Recently, the genetic programming (GP) which evolves computer programs using the genetic algorithm was introduced. In this paper, the genetic programming technique is used in order to design a rule based controller consisting of condition-action rules for an unknown system. No a priori knowledge about the structure of the controller is needed. Representation of a solution, functions and terminals in GP are analyzed, and a method of constructing a fuzzy logic controller using the obtained rule based controller is described. A simulation example using a nonlinear system shows the validity and efficiency of the proposed method.

• Journal of Ship and Ocean Technology
• /
• 제10권1호
• /
• pp.27-37
• /
• 2006

Current loads acting on offshore vessels are important for predicting the hydrodynamic and structural responses of the vessels. It is also true for analyzing the behavior of moored systems under the action of ocean current. Unfortunately there are few standardized current load coefficients for offshore vessels and it is extremely difficult to be applied to arbitrary hull shapes, if any. Therefore current load coefficients for three hull shapes are calculated in this study using a CFD code, which is well known in the shipbuilding industry. In order to validate the present approach, a typical VLCC is taken as numerical example and resulting current coefficients are compared with experiment together with the OCIMF data. The comparison shows a good agreement in the qualitative sense. Two additional models considered herein are a shuttle tanker and a FPSO under deepwater condition $(WD/T{\geq}6)$. The present numerical approach may be utilized for practical design of offshore vessels.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1685-1690
• /
• 2007

Wave and following checking cycle arbor in the mountains form that examine various theories that decide checking cycle and data and application possibility that can acquire actually were presented. If see in standpoint that breakdown detects singularity availability before change happening, problem is advanced how action of device may do ordinary times supervision (monitoring) or checking cycle. In checking cycle decision, situation of latency breakdown that can not know that cause breakdown before device that is using examines can exist. Example such as car examination, faur and equitable spirit health examination, security device etc. can be fatal the time. Therefore, study and examined arbor in the mountains room of family proper checking cycle.

• Steel and Composite Structures
• /
• 제7권2호
• /
• pp.119-133
• /
• 2007

Based on stability theory of current rigid steel frames and using the three-column subassemblage model, the governing equations for determining the effective length factor (${\mu}$-factor) of the columns in semirigid composite frames are derived. The effects of the nonlinear moment-rotation characteristics of beam-to-column connections and composite action of slab are considered. Furthermore, using a two-bay three-storey composite frame with semi-rigid connections as an example, the effects of the non-linear moment-rotation characteristics of connections and load value on the ${\mu}$-factor are numerically studied and the ${\mu}$-factors obtained by the proposed method and Baraket-Chen's method are compared with those obtained by the exact finite element method. It was found that the proposed method has good accuracy and can be used in stability analysis of semi-rigid composite frames.

• Journal of information and communication convergence engineering
• /
• 제18권1호
• /
• pp.49-54
• /
• 2020

Speed enforcement is one of the major challenges in traffic safety. The increasing number of accidents and fatalities has led governments to respond by implementing an intelligent control system. For example, the Korean government implemented a speed camera system for maintaining road safety. However, many drivers still engage in speeding behavior in blackspot areas where speed cameras are not provided. Therefore, we propose a methodology to analyze the combined accident and speeding data to offer recommendations to maintain traffic safety. We investigate three factors: "section," "existing speed camera location," and "over speeding data." To interpret the results, we used the QGIS tool for visualizing the spatial distribution of the incidents. Finally, we provide four recommendations based on the three aforementioned factors: "investigate with experts," "no action," "install fixed speed cameras," and "deploy mobile speed cameras."