• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.705-708
• /
• 2005

Mobile Mapping Systems using the vehicle equipped the GPS, IMU, CCD Cameras is the effective system for the management of the road facilities, update of the digital map, and etc. They must provide users with the sensor data which is acquired by Mobile Mapping Systems in real-time so that users can process what they want by using the latest data. But it' s not an easy process because the amount of sensor data is very large, particularly image data to be transmitted. So it is necessary to reduce the amount of image data so that it is transmitted effectively. In this study, the effective method was suggested for the compression/decompression image data using the Wavelet Transformation and Huffman Coding. This technique will be possible to transmit of the geographic information effectively such as position data, attitude data, and image data acquired by Mobile Mapping Systems in the wireless internet environment when data is transmitted in real-time.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.582-585
• /
• 2005

The Geostationary Operational Environmental Satellite (GOES) 9, which is currently located at 155°E geostationary orbits, has transmitted earth observation data acquired by imager to CDA at NOAA. After the acquisition on ground, observation data are corrected on ground and re-transmitted to GOES-9 for the dissemination to users. In this paper, the procedure and result from raw data acquisition and pre-processing for earth observation imagery retrieval from GOES-9 Raw data acquired in Korea at May 2005 are introduced.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.368-369
• /
• 2011

This article suggests an online-based remote fault current mode discrimination method in order to identify the causes of the power line faults with various causes. For that, it refers to existing cause identification methods and categorizes modes by fault causes based on statistical techniques beforehand and performs the pretreatment process of fault currents by each cause acquired from the fault recorder into a topological plane in order to extract the characteristics of fault currents by each cause. After that, for the fault mode categorization, it discriminates modes by each cause using data by each cause as leaning data through utilizing RBF network based on FCM allowing self-organization in deciding the middle layer. And then it tests the validity of the suggested method as applying it to the data of the actual fault currents acquired from the fault recorder in the electric power transmission center.

• Journal of Chest Surgery
• /
• v.18 no.2
• /
• pp.250-257
• /
• 1985

Despite low mortality and excellent long-term results after repair of Tetralogy of Fallot, certain associated anomaly such as single pulmonary artery continues to be told to have a high operative mortality and morbidity, and there is still some debate on appropriate surgical intervention. During the 4 year period from 1981 to 1984, surgical repair was performed on 5 patients with tetralogy of Fallot and congenital [4 cases] or acquired [1 case] absence of left pulmonary artery. Previous left pneumonectomy had been performed in the patient with acquired absence of a pulmonary artery. Transannular patch or RVOT patch alone with or without pulmonic valvotomy was used with some modifications to reduce pulmonic insufficiency in individual patient. In contrast with previous reports, all patients survived operation and have exhibited marked symptomatic improvement without pulmonic valve insertion nor valved conduit.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.255-258
• /
• 2003

It is hard to centrol the wheeled mobile robot because of uncertainty of modeling, non-holonomic constraint and so on. To solve the problems, we design the controller of wheeled mobile robot based on fuzzy-neural network algorithm. In this paper, we should research the problem of classical controller for path-tracking algorithm and design of Fuzzy-Neural Network algorithm controller. Classical controller acquired different control value according to change of initial position and direction. In this control value having very difficult and having acquired a lot of trial and error Fuzzy is implemented to adaptive adjust control value by error and change of error and neural network is implemented to adaptive adjust the control gain during the optimization. The computer simulation shows that the proposed fuzzy-neural network controller is effective.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1190-1195
• /
• 2011

This paper presents a waist pressure evaluation method in human sensibility using a electroencephalogram(EEG) signal. For this objective, a size-controllable waist-belt is used. First of all, EEG signals for relaxed state are acquired. Then, the waist-belt of the subject is tightened about 90% of normal state. After a few minutes, the belt of the subject is released. Some necessary preprocessing is performed on the acquired signals, Linear Prediction (LP) coefficients are utilized as the feature parameters extracting the characteristics of EEG signal, and a multi-layer neural network is used for indicating the state of body pressure. The results of the method showed 77.2% of coincidence with body pressure states. This may be compromising results for ssubject-independent sensibility evaluation using EEG signal.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.3
• /
• pp.199-205
• /
• 2011

This paper proposes a framework to predict the mechanical fault of hot rolling mill system (HRMS). The optimum process of HRMS is usually identified by the rotating velocity of working roll. Therefore, observing the velocity of working roll is relevant to early know the HRMS condition. In this paper, we propose the framework which consists of two methods namely spectrum matrix which related to case-based fast Fourier transform(FFT) analysis, and three dimensional condition monitoring based on novel visualization. Validation of the proposed method has been conducted using vibration data acquired from HRMS by accelerometer sensors. The acquired data was also tested by developed software referred as hot rolling mill facility analysis module. The result is plausible and promising, and the developed software will be enhanced to be capable in prediction of remaining useful life of HRMS.

• Journal of Chest Surgery
• /
• v.26 no.5
• /
• pp.360-364
• /
• 1993

From October 1989 to 1991 May, 100 cases of open heart surgery were performed under the cardiopulmonary bypass. 1. There were 47 male and 53 female patients ranging in age from 2 months to 64 years. 2. Of 100 cases of open heart surgery, 65 cases were congenital heart diseases, and 35 cases were acquired heart diseases. 3. In 65 cases of congenital heart diseases, there were 60 cases[92 %] with acyanotic heart anomaly and 5 cases [8 %] with cyanotic heart anomaly. 4. Among the 42 patients less than 15 years of age, 21 patients[50%] were below 10 kg and the operative mortality was 0.05 %. 5. The overall mortality was 4 %, and the operative mortality of congenital and acquired heart disease was 3.1% and 5.6%.

• Journal of Chest Surgery
• /
• v.13 no.2
• /
• pp.92-99
• /
• 1980

From 1958 up to the end of April 1980, during the period of 12 years 1640 cardiac surgery cases including 1069 open heart surgery and 304 valve replacement cases, were operated in this Department. There were 1070 congenital anomaly and 570 acquired disease cases. In 1070 congenital anomaly cases 673 acyanotic and 397 cyanotic anomaly patients were noted. In acquired diseases 94 pericardial and 456 valvular cases were found. Among 456 valve cases 189 mitral stenosis, 133 mitral insufficiency, 30 aortic valve lesion, 97 double valve, and 7 triple valve lesion patients were noted. Among 304 valve replacement cases 209 mitral, 34 aortic, 5 tricuspid, 34 aortic with mitral, 20 mitral with tricuspid, and 2 triple valves were replaced. Annual increase `of open heart surgery cases and decrease of operative deaths were remarkable in recent years. In recent years Shiley** oxygenator in pump-oxygenator set up and Ionescu** bovine pericardial xenograft bioprosthesis were used for valve replacement mainly.

• Journal of Chest Surgery
• /
• v.17 no.3
• /
• pp.389-397
• /
• 1984

Sixty cases of open heart surgery were performed in the Department of Thoracic and Cardiovascular Surgery of Chonbuk National University Hospital from July, 1983 to June, 1984. The patients were consisted of 40 [66%] congenital anomalies containing 26 [43%] patients of acyanotic group and 4 [23%] of cyanotic group, and 20 [34%] acquired heart diseases which involved one or more cardiac valves. The male patients were 42 and the female 18. In 20 valvular heart diseases, open mitral commissurotomy was done in 5 patients, mitral valvular replacement with tissue valve in 6, mitral valvular replacement with mechanical valve in 5, mitral valvular replacement with tricuspid annuloplasty in 2, mitral annuloplasty in 1, and mitral and aortic valvular replacements with mechanical valves in 1. The most frequency complication was low cardiac output syndrome occurred in 9, and the next was urethral stenosis, ARDS, and postoperative bleeding, etc. The perioperative mortality was 21% in congenital cyanotic heart disease, 12% in congenital acyanotic heart disease, and 5% in acquired heart disease.