• The Korean Journal of Ecology
• /
• v.21 no.2
• /
• pp.125-131
• /
• 1998

Histological damage and growth inhibition of Pinus densiflora were analysed in different areas around the Metropolitan area of Seoul urban (heavily polluted), suburban (lightly polluted), and rural(unpolluted) areas. Soil properties of each area were also investigated. Contact angles of water droplet on needle leaves growing in polluted areas were lower than that in unpolluted area. Transpiration rates of needle leaves growing in polluted areas were more rapid than that in unpolluted area. These results represented that needle leaves growing in polluted areas were more susceptible to water deficit than that growing in unpolluted area was. Growths of annual ring of Pinus densiflora growing in polluted areas were lower than that in unpolluted area. On the other hand, soil pH in polluted areas was lower than that in unpolluted area. That is, the former was more acidified than that the latter was. Ca and Mg contents in polluted areas were lower than that in unpolluted area, while Al contents in polluted areas were higher than that in unpolluted area. These soil properties revealed that the effects of acid precipitates in urban and suburban areas were severer than that in rural area.

• Food Science of Animal Resources
• /
• v.30 no.6
• /
• pp.946-950
• /
• 2010

This study evaluated the antimicrobial effects of meat processing-related organic acids on Burkholderia thailandensis (Burkholderia pseudomallei surrogate) with different water activities. B. thailandensis KACC12027 (4 log CFU/mL) was inoculated in microwell plates containing tryptic soy broth pH-adjusted to 4, 5, 6, and 7 with ascorbic acid, citric acid, and lactic acid and with water activities adjusted to 0.94, 0.96, 0.98, and 1.0 with NaCl, followed by incubation at $35^{\circ}C$ for 30 h. The optical density (OD) of the samples was measured at 0, 3, 6, 12, 24, and 30 h at 595 nm to estimate the growth of B. thailandensis. Growth of B. thailandensis was observed only at water activity of 1.0. In general, more bacterial growth (p<0.05) was observed at pH 6 than at pH 7, and the antimicrobial effects of the organic acids on B. thailandensis were in the following order: Ascorbic acid > lactic acid > citric acid after incubation at $35^{\circ}C$ for 30 h. These results indicate that organic acids in meat processing-related formulations should be useful in decreasing the risk related to an emerging high risk agent (B. pseudomallei).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.2
• /
• pp.152-157
• /
• 2003

Most Recently, with rapid development in marine industries such as marine structures and ship, there occurs much interest in the study of corrosion characteristics which play an important role in design of cooling water system like heat-exchanger. Especially, as operating environment of fresh cooling water system in vessels is acidified, this system is seriously corroded. In this study, to study on the corrosion characteristics of Al-alloy shell for cooler, the electrochemical polarization test of materials for the marine fresh water cooler such as Al-alloy, Cu and naval brass was carried out in fresh water. And thus the polarization resistance and anodic polarization behavior of Al-alloy, Cu and naval brass are investigated. Also, galvanic corrosion characteristics of Al-alloy coupled with Cu and naval brass is considered. The main results obtained are as follows ; (1) The current density of corrosion is high in order of Al-alloy > naval brass > Cu (2) As anodic potential increases, the corrosion resistance of naval brass is better than that of Cu. (3) The galvanic corrosion of Al-alloy coupled with Cu and naval brass is activated than corrosion of Al-alloy.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.1
• /
• pp.47-53
• /
• 2022

The objective of this study was to verify the effect of pig slurry application with acidification and biochar on feed value, nitrogen use efficiency (NUE) of maize forage, and ammonia (NH₃) emission. The four treatments were applied: 1) non-pig slurry (only water as a control, C), 2) only pig slurry application (P), 3) acidified pig slurry application (AP), 4) acidified pig slurry application with biochar (APB). The pig slurry and biochar were applied at a rate of 150 kg N ha^-1 and 300 kg ha^-1, respectively. The AP and APB treatments enhanced all feed values compared to C and P treatments. The NUE for plant N was significantly increased 92.1% by AP and APB treatment, respectively, compared to the P treatment. On the other hand, feed values were not significantly different between AP and APB treatments. The acidification treatment with/without biochar significantly mitigated NH₃ emission compared to the P treatment. The cumulative NH₃ emission throughout the period of measurement decreased by 71.4% and 74.8% in the AP and APB treatments. Also, APB treatment reduced ammonia emission by 11.9% compared to AP treatment. The present study clearly showed that acidification and biochar can reduce ammonia emission from pig slurry application, and pig slurry application with acidification and biochar exhibited potential effects in feed value, NUE, and reducing N losses from pig slurry application through reduction of NH₃ emission.

• Asian Journal of Turfgrass Science
• /
• v.12 no.4
• /
• pp.211-220
• /
• 1998

Cellulose-degrading fungi were idenfied as Rhizoctonia solani AG2-2(IV), T. harzianum and C. cochliodes. Rhizoctonia solani AG2-2(IV) grows better in the acidified media of pH 4 and 5 than pH 6 and 7. Mycelial growth of T. harzianum and C. cochliodes was also higher in pH 4 and 5 than in pH 6 and 7. In order to relate the above findings to nutrient utilization, mycelial growth of R. solani AG2-2(IV) are evaluated with various carbon sources. R. solani AG2-2(IV) grows well in the order of mannose, cellobiose, glucose, xylose and arabinose. However, mycelial dry weights of T. harzianum were 98.7, 78.0, 72.3, 43.7 and 32.3mg in glucose, mannose, cellobiose, xylose, and arabinose, respectively. Mycelial dry weight of C. cochilodes was 118, 65, 57, 49, and 16mg in mannose, cellobiose, xylose, glucose, and arabinose, respectively. Result of cellulase assay of R. solani AG2-2(IV) and soil fungi was reffered as, R. solani AG2-2(IV) produced more cellulase on CMC substrate than on CEL and secretes more enzyme in floated condition than in water-immersed condition. T. harzianum secreted less amount of cellulase than R. solani AG2-2 and C. cochliodes. T. harzianum produced no enzyme on CEL under water-immersed condition. C. cochliodes produced similar amounts of cellulase on either CMC or CEL under both water-immersed and floated condition.

• Macromolecular Research
• /
• v.9 no.3
• /
• pp.143-149
• /
• 2001

Poly(aspartic acid), PASP, is a biodegradable, water-soluble polymer and offers a biodegradable alternative to polycarboxylates and other non-degradable water-soluble polymers. PASP one of poly (amino acid)s, possesses carboxylic acid pendant group in its repeating unit, which can be used for various further modification purposes. In this study we prepared high molecular weight polysuccinimide, as the precursor polymer for PASP, by thermal polycondensation ofL-aspartic acid in the presence of phosphoric acid. The polysuccinimide was hydrolyzed with 0.1 N sodium hydroxide, and then acidified to give PASP. High water-absorbent gels were produced by thermal crosslinking of freeze-dried mixture of partially-neutralized PASP and different amount of low moi. wt. PEG-diepoxide compounds in aqueous medium. The swelling behavior of the prepared gels from different size and composition of crosslinking reagent in different media was investigated and the results were discussed. This PASP-based hydrogel materials possessing inherent biodegradability, potential non-toxicity and biocompatibility, is expected to be used as a substrate for various biomedical applications as well as a general purpose super-absorbent polymer.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.8
• /
• pp.1133-1136
• /
• 2004

The need for highly reliable methods for the determination of trace metals is recognized in analytical chemistry and environmental science. A method based on the cloud-point extraction (CPE) technique for the trace analysis of Pb and Cu in water samples is described in this study. The analytes in the initial aqueous solution are complexed with pyrogallol, and 0.1%(w/v) Triton X-114 is added as surfactant. Following phase separation at $50^{\circ}C$, based on the cloud point of the mixture and dilution of the surfactant-rich phase with acidified methanolic solution, the enriched analytes are determined by flame atomic absorption spectrometry. After optimization of the complexation and extraction conditions, the enrichment factors of Pb and Cu were found to be 72 and 85, respectively. Under optimum conditions, the preconcentration of 60 mL of samples in the presence of 0.1%(w/v) Triton X-114 permitted the detection of 0.4 ${\mu}gL^{?1}$ of Pb and 0.05 ${\mu}gL^{?1}$ of Cu. The proposed method was applied successfully to the determination of Pb and Cu in water samples.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.6
• /
• pp.559-572
• /
• 2018

The aim of this study was to evaluate pretreatment methods for 27 pharmaceuticals and personal care products (PPCPs) in various sewage samples using a modified quick, easy, cheap, effective, rugged, and safe (QuEChERS) and online solid-phase extraction with LC-MS/MS. Extraction efficiencies of PPCPs in the solid phase under different experimental conditions were evaluated, showing that the highest recoveries were obtained with the addition of sodium sulfate and ethylenediaminetetraacetic acid disodium salt dehydrate in acidified conditions. The recoveries of target compounds ranged from 91 to 117.2% for liquid samples and from 61.3 to 137.2% for solid samples, with a good precision. The methods under development were applied to sewage samples collected in two sewage treatment plants (STPs) to determine PPCPs in liquid and solid phases. Out of 27 PPCPs, more than 19 compounds were detected in liquid samples (i.e., influent and effluent) of two STPs, with concentration ranges of LOQ-33,152 ng/L in influents and LOQ-4,523 ng/L in effluents, respectively. In addition, some PPCPs such as acetylsalicylic acid, ibuprofen, and ofloxacin were detected at high concentrations in activated sludge as well as in excess sludge. This methodology was successfully applied to sewage samples for the determination of the target compounds in STPs.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.432-436
• /
• 2002

Benomyl, one of the known endocrine disrupting chemicals, was analyzed to understand the fate in the nature. Water, sediment and biota samples are acidified to hydrolyze benomyl into carbendazim then followed by extraction and concentration. The concentrations of carbendazim in the samples were determined by liquid chromatography/time-of-flight mass spectrometer. Analysis data showed that certain amount of carbendazim was accumulated in sediment. On the contrary, no sign of accumulation in biota was observed probably due to the increased degradation rate in vivo. It is, however, that no one can claim carbendazim is not harmful to biota, since carbendazim may give a negative effect against organisms at the point of intaking.

• Journal of Korean Society of Water and Wastewater
• /
• v.7 no.1
• /
• pp.20-28
• /
• 1993

The Wastewater from the weight reduction process of polyester is more difficult to be treated biologically than the general wastewater from dyeing and finishing processes in textile industries. Above wastewater shows high pH, high organic strength and wide variation of organic loading. These characteristics are due to TPA and EG resulting from alkaline weight-reduction process and make trouble in the operation of activated sludge process. Therefore, the objective of this study is to develop the pretreatment method for the successful operation of treatment process. For the successful pretreatment process, the wastewater from weight-reduction process should be segregated from other wastewater stream and then acidified with concentrated sulfuric acid to precipitate out TPA from DST solution. At the optimum pH of 2. 2, the initial $COD_{cr}$ 60,000mg/l is reduced to 11,500mg/l and the removal efficiency of $COD_{cr}$ is 81.1%. The required amount of sulfuric acid for pretreatment is not greater than the amount for the the existing neutralization process. Moreover, the supernatant of pretreatment process can be reused in acidification of wastewater.