• 대한치과교정학회지
• /
• 제31권1호
• /
• pp.137-147
• /
• 2001

Acidic primer는 하나의 용액으로 conditioning과 priming을 동시에 시행하는 새로운 접착 시스템으로 치질의 손상이 적고 처리 과정이 간단한 특징을 지닌다. 본 실험은 acidic primer를 이용하여 치면처리를 시행한 후 기존의 접착제로 브라켓을 접착할 때 적절한 결합강도를 지니는지 평가하기 위하여 고안되었다. 50개의 사람 소구치를 5개군으로 나누어 4개군은 acidic primer로 법랑질을 처리한 후 Clearfil Liner bond $2^{\circledR}$(1군), Transbond $XT^{\circledR}$(2군), Panavla $21^{\circledR}$(3군), Fuji Ortho $LC^{\circledR}$(4군)로 브라켓을 접착하였고 1개군은 TransHond $XT^{\circledR}$를 통상적인 산부식 방법을 이용하여 접착(5군)한 후 전단 결합 강도를 측정하고 접착파절의 양상을 평가하여 다음과 같은 결론을 얻었다. 1 Acidic primer로 처리한 4개의 군 가운데 광중합형 글래스 아이오노머를 사용한 군(4군)의 전단결합강도($9.72{\pm}3.16MPa$)와 Panavia $21^{\circledR}$을 사용한 군(3군)의 전단 결합 강도($8.69{\pm}2.72MPa$)는 37$\%$ 인산으로 처리한 후 광중합형 레진 (Transbond $XT^{\circledR}$)을 사용한 군(5군)의 전단결합강도($10.48{\pm}2.60MPa$)와 유의성있는 차이를 보이지 않았다 (P>0.05). 2. Acidic primer로 처리한 4개의 군 가운데 광중합형 글래스 아이오노머를 사용한 군(4군)과 Panavia $21^{\circledR}$을 사용한 군(3군)의 전단 결합 강도는 Clearfil Liner bond $2^{\circledR}$를 사용한 군(1군)의 전단 결합 강도($1.09{\pm}0.53MPa$)와 광중합형 레진(Transbond $XT^{\circledR}$)을 사용한 군(2군)의 전단 결합 강도($2.70{\pm}1.46MPa$)에 비해 유의하게 큰 강도를 보였다 (p<0.05). 3. 접착제 잔류지수 측정 결과 4군($2.1{\pm}1.1$)과 5군($2.9{\pm}0.3$)의 경우 1군($0.2{\pm}0.4$), 2군($0.3{\pm}0.9$), 3군($0.2{\pm}0.4$)에 비해 접착제 잔류지수가 유의하게 높았다 (p<0.05). 4. 4군과 5군의 접착제 잔류 지수간에는 유의한 차이가 없었다 (p>0.05). 따라서 acidic primer로 치면을 처리하는 방법은 시용되는 접착제에 따라 기존의 산부식 접 착법과 유사한 결합강도를 얻을 수 있어 교정용 브라켓 접착시 산부식 단계를 생략할 수 있는 가능성을 보여준다.

• Journal of Korean Academy of Oral Health
• /
• 제42권4호
• /
• pp.118-123
• /
• 2018

Objective: This study aimed to investigate the effects of fluoride-containing acidic tea beverages on bovine teeth surfaces. Methods: The pH values and fluoride concentrations of 11 kinds of mineral water and 23 kinds of tea were measured. The fluoride-containing Seopyenje black tea beverages with pH 3.48 were chosen for the experimental group. Distilled water that did not contain fluoride and had the same pH value as that of the Seopyenje black teas served as the positive control. The Jeju Samdasoo mineral waters with neural pH (pH 7.52) and no fluoride were chosen as the negative control. Bovine teeth in each group were submerged for 10 minutes. Thereafter, surface microhardness of each bovine teeth was measured and the results were analyzed. Results: The pH value range was 6.94-8.09 ($mean=7.37{\pm}0.08$) for the 11 kinds of mineral water and 3.48-6.74 ($5.62{\pm}0.05$) for the 23 tea beverages. Titratable acidity of the Seopyenje black tea beverages was higher than that of the distilled water mixed with citric acid, and the pH was 5.5 and 7.0, respectively. The fluoride content of the 11 kinds of mineral water was 0-1.09 ppm ($mean=0.44{\pm}0.02ppm$) that of the 23 tea beverages was and 0-0.74 ppm ($0.64{\pm}0.06ppm$). In terms of enamel microhardness reduction of the bovine teeth, the tea beverages had the largest effects. There was no significant difference in microhardness reduction between the tea beverages and distilled water mixed with citric acid (P>0.05). Conversely, a significant difference was found between the kinds of mineral water and tea beverages, and also between mineral water and distilled water mixed with citric acid (P<0.05). Conclusions: Acidic tea beverages appeared to erode the surfaces of bovine teeth. The amount of fluoride in the tea beverages was not enough to inhibit erosion. Therefore, frequent intakes of acidic tea beverage are likely to increase erosion on the surfaces of bovine teeth, by affecting the enamel microhardness of teeth.

• 상하수도학회지
• /
• 제20권1호
• /
• pp.71-78
• /
• 2006

The removal of protozoa in the coagulation process was evaluated under the different pH and turbidity using the jar test after the addition of polyaluminium chloride (PAC) as a coagulant. Two well-known protozoa of Cryptosporidium parvum and Giardia lamblia were tested at the same time with turbidity, the critical water quality parameter of the water treatment process. Both protozoa were removed about 1log (and up to 2log) at the optimum injection of PAC. The source water turbidity and pH affected the removal of protozoa and turbidity. At neutral and alkaline pH, 1.3-1.7log removal of protozoa for low turbid water with 5NTU, and 1.6-2.3log removal for high turbid water with 30NTU were achieved. However, at acidic pH, maximum 0.8-1.0log and 1.1-1.2log were removed for low and high turbid water, respectively, at the optimum PAC injection of 15mg/L. The relation of protozoa and turbidity removals were expressed as the 1st order equation (significantly positive relation) in the most of the tested conditions. In addition, the relation of protozoan removals with residual turbidity were also expressed the 1st order equation (significantly negative relation), although the significance of the equations were reduced at acidic pH. Therefore, residual turbidity could be a good index of efficient protozoan removal in the coagulation process, probably except at the low pH condition.

• 한국물환경학회지
• /
• 제32권6호
• /
• pp.600-627
• /
• 2016

Korea is one of the countries with a large veterinary antibiotics market, although antimicrobial resistance in bacteria is becoming a serious issue in many countries. The Korean government started to take interest in estimating the effects of livestock manure on rivers and agricultural soils and in monitoring of heavy metals, organic pollutants and antibiotics in the ambient water and soil. In this paper, pre-treatment methods to separate the selected antibiotics from solid samples were reviewed. It is essential to select an efficient and appropriate procedure for pre-treatment due to the high proportion of proteins and organics in biosolid samples. Pre-treatment consists of extraction followed by clean-up. Initially, homogenized samples were extracted by sonication, mechanical agitation or pressurized liquid extraction with methanol/acetonitrile/water mixture under acidic/basic conditions depending on the compound. However, aminoglycosides and colistin were extracted with 5% trichloroacetic acid and HCl, respectively. Since the ${\beta}-lactams$ are easily decomposed in acidic and basic conditions, they were extracted in neutral pH. Filtration with a membrane (pore size, $0.2{\mu}m$) or solid phase extraction with HLB and methanol, as eluents, was normally applied for the clean-up. At least, three different pre-treatment procedures should be adopted to screen all the selected antibiotics in solid samples.

• 한국식품저장유통학회지
• /
• 제24권2호
• /
• pp.312-319
• /
• 2017

신선 농산물의 비가열 살균에 사용되는 살균소독제는 처리시간과 살균소독제의 농도에 비선형적인 감균효과를 나타낸다. 따라서 실제 사용에 있어서는 적정 농도와 적정 시간에 대한 고려가 매우 중요하다. 본 연구에서는 희석염산(6%, v/v)을 원료로 생성한 미산성 차아염소산수(slightly acidic electrolzyed water, SlAEW)($20{\pm}1^{\circ}C$에서의 유효염소 30 ppm, ORP $562{\pm}23mV$, pH 6.4)로 4종의 채소류(상추, 깻잎, 치콘 및 케일)에 대한 미생물 저감 특성을 분석하여 비가열 살균공정설계에 필요한 살균효과를 평가하였다. SlAEW에 30분간 3회 침지하면서 핵심인자인 유효염소와 미생물군수 및 잔류 미생물군수와의 관계를 분석하였다. 대부분의 총균수 감소는 1차 침지 초기 10분간 이루어졌으며 4종의 채소류에 생존하는 3 log CFU/g의 총균수가 침지를 통해 감소시킬 수 있는 한계값으로 판단되었다. 또한 SlAEW에 10분간 침지함으로써 감소시킬 수 있는 균수는 평균적으로 약 2 log CFU/g이었다. 초기 10분후의 감소된 유효염소는 상추, 깻잎, 치콘 및 케일에 대해 각각 2.2 ppm, 2.0 ppm, 1.7 ppm 및 2.5 ppm이었고 감소된 유효염소량의 약 50-80%가 초기 10분내에 감소되었다.

• 한국식품과학회지
• /
• 제38권4호
• /
• pp.526-533
• /
• 2006

수도수(TW) 및 0.6% acetic acid(0.6% HOAC)를 대조구로 하고 강산성 전기분해수(SAEW; strong acidic electrolyzed water, pH 2.76, ORP 1,128mv, HClO 105.0ppm)와 약알칼리 전기분해수(LAEW; low alkaline electrolyzed water, pH 8.56, ORP 660 mV, HClO 73.8 ppm)를 침지액으로 하여 박피 연근의 품질 변화를 비교 검토하였다. 박피방법별로는 회전식 브러시형 박피기에 의한 감모율이 5.1%로 가장 작았으며 박피 후 3시간까지는 유의한 품질현화를 보이지 않았다 SAEW 및 LAEW 침지 박피 연근의 총균수는 저장 5일까지는 $10^1$ CFU/g 수준이었으며 TW 침지 박피 연근과 비교하여 저장 30일까지 1 log cycle 이상의 낮은 균수를 나타내었다. 총페놀성 화합물 함량은 TW 침지 박피 연근에 비해 저장기간 전반에 걸쳐 SAEW 및 LAEW 침지 박피 연근이 낮은 함량을, 그리고 PPO는 저장 15일까지 낮은 활성을 나타내었다. 색도는 a값 및 b값의 증가폭이 컸으며, 색차 변화는 SAEW 및 LAEW 침지 박피 연근이 TW 및 0.6% HOAC 침지 박피 연근에 비해 작았다. 경도 또한 TW 처리구에 비해 SAEW 및 LAEW 침지 박피 연근에서의 감소폭이 작았다 일반성분과 총당 함량은 전진적인 감소를 보였으나 vitamin C 함량은 0.6% HOAC 침지 박피 연근이 저장 10일에 18.4mg%, 저장 30일에 9.1mg%로 감소하여 저장초기에 비해 약 25% 수준으로 감소한 반면 SAEW 및 LAEW 침지 박피 연근은 TW 침지 박피 연근과 유사한 수준이었다. 관능평가 결과 종합적 기호도는 저장 5일부터 30일까지 모두 SAEW 침지 박피 연근이 가장 높게 평가되었다.

• Preventive Nutrition and Food Science
• /
• 제21권1호
• /
• pp.73-77
• /
• 2016

Flow and dynamic rheological properties of thickened waters prepared with commercial food thickeners were investigated at different pH levels (3, 4, 5, 6, and 7). The commercial xanthan gum (XG)-based thickener (thickener A) and starch-based thickener (thickener B), which have been commonly used in a domestic hospital and nursing home for patients with swallowing difficulty (dysphagia) in Korea, were selected in this study. Thickened samples with both thickeners at different pH levels showed high shear-thinning flow behaviors (n=0.08~0.22). Thickened samples at pH 3 showed higher n values and lower consistency index (K) values when compared to those at other pH levels. The K values of thickener A increased with an increase in pH level, while the n values decreased, showing that the flow properties greatly depended on pH. There were no noticeable changes in the K values of thickener B between pH 4 and 7. At pH 3, the thickened water with thickener A showed a higher storage modulus (G') value, while that with thickener B showed a lower G'. These rheological parameters exhibited differences in rheological behaviors between XG-based and starch-based thickeners, indicating that the rheological properties of thickened waters appear to be greatly influenced by the acidic condition and the type of food thickener. Appropriately selecting a commercial food thickener seems to be greatly important for the preparation of thickened acidic fluids with desirable rheological properties for safe swallowing.

• 한국환경과학회지
• /
• 제15권3호
• /
• pp.279-286
• /
• 2006

Electrokinetic technique was considered in removing arsenic from the abandoned mining tails. In order to estimate the removal characteristics of arsenic, the sequential extraction analysis and desorption experiment were carried out prior to the application of electrokientic process. The result of sequential extraction analysis indicated that the water soluble and exchangeable fraction, easily leachable to ground water, were very low as much as about 2.5% and the fraction except residual (38.3%), possibly extractable under very acidic or alkalic environment, was about 59%. In the result of desorption test using four different kinds of electrolytes, the mixture of citric acid and sodium dodecyl sulfate (SDS) showed the highest desorption efficiency as much as 77.3%. The removal efficiencies of arsenic from mining tailings by electrokinetic process under the different electrolyte environments were slightly low and resulted in the following order: citric acid + SDS (18.6%) > 0.1 $NHNO_3$ (8.1%) > HAc (7.4%) > Distilled water(6.6%). Also, arsenic in soil matrix was moved favorably in the direction of anodic rather than cathodic region, which is opposite trend with cationic metal ions generally existing in soil, because anionic form of arsenic is dominated in acidic soil caused by the movement of acid front form anode.

• Preventive Nutrition and Food Science
• /
• 제6권2호
• /
• pp.101-106
• /
• 2001

Alpha-amylase and glucoamylase activities were higher in koji with 40% water than that with 30 and 50% water, and A. oryzae exhibited very high alpha-amylase and glucoamylase activities compared to A. sojae and A. niger. Acidic, neutral and alkaline protease activities also showed higher activities in koji prepared with flour, Korean wheat powder and soybean powder with 40% water based on the weight of the sample. Alpha-amylase, acidic, neutral and alkaline protease activities of all the koji samples according to incubation periods increased until 3~4 days of incubation and maintained nearly the same level or slightly decreased after 5 days of incubation. The protease activities of A. oryzae and A. sojae showed nearly the same trend regardless of differences in substrate conditions and koji materials, but those of A. niger showed a lower activity than those of A. oryzae and A. sojae. These results suggest that the preparation of koji is possible with Korean wheat powder and soybean powder and A. sojae can be utilized as a new strain for fermented foods using soybean as the main materials to increase functional properties and produce products having a new taste and flavor.

• Food Science and Biotechnology
• /
• 제16권4호
• /
• pp.543-548
• /
• 2007

Low-energy processing technology, which enhances the utility of defatted soybean flour (DSF), was developed using extrusion processing. DSF was extruded at different conditions using a twin screw extruder and then, dried at $40^{\circ}C$ for 20 hr. The nitrogen solubility index (NSI), viscosity, water solubility index (WSI), and water absorption index (WAI) of DSF increased after extrusion processing. The density of DSF extrudates decreased with the decrease in water content from 53 to 33% and the increase in extrusion temperature from 110 to $160^{\circ}C$. The addition of NaOH from 1.2 to 1.8% and citric acid from 1 to 5% increased the total solubility (TS) of DSF due to the decrease of protein coiling and hydrophobic bonds formation during extrusion processing. When viscozyme was reacted first, TS, NSI, and soluble carbohydrate content of DSF hydrolysates increased about 12, 6, and 7%, respectively, compared to them reacted with protease first. The TS and NSI of DSF hydrolysates were increased about 15 and 10%, respectively, by extrusion processing at alkaline and acidic pH. Extrusion processing at alkaline and acidic pH contributed the increase of efficiency to hydrolyze DSF samples using enzyme.