• Clean Technology
• /
• v.3 no.2
• /
• pp.74-86
• /
• 1997

Recently the treatment of industrial wastes by membrane processes has drawn much attention due to increasing demands for clean technology. In the process investigated in this study, metal species in the acidic wastes are precipitated as metal hydroxide forms in a neutralization tank, and acid and base solutions are regenerated by water-splitting electrodialysis(WSED) to be reused in the process. Material balances of the processes for treating pickle liquor and mixed wastewater were calculated to explain conceptual design of the process. Experiments for neutralization precipitation with KOH and NaOH for mixed wastewater were carried out to precipitate metal hydroxide and to recover salt solution as supernatant. Also WSED of the salt solutions producing acid and base was tested in 2 or 3 compartment stacks using KCl and NaCl to investigate the effects of stack configurations on the WSED performance.

• Food Science of Animal Resources
• /
• v.37 no.2
• /
• pp.162-167
• /
• 2017

Functional and nutritional soluble proteins can be recovered from surimi (and surimi-like material) processing wastewater, reducing environmental problems and the cost of an irresponsible waste disposal. Recovered proteins may be added back at a low percentage to surimi products. The aim of this work was to evaluate the effect of the addition of soluble recovered proteins (RP), obtained from mechanically separated chicken meat surimi-like material (MSCM-SLM) processing wastewater by acidic pH-shifting, on the composition and texture of RP-MSCM-SLM, with RP contents of 0, 10, 20 and 30% (w/w) in the mixture. For that, proximate composition and gel properties were evaluated. The fat content of the MSCM-SLM was significantly reduced to 11.98% and protein increased to 83.64% (dry basis) after three washing cycles. The addition of 30% RP in the MSCM-SLM significantly augmented the protein content to 93.45% and reduced fat content from to 2.78%. On the other hand, the addition of RP was responsible for a drastic decrease in texture parameters, reaching 252.36 g, 185.23 g.cm, and 6.97 N for breaking force, gel strength and cutting strength, respectively, when 30% of RP was included in the MSCM-SLM. It was concluded that the obtained intermediary product (RP-MSCM-SLM) is a good option to applications in processed meat products where high texture parameters are dispensable, e.g., emulsified inlaid frankfurter-type sausages, but high protein content and low fat content desired.

• Mycobiology
• /
• v.38 no.1
• /
• pp.17-25
• /
• 2010

The common split-gilled mushroom, Schizophyllum commune is found throughout the world on woody plants. This study was initiated to evaluate conditions for favorable vegetative growth and to determine molecular phylogenetic relationship in twelve different strains of S. commune. A suitable temperature for mycelial growth was obtained at $30^{\circ}C$. This mushroom grew well in acidic conditions and pH 5 was the most favorable. Hamada, glucose peptone, Hennerberg, potato dextrose agar and yeast malt extract were favorable media for growing mycelia, while Lilly and glucose tryptone were unfavorable. Dextrin was the best and lactose was the less effective carbon source. The most suitable nitrogen sources were calcium nitrate, glycine, and potassium nitrate, whereas ammonium phosphate and histidine were the least effective for the mycelial growth of S. commune. The genetic diversity of each strain was investigated in order to identify them. The internal transcribed spacer (ITS) regions of rDNA were amplified using PCR. The size of the ITS1 and ITS2 regions of rDNA from the different strains varied from 129 to 143 bp and 241 to 243 bp, respectively. The sequence of ITS1 was more variable than that of ITS2, while the 5.8S sequences were identical. A phylogenetic tree of the ITS region sequences indicated that the selected strains were classified into three clusters. The reciprocal homologies of the ITS region sequences ranged from 99 to 100%. The strains were also analyzed by random amplification of polymorphic DNA (RAPD) with 20 arbitrary primers. Twelve primers efficiently amplified the genomic DNA. The number of amplified bands varied depending on the primers used or the strains tested. The average number of polymorphic bands observed per primer was 4.5. The size of polymorphic fragments was obtained in the range of 0.2 to 2.3 kb. These results indicate that the RAPD technique is well suited for detecting the genetic diversity in the S. commune strains tested.

• The Korean Journal of Ecology
• /
• v.16 no.2
• /
• pp.159-168
• /
• 1993

The seasonal changes of symbiotic nitrogen-fixation activity and environmental factors of autumn olive plant (Elaeagnus umbellata Thunb.), which is an important constituent species of temperate vegetation and a non-leguminous root nodule plant interacting with Frankia sp., were quantitatively analyzed inthe natural vegetations during hegrowing period. The acetylene redution April and showed two peaks of 133 and $145{\mu}M\;C_2H_4\;{\cdot}\;gfw^{-1}\;{\cdot}\;hr^{-1}$ in early June and mid September. The nitrogenase activity decreased to 10~30% during hot dry summer frommid June to the end of August, and disappeared during the dormant period of winter. The optimum rhizoshere. diurnal change showed the maximum activity in the mid-day and the minimum in the mid-night. The average contents of total nitrogen in each organ changed in the ranges of 42.5~40.1, 40.2~36.3, 30.3~28.6 and 18.4~16.2mgN $gdw^{-1}$ for nodule, leaf, root, and stem, respectively. The soil conditions of rhizosphere were weak acidic, ad seasonal variations of $NO_3^--N,\;NH_4^+-N,\;PO_4^{3-}-P$ and water contents were in the ranges of 48.3~79.5ppm,5.1~13.9ppm, 4.4~$9.9{\mu}M$ and 14.5~39.4%, respectively.

• Textile Coloration and Finishing
• /
• v.20 no.2
• /
• pp.19-28
• /
• 2008

The objective of this study was to apply the statistical technique known as design of experiments to optimize the % exhaustion variables for phthalocyanine dyeing of nylon fiber. In this study, a three-factor Central Composite Rotatable Design (CCRD) was used to establish the optimum conditions for the phthalocyanine reactive dyeing of nylon fiber. Temperature, pH and liquor ratio were considered as the variable of interest. Acidic solution with higher temperature and lower liquor ratio were found to be suitable conditions for higher % exhaustion. These three variables were used as independent variables, whose effects on % exhaustion were evaluated. Significant polynomial regression models describing the changes on % exhaustion and % fixation with respect to independent variables were established with coefficient of determination, R2, greater than 0.90. Close agreement between experimental and predicted yields was obtained. Optimum conditions were obtained using surface plots and Monte Carlo simulation techniques where maximum dyeing efficiency is achieved. The significant level of both the main effects and interaction was observed by analysis of variance (ANOVA) approach. Based on the statistical analysis, the results have provided much valuable information on the relationship between response variables and independent variables. This study demonstrates that the CCRD could be efficiently applied for the empirical modeling of % exhaustion and % fixation in dyeing. It also shows that it is an economical way of obtaining the maximum amount of information in a short period of time with least number of experiments.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.167-174
• /
• 2004

Several metalliferous and coal mines, including Myungjin, Seojin and Okdong located at the upper watershed of Okdong stream, were abandoned or closed since 1988 due to the mining industry promotion policy and thus disposed an enormous amount of mining wastes without a proper treatment facilities, resulting in water pollution in the downstream areas. AMD and waste effluents from the closed coal mines were very strongly acidic showing pH ranges of 2.7 to 4.5 and had a high level of total dissolved solid (TDS) showing the ranges of 1,030 to 1,947 mg/L. Also heavy metal concentrations in these samples such as Fe, Cu, Cd and anion such as sulfate were very high. These parameters of AMD and effluents were considered to be highly polluted as compared to those in the main stream area of the Okdong river and be major pollutants for water and soil in tile downstream area. Pollution indices of the surface water at the upper stream of Okdong river where AMD of the abandoned coal mines was flowed into main stream were in the ranges of 16.3 to 47.1. On the other hand, those at the mid stream where effluents from tailing dams and coal mines flowed into main stream were in tile ranges of 10.6 to 19.5. However, those at the lower stream were ranged from 10.6 to 14.9 These results indicated that mining wastes such as AMD and effluents from the closed mines were tile major source to water pollution at the Okdong stream areas.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.3
• /
• pp.68-77
• /
• 2015

This study was conducted to characterize food waste leachate (FWL) and to compare its characteristics according to generation source: feed supplement- and compost-producing facilities. FWL contained high levels of organic compounds such as carbohydrate, protein and lipid. The moisture content of FWL was among the range of conventional wet anaerobic digestion. FWL was acidic (pH of $4.0{\pm}0.3$) and showed high coefficients of variance for specific parameters: carbohydrate, protein, lipid, ethanol, acetic acid and propionic acid. FWL derived from feed supplement-producing facilities showed slightly lower concentrations of most parameters than FWL derived from compost-producers. However, the difference was not significant at 5% significance level according to analysis of variance.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.320-330
• /
• 2012

The natural dyeing of cotton fabrics with guava leaf extract was investigated. The temperature and time of dyeing are $40^{\circ}C$ and $90^{\circ}C$ for eighty minutes, respectively. In addition, the dyebath has been set at pH 5. Sn pre-mordanted fabrics showed the highest K/S value. Regardless of dyeing temperature, K/S values were high when Al, Cu, Fe-mordanted fabrics were dyed in post-mordanting and Sn-mordanted fabrics were dyed in pre-mordanting. The K/S value of dyeing fabrics could be increased with repetitive dyeing and mordanting. Compared to untreated dyed fabrics, the K/ S values of fabrics which had been treated with soybean milk, chitosan and gall nut tannin were increased. The changed surface colors of fabrics that were treated with soybean milk, chitosan and gall nut tannin were Y, YR and achromatic colors. Fabrics dyed with alkaline water extract showed reddish color. Sn-mordanted fabrics dyed with acidic water extract showed vivid yellowish color, and Cu-mordanted fabrics dyed with ethanol extract showed yellowish green color. In case of Sn-mordanted fabrics, the washing fastness was level 4. The dry cleaning fastness also showed very excellent result with level 4-5. The rubbing fastness was better in dry rubbing than in wet rubbing of the fabrics. For the light fastness, all dyed fabrics showed low fastness. For antibacterial activity, the powder of guava leaf extract and the dyed fabrics with guava leaf extract showed 99.9% of high antibacterial activity. All dyed fabrics showed higher deodorization and UV protection rate than control fabric.

• Economic and Environmental Geology
• /
• v.28 no.3
• /
• pp.243-249
• /
• 1995

In order to investigate the origin of sulfate in rain waters and to evaluate the feasibility of using sulfur isotope method as a tracer of atmospheric pollutants, the sulfur isotopic ratio of sulfate in rain waters collected in Chonju city from October 1994 to March 1995 was monitored and was compared with those of possible sources proposed by previous works. The pH of rain waters shows an intermediate acidic range from 4.45 to 6.88 and their daily variation appears to be well correlated with to the amount of precipitation. The sulfur isotopic ratios of sulfate in rain waters show a highly restricted range from 0.0 to + 1.8‰. The ${\delta}^{34}S$ values are similar to those of soil and pine tree surrounding Chonju city, but largely deviate from those of China. D-parameter($d={\delta}D-8{\delta}^{18}O$) of rain waters varies from 9.4 to 28.8. The values indicate that the rain waters in Chonju city are originated from the rainy front of China continent. All data obtained from this study suggested that sulfate in the rain waters collected in Chonju city was mainly derived from the sulfur dioxide gas emitted by the petroleum combustion. Therefore, sulfur isotopic study for the precipitation provided an excellent tool for environmental assessment in this region and for tracing the source of atmospheric pollutants.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.1
• /
• pp.37-43
• /
• 2007

A gene encoding inulin fructotransferase (di-D-fructofuranose 1,2': 2,3' dianhydride [DFA III]-producing IFTase, EC 4.2.2.18) from Bacillus sp. snu-7 was cloned. This gene was composed of a single, 1,353-bp open reading frame encoding a protein composed of a 40-amino acid signal peptide and a 410-amino acid mature protein. The deduced amino acid sequence was 98% identical to Arthrobacter globiformis C11-1 IFTase (DFA III-producing). The enzyme was successfully expressed in E. coli as a functionally active, His-tagged protein, and it was purified in a single step using immobilized metal affinity chromatography. The purified enzyme showed much higher specific activity (1,276 units/mg protein) than other DFA III-producing IFTases. The recombinant and native enzymes were optimally active in very similar pH and temperature conditions. With a 103-min half-life at $60^{\circ}C$, the recombinant enzyme was as stable as the native enzyme. Acidic residues and cysteines potentially involved in the catalytic mechanism are proposed based on an alignment with other IFTases and a DFA IIIase.