• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.10
• /
• pp.986-993
• /
• 2010

In this study, sorption characteristics of thermally treated activated alumina (AA) for fluoride were investigated. Sorption experiments have been conducted in equilibrium and kinetic batch conditions. Also, effects of solution pH and anions on fluoride removal have been observed. The properties of thermally treated ( $700^{\circ}C$) activated alumina (AA700) and untreated activated alumina (UAA) were compared using field-emission scanning electron microscope, energy-dispersive spectrometry, X-ray diffractometer (XRD) analysis, and Brunauer-Emmett-Teller (BET) analysis. From the experiments using AA thermally treated at different temperatures (100, 300, 500, $700^{\circ}C$), it was found that at high fluoride concentrations (50, 100, 200 mg/L) the sorption capacity of thermally treated AA increased with increasing thermal treatment temperature. At an initial fluoride concentration of 200 mg/L, the sorption capacity of AA700 was 3.67 times greater than that of UAA. The BET analysis showed that the specific surface area of UAA was about 2 times larger than that of AA700. The XRD analysis indicated that UAA was composed of both boehmite (AlOOH) and bayerite ($Al(OH)_3$) while AA700 was $Al_2O_3$. The reason that fluoride sorption capacity of AA700 increased despite of decrease in specific surface area compared to UAA could be attributed to the change of crystal structure. The kinetic sorption test showed that fluoride sorption to AA700 arrived at equilibrium after 24 h. The equilibrium test demonstrated that the maximum sorption capacity of AA700 was 5.70 mg/g. Additional batch experiments indicated that fluoride sorption to AA700 was the highest at pH 7, decreasing at both acidic and basic solution pHs. Also, fluoride sorption to AA700 decreased in the presence of anions such as phosphate, nitrate, and carbonate. This study demonstrated that thermal treatment of AA at high temperature could increase its sorption capacity for fluoride.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.1
• /
• pp.21-26
• /
• 2002

A supercapacitor was developed using an amorphous ruthenium oxide material. The electrode of supercapacitor was prepared using an amorphous ruthenium oxide, which was synthesized from ruthenium trichloide hydrate$(RuCl_3{\cdo5}xH_2O)$. Thin film of tantalum was used as a current collector because it had wide. potential window characteristics than titanium and 575304 materials. A supercapacitor was assembled with ruthenium oxide as an electrode active material and 4.8M sulfuric acid solution as an electrolyte. The specific capacitance of the electrode was tested by a cyclic voltammetry using a half cell. The maximum differential specific capacitances during the oxidative and the reductive scans were 710 and $645\;F/g-RuO_2{\cdot}nH_2O$, respectively. The average specific capacitance was $521\;F/g-RuO_2{\cdot}nH_2O$. The assembled supercapacitor was protonated to the potential level of 0.5V vs. SCE. Super-capacitor, which was adjusted to the appropriate protonation level, had the specific capacitance of $151\;F/g-RuO_2{\cdot}nH_2O$ based on the concept of full cell.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.5
• /
• pp.485-500
• /
• 2016

We examined acidity state of inorganic aerosol and oxidation state of organic aerosol by High Resolution Time of Flight Aerosol Mass Spectrometer (HR-ToF-AMS) at Baengnyeong Super site from Jan 2012 to Dec 2013. Additionally, we carried out the analysis for the aerosol component group of organic matter ($C_xH_y$, $C_xH_yO_1$, $C_xH_yO_z$, $C_xH_yO_zN_p$) and elemental composition to calculate H/C, O/C, N/C, OM/OC and identify the oxidation state. The aerosol chemical composition in this study is dominated by sulfate ($SO_4{^{2-}}$), nitrate ($NO_3{^-}$) plays a smaller role in aerosol acidity. Ammonium ($NH_4{^+}$) was found in a formation of $(NH_4)_3H(SO_4)_2$. However, the binding formations of $NH_4NO_3$ and $NH_4Cl$ increase in the winter. $C_xH_yO_1$ indicating the oxidized state of $PM_{1.0}$ has the highest ratio of 41% while $C_xH_y$ indicating the non-oxidized state has a lower ratio of 36%, meaning that the oxidation level of $PM_{1.0}$ in Baengnyeong Island is high. The ratio between H/C and O/C was 1.33 and 0.78 respectively, showing the characteristic of LV-OOA (Low volatility-Oxygenated Organic Aerosol). Acidic and oxidized aerosols sampled during this field study were largely anthropogenic in origin from Chinese continent and photochemically aged.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.377-382
• /
• 1998

This study was carried out to investigate the relation between surface acidity and interfacial electrical characteristics of surface-treated ${\gamma}-alumina$ whose surface activity was increased. The points of zero charge (P. Z. C.) of ${\gamma}-alumina$ whose surface is treated with the sulfuric, nitric and hydro-chloric acid of various concentration were measured from the site-binding theory and mass transport method. The surface active sites were measured by amine titration method and Hammett indicator method. The interfacial properties at alumina/KCl(aq) interface were measured by potentiometric titration. From the experimental results, the following results were obtained. Pure ${\gamma}-alumina$ surface acidity decreases with the increase of calcination temperature at strength $H_o{\leq}+9.3$ Surface-treated alumina acidic properties increase with the anion loading on alumina surface. The surface ionization constants decrease with anion loading on alumina surface, then P. Z. C. decreases with acid amount on alumina surface. Acid amount of surface treated alumina can be correlated with surface charge density at strength $H_o{\leq}+4.8$ as follows. $SO_4^2-/Al_2O_3:Q_A=-0.172ln(0.0418{\sigma}+1.448)$ $NO_3^-/Al_2O_3:Q_A=-0.024{\sigma}-0.0189$ $Cl^-/Al_2O_3:Q_A=-0.01{\sigma}-0.2006$.

• Journal of Plant Biology
• /
• v.35 no.4
• /
• pp.317-322
• /
• 1992

The nitrogen fixation activity and environmental factors of Lespedeza bicli!oy Turcz, forming annual root nodules by symbiotic Rhizobium sp. were analyzed in the field conditions during the growing period. Seasunal changes of $N_2-fixation$ activity showed the maximum value of $120\;\mu\textrm{M}\;C_2_H4{\cdot}noduie\;g\;fw^{-1}{\cdot}hr^{-1}$ during the active growing period (June) and varied significantly depending on the growth phase and environmental factors. The maximum activities were attained at the conditions of pH 7, $30^{\circ}C$ of temperature, 18 Kpa of oxygen partial pressure and inhibited by water stress and nitrogen sources. The habitat soil was weak acidic and poor in nitrogen, phosphorus and organic matter contents. The leaf area ratios and chlorophyll contents were ranged from 442 to $48;\textrm{cm}^2{\cdot}g\;dw^{-1}$ and from 33 to $38\;\mu\textrm{g}\;chI{\cdot}\textrm{cm}^2$. Nitrogen contents in each organ showed the maximum of 46, 19 and $11\;mg{\cdot}g\;dw^{-1}, respectively for leaf, rool and stem in the early period. The highest phosphorus contents were 4.2, 1.2 and $0.6\;mg{\cdot}g\;dw^{-1}$, respectively for leaf. root and stem in early growing period. The allocation ratios of nitrogen quantity showed 60% for leaves and 73% for roots during the active and late growth period, and 22% [or stems in average. The allocalion ralios o[ phosphorus quantity showed 58% for leaves during the most productive period, 70% for roots in the pre-growth stage and 26% for stems in average.verage.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.5
• /
• pp.371-381
• /
• 1997

Precipitation sampls were collected in Chonju-city during October 1994 to September 1995 and were analysed for major ions (N $a^{+}$, $K^{+}$, $Ca^{2+}$, $Mg^{2+}$, C $l^{[-10]}$ , NO/$_3$, S $O_4$$^{2-}$) and trace metals (Al, Cd, Ni, Pb, Sr, Zn) in addition to pH, in order to understand the chemical characteristics of acid rain and to estimate the origin of the determined ions. Most rain showed a neutral or alkaline character, and only 35% had a pH lower than 5.6. S $O_4$$^{2-}$ and N $O_3$$^{[-10]}$ are identified as the primary contributors to precipitation acidity in this region. Neutralization of precipitation acidity occurs as a result of the dissolution of alkaline compounds containing $Ca^{2+}$, $Mg^{2+}$ and $K^{+}$. S $O_4$$^{2-}$ and N $O_3$$^{[-10]}$ precipitation concentrations exhibit a seasonal pattern in which higher concentrations are observed during spring months and lower concentrations during summer months. However, the seasonal behavior of $H^{+}$ concentrations differs from this pattern, in that the highest concentrations occur during autumn months, owing to the different influence of neutralization processes. In all rain, S $O_4$$^{2-}$ concentration exceeded NO/$_3$$^{[-10]}$ concentration. The contribution of maritime sources to the total S $O_4$$^{2-}$ concentration was very low or negligible. For rain strongly affacted by yellow sand, $Ca^{2+}$, $Mg^{2+}$ and $K^{+}$ ions show a sharp increase in concentration, reflecting the increased amount of dust and soil suspended in atmosphere. At the same time, S $O_4$$^{2-}$ and N $O_3$$^{[-10]}$ concentrations are at their highest levels while $H^{+}$ values are not comparably elevated, presumably beacause much of the acidity has been neutralized by alkaline substances. The seasonal variance of trace metal concentrations in rainwater is similar to that of major cations. The annual wet flux of acidic pollutants and trace metals wat calculated to be as follows: N $O_3$$^{[-10]}$ ; 2.32 g/$m^2$, S $O_4$$^{2-}$, 5.34 g/$m^2$, Al; 6.30 mg/$m^2$, Cd; 0.62 mg/$m^2$, Ni; 4.08 mg/$m^2$, Pb: 9.76 mg/$m^2$, Sr; 5.94 mg/$m^2$, Zn; 111 mg/$m^2$./$m^2$.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.430-439
• /
• 2020

This study focused on analyzing solid brown cosmetic residues that were excavated from the tomb of the Hwahyeop princess. The cosmetics had been buried in 1752 in Cheonghwa Baekja (small porcelain jars) within a Huigwakham (a stone box sealed with lime). A literature search and chemical analyses of the relics were conducted at the National Palace Museum of Korea. Based on the results of these analyses, raw materials and manufacturing methods for reproduction of the cosmetic were selected and then cream-form cosmetics were prepared. Aging tests using heat, ultraviolet (UV) radiation, and CO₂ were carried out to emulate the deterioration of the excavated cosmetics. Further chemical analyses and functionality tests were performed to evaluate changes from the tests and the effect as a cosmetic. As heat aging progressed, among the reproduced cosmetics, the one which has a high proposition of oil showed a color difference value of 32; the oxidation of oils involved chemical changes in O-H and C=C groups. As the cosmetic cream deteriorated under UV aging, the pH value became acidic. The result of the functional coverage test of the reproduced cosmetic cream was lower than the standard coverage ratio of modern cosmetics.

• Resources Recycling
• /
• v.30 no.6
• /
• pp.28-35
• /
• 2021

An experiment was conducted to separate or recover Co and Ni using Cyanex 301 from process by-products and waste resources containing Co and Ni. To separate and recover Co and Ni from simulated leaching solutions, 10 v/v% Cyanex 301 was used as an extractant in this study; Li was not extracted. At equilibrium pH 1.5 and a phase ratio (A/O) of 1.0, 0.44% of Mg and 11.57% of Mn were extracted, and more than 99% of Co and Ni were extracted. McCabe-Thiele diagram analysis confirmed that more than 99.9% of Co and Ni could be extracted simultaneously through two-stage extraction with an extraction phase ratio (A/O) of 2. It was possible to extract Mg and Mn simultaneously through the scrubbing process. In the scrubbing process, more than 99% of Mg and 87% of Mn were scrubbed using 0.05 M of H₂SO₄, and 99.9% of Mg and more than 80% of Mn were scrubbed using 0.05 M of HCl. In the stripping process, 93% of Co and 5% of Ni were stripped selectively by 3.0 M of H₂SO₄. However, when 8.0 M of HCl was used as a stripping solution, more than 99.9% of Co and more than 90% of Ni were stripped simultaneously.

• Applied Chemistry for Engineering
• /
• v.33 no.4
• /
• pp.394-401
• /
• 2022

The synthesis of 1,2-alkylaminopropanediols (1,2-AAPs) was designed to improve the hydrophilicity of linear 1,2-alkanediols having 10, 12, 14, and 16 carbon atoms in the alkyl chain. 1,2-AAPs were synthesized by reacting 3-monochloro-1,2-propanediol (3-MCPD) with linear alkylamines having 10, 12, 14 or 16 carbon atoms in an ethanol solvent at 40℃ for 2 h. The yield and purity of four types of 1,2-AAPs synthesized were found to be in the range of 51-58% and 85-99%, respectively. The amine salts of four types of 1,2-AAPs were prepared from a purified paste or solid compound by adding an acidic solution (HCl) to pH 7, and then their solubilities and antibacterial effects were tested. 1,2-decylaminopropanediol, 1,2-dodecylaminopropanediol, and 1,2-tetradecylaminopropanediol were all dissolved in water at concentrations of 100%, 50%, and 0.1%, respectively, however 1,2-hexadecylaminopropanediol was not. The antibacterial effect was improved as the length of the alkyl chain increased. As a result of confirming the preservative effect of the lotion (cosmetic formulation) applied with 1,2-AAP for application, it showed very strong antibacterial activity at low concentrations ranging from 0.005% to 0.2%.

• Clinical and Experimental Reproductive Medicine
• /
• v.28 no.2
• /
• pp.147-153
• /
• 2001

Objective: The present study was performed to investigate the efficiency of partial laser assisted hatching (p-LAH; lased 1/2 ZP width from ZP edge) on hatching of mouse blastocysts. Methods: We used non-contact $1.48{\mu}m$ diode laser (MTM, Switzland) to create a precise hole on zona pellucida. 2-cell embryos were collected from the mouse (ICR) oviduct at 48 hours after hCG administration. Collected 2-cell embryos were cultured in the P-1 medium supplemented with 0.4% BSA. For experiments, embryos at 8-cell stage were used after $20{\sim}22$ hours in culture. After conventional (c-LAH) or partial laser assisted hatching, the embryos were further cultured in P-1 medium supplemented with 0.4% BSA for 3 days. To compare efficiency of complete and partial laser assisted hatching, hatching rate, hatching time and blastocyst diameter and zona pellucida thickness at hatching time were investigated. Embryos were examined every 12 hours. Blastocyst diameter and zona pellucida thickness at hatching time were measured with an ocular micrometer. Results: Hatching rates of p-LAH group (84.2%) was significantly higher than that of control group (39.3%), but there was no difference between the p-LAH (84.2%) and c-LAH (91.2%). p-LAH group was hatched 12 hours earlier than control group, but hatched 12 hours later than c-LAH group. The diameter of blastocyst at hatching time of p-LAH group ($113.1{\pm}6.4{\mu}m$) was smaller than that of control group ($122.2{\pm}5.0{\mu}m$), but larger than that of c-LAH group ($102.2{\pm}2.7{\mu}m$). Zona pellucida thickness at hatching time of p-LAH group ($6.4{\pm}0.9{\mu}m$) was thicker than that of control group ($4.5{\pm}1.5{\mu}m$), but thinner than that of c-LAH group ($10.0{\pm}0.8{\mu}m$). Conclusion: These results suggest that p-LAH may maintains the cell arrangement of early embryos to ensure successful development and prevent precocious hatching of blastocyst when compare to c-LAH and conventional (acidic tyrode) AH. Thus, p-LAH may provide a valuable and effective AH technique for human ART program.