DOI QR코드

DOI QR Code

Recovery of Co and Ni from Strong Acidic Solution by Cyanex 301

강산성용액에서 Cyanex 301에 의한 Co 및 Ni 회수 연구

  • Cho, Yeon-Chul (Department of Advanced Materials Sci. & Eng., Daejin University) ;
  • Kim, Ki-Hun (Department of Advanced Materials Sci. & Eng., Daejin University) ;
  • Ahn, Jae-Woo (Department of Advanced Materials Sci. & Eng., Daejin University)
  • 조연철 (대진대학교 신소재공학과) ;
  • 김기훈 (대진대학교 신소재공학과) ;
  • 안재우 (대진대학교 신소재공학과)
  • Received : 2021.10.26
  • Accepted : 2021.11.12
  • Published : 2021.12.31

Abstract

An experiment was conducted to separate or recover Co and Ni using Cyanex 301 from process by-products and waste resources containing Co and Ni. To separate and recover Co and Ni from simulated leaching solutions, 10 v/v% Cyanex 301 was used as an extractant in this study; Li was not extracted. At equilibrium pH 1.5 and a phase ratio (A/O) of 1.0, 0.44% of Mg and 11.57% of Mn were extracted, and more than 99% of Co and Ni were extracted. McCabe-Thiele diagram analysis confirmed that more than 99.9% of Co and Ni could be extracted simultaneously through two-stage extraction with an extraction phase ratio (A/O) of 2. It was possible to extract Mg and Mn simultaneously through the scrubbing process. In the scrubbing process, more than 99% of Mg and 87% of Mn were scrubbed using 0.05 M of H2SO4, and 99.9% of Mg and more than 80% of Mn were scrubbed using 0.05 M of HCl. In the stripping process, 93% of Co and 5% of Ni were stripped selectively by 3.0 M of H2SO4. However, when 8.0 M of HCl was used as a stripping solution, more than 99.9% of Co and more than 90% of Ni were stripped simultaneously.

코발트와 니켈을 함유한 공정부산물 및 폐자원으로부터 Cyanex 301을 사용하여 코발트 및 니켈을 분리, 회수하는 실험을 실시하였다. 황산침출 모의 용액으로부터 10 v/v% Cyanex 301을 사용하여 추출할 경우, 리튬은 추출되지 않았으며, 평형 pH 1.5, 추출 상비(A/O) 1.0조건에서 마그네슘은 0.44%, 망간은 11.57% 추출되었으며 코발트와 니켈은 99% 이상 추출되었다. McCabe-Thiele diagram 분석 결과, 추출 상비(A/O) 2.0, 2단 추출을 통해 코발트와 니켈을 99.9% 이상 동시 추출 가능성을 확인하였다. 공추출 된 마그네슘 및 망간의 경우 세정 공정을 통해 제거가 가능하였는데, 세정액으로 0.05M 황산용액에서는 마그네슘은 99%, 망간은 87%이상 제거되었고, 세정액으로 0.05M 염산용액을 사용할 경우에는 마그네슘은 99.9%, 망간은 80% 이상 세정되어 제거 가능하였다. 세정 후 추출액에서 탈거 시에는 탈거액으로 3.0M 황산을 사용할 경우에는 코발트는 93%, 니켈은 5% 정도 탈거가 되어 선택적 탈거가 가능하였다. 그러나 8M HCl을 사용할 경우에는 코발트는 99.9% 이상, 니켈도 90% 이상 탈거되어 코발트와 니켈을 동시에 회수가 가능하였다.

Keywords

References

  1. J. W. Lee, W. B. Kim, 2014 : Research Trend of Electrode Materials for Lithium Rechargeable Batteries, J. Korean Powder Metall. Inst., 21(6), pp.473-479. https://doi.org/10.4150/KPMI.2014.21.6.473
  2. M. N. Le, M. S. Lee, 2020 : Solvent Extraction of Co(II) and Cu(II) from Hydrochloric Acid Solution of Spent Lithium-ion Batteries Containing Li(I), Mn(II), and Ni(II), J. of Korean Inst. of Resources Recycling, 29(5), pp.73-80. https://doi.org/10.7844/KIRR.2020.29.5.73
  3. Y. C. Cho, J. W. Ahn, J. Y. Lee, 2020 : Selective Extraction of Cobalt and Nickel in the Presence of Magnesium from Sulphate Solutions by Versatic Acid 10, J. of Korean Inst. of Resources Recycling, 29(4), pp.51-57. https://doi.org/10.7844/KIRR.2020.29.4.51
  4. Y. C. Cho, K. H. Kim, J. W. Ahn, et al., 2020 : Application of Multistage Concentration (MSC) Electrodialysis to Concentrate Lithium from Lithium-Containing Waste Solution, Metals 2020, 10(7), pp.851-862. https://doi.org/10.3390/met10070851
  5. Lee, M.S., Kim, S.B. and Chae, J.G., 2010 : Adsorption of Ni(II), Co(II) and Mg(II) from Sulfuric Acid Solution by Diphonix Resin, J. Miner. Soc. Korea, 23(3), pp.183-189.
  6. Agatzini-Leonardou, S., Dimaki, D., 1994 : Recovery o.f nickel and cobalt form low-grade nickel oxide ores by the technique of extraction in heaps using dilute sulphuric acid at ambient temperature, Greek patent GR1001555, 22 March.
  7. Whittington, B.I., Muir, D., 2000 : Pressure acid leaching of nickel laterite : a review, Mineral Processing and Extractive Metallurgy Review, 21, pp.527-600. https://doi.org/10.1080/08827500008914177
  8. W. Urbanska, 2020 : Recovery of Co, Li, and Ni from Spent Li-Ion Batteries by the Inorganic and/or Organic Reducer Assisted Leaching Method, Minerals, 10(555), pp. 1-13. https://doi.org/10.3390/min10060555
  9. J. Y. Park, S. G. Ryu, 2019, KR, 10-2019-0088997.
  10. S. Kursunoglu, M. Kaya, 2019 : Hydrometallurgical processing of nickel laterites-a brief overview on the use of solvent extraction and nickel/cobalt project for the separation and purification of nickel and cobalt, Mining, 58(2), pp. 131-144..
  11. D. S. Flett, 2005 : Solvent extraction in hydrometallurgy: the role of organophosphorus extractants, Journal of Organometallic Chemistry, 690, pp.2426-2438. https://doi.org/10.1016/j.jorganchem.2004.11.037
  12. N. Safitri, M. Z. Mubarok, R. Winarko, et al., 2018 : Recovery of nickel and cobalt as MHP from limonitic ore leaching solution: Kinetics analysis and precipitate characterization, AIP Conference Proceedings 1964, 020030, pp. 1-10.
  13. W. S. Chen, H. J. Ho, 2018 : Recovery of Valuable Metals from Lithium-Ion Batteries NMC Cathode Waste Materials by Hydrometallurgical Methods, Metals, 8(321), pp.1-16.
  14. S. H. Joo, D. J. Shin, C. H. Oh, et al., 2016 : Selective extraction of nickel from cobalt, manganese and lithium in pretreated leach liquors of ternary cathode material of spent lithium-ion batteries using synergism caused by Versatic 10 acid and LIX 84-I, Hydrometallurgy, 159, pp. 65-74. https://doi.org/10.1016/j.hydromet.2015.10.012
  15. K. C. Sole, J. B. Hiskey, 1995 : Solvent extraction of copper by Cyanex 272, Cyanex 302 and Cyanex 301, Hydrometallurgy, 37, pp.129-147. https://doi.org/10.1016/0304-386X(94)00023-V
  16. C. Bourget, B. Jakovljevic, D. Nucciarone, 2005 : CYANEX 301 binary extractant systems in cobalt/nickel recovery from acidic sulphate solutions, Hydrometallurgy, 77, pp. 203-218. https://doi.org/10.1016/j.hydromet.2004.12.005
  17. Mihaylov, I., Krause, E., Okita, Y., et al., 2000 : The development of a novel hydrometallurgical process for nickel and cobalt recovery from Goro laterite ore, CIM Bull., 93(1041), pp.124-130.
  18. P. E. Tsakiridis, S. L. Agatzini, 2004 : Simultaneous solvent extraction of cobalt and nickel in the presence of manganese and magnesium from sulfate solutions by Cyanex 301 Hydrometallurgy, 72(2004), pp.269-278. https://doi.org/10.1016/S0304-386X(03)00180-4
  19. J. Kyle, 2010 : Nickel laterite processing technologies where to next?, ALTA 2010 Nickel/Cobalt/Copper Conference, pp.1-36.
  20. Golder Associates, 2010 : Nouvlle caledonie, GORO PROJECT, VALE INCO LIMITED, 2(5).
  21. L. Y. Wang, M. S. Lee, 2016 : Solvent Extraction of Zr(IV) and Hf(IV) from Sulfuric Acid Solutions by Acidic Extractants and Their Mixtures with TBP, J. of Korean Inst. of Resources Recycling, 25(2), pp.3-9. https://doi.org/10.7844/KIRR.2016.25.2.3
  22. K. C. Sole, 2011 : Organophosphorus acids as extractants, GECAMIN IESC 2011.
  23. N. A. Sayar, M. Filiz, A. A. Sayar, 2009 : Extraction of Co(II) and Ni(II) from concentrated HCl solutions using Alamine 336, Hydrometallurgy, 96, pp.148-153. https://doi.org/10.1016/j.hydromet.2008.09.005