• The Korean Journal of Physiology and Pharmacology
• /
• v.21 no.2
• /
• pp.215-223
• /
• 2017

The effects of acidic pH on several voltage-dependent ion channels, such as voltage-dependent $K^+$ and $Ca^{2+}$ channels, and hyperpolarization-gated and cyclic nucleotide-activated cation (HCN) channels, were examined using a whole-cell patch clamp technique on mechanically isolated rat mesencephalic trigeminal nucleus neurons. The application of a pH 6.5 solution had no effect on the peak amplitude of voltage-dependent $K^+$currents. A pH 6.0 solution slightly, but significantly inhibited the peak amplitude of voltage-dependent $K^+$ currents. The pH 6.0 also shifted both the current-voltage and conductance-voltage relationships to the depolarization range. The application of a pH 6.5 solution scarcely affected the peak amplitude of membrane currents mediated by HCN channels, which were profoundly inhibited by the general HCN channel blocker $Cs^+$ (1 mM). However, the pH 6.0 solution slightly, but significantly inhibited the peak amplitude of HCN-mediated currents. Although the pH 6.0 solution showed complex modulation of the current-voltage and conductance-voltage relationships, the midpoint voltages for the activation of HCN channels were not changed by acidic pH. On the other hand, voltage-dependent $Ca^{2+}$ channels were significantly inhibited by an acidic pH. The application of an acidic pH solution significantly shifted the current-voltage and conductance-voltage relationships to the depolarization range. The modulation of several voltage-dependent ion channels by an acidic pH might affect the excitability of mesencephalic trigeminal nucleus neurons, and thus physiological functions mediated by the mesencephalic trigeminal nucleus could be affected in acidic pH conditions.

• The Korean Journal of Ecology
• /
• v.17 no.1
• /
• pp.69-78
• /
• 1994

The acidic deposition (wet) was collected at three different locations; representative industrial (Kun-Jang industrial areas), semiindustrial (Kunsan City) and nonindustrial (Daeya areas) region between March, 1991 and June, 1993. Samples were analyzed for major chemical components along with pH. Also the responses of Hypnum filunzaeforme to the acidic deposition adjusted to pH 4.6, 3.6 and 2.6 with 1:4 molar ratio of nitric to sulfuric acid were investigated. Seasonal variation of pH showed the lowest in early spring and the highest in summer. The annual mean concentrations of $S0_4^{2-},\;NO_3^{-}\;and\;NH_4^{+}$ were 2.94 (81.0%), 0.48 (13.2%) and 0.21 (5.78%) mg/l in industrial region and 0.61 (64.21%), 0.25 (26.3%) and 0.9 (9.5%) mg /I in nonindustrial region, respectively. $S0_4^{2-}$ contents of industrial region was 4 times higher than those of nonindustrial region. The ratio of $S0_4^{2-}\;to\;NO_3^{-}$ was 4.75~7.35 in industrial region and 0.69-6.36 in nonindustrial region. The acidic deposition near industrial region was associated with excess ions, expecially $S0_4^{2-}$. Nitrate reductase activity(NRA) of mosses was inhibited by acidic deposition in both regions. The time required for the maximum NRA induction by 2mM $KNO_3$ was shortened in mosses collected from industrial region. Photosynthesis of H. plumaejorme began to decrease with acidic deposition by pH below 4.6, and was completely inhibited at pH 2.6 in both regions. Water potential of mosses treated with acidic deposition was almost constant during 18 days, however after withholding the supply of acidic deposition, it was rapidly decreased.

• Microbiology and Biotechnology Letters
• /
• v.20 no.1
• /
• pp.40-45
• /
• 1992

Acidic nucleotidase from Asfiergilius nlger has been partially purified by Sepharose CL-6B gel filtration and DEAE-Sephacel ion exchange chromatography. The optimum pH and temperature for the enzyme reaction with 5'-AMP or 3'-AMP as a substrate were 4.5 and 55%, respectively. However, the optimum temperature became 70% when p-nitrophenyl phosphate was used as a substrate. The enzyme was stable at acidic pH. The enzyme activity was not affected by addition of various nucleotides, nucleosides and inorganic phosphates. Ferric, aluminium, vanadate and molybdate ions inhibited the enzyme activity dramatically. In kinetic studies, $K_m$), values for 3'-AMP, 5'-AMP and p-nitrophenyl phosphate were 1.39 mM, 1.5 mM and 5.77 mM, respectively. The substrate efficiency ($V_{max}/K_m$) shows 3'-AMP is the prefered substrate for the enzyme among tested substrates.

• Food Science of Animal Resources
• /
• v.31 no.4
• /
• pp.551-556
• /
• 2011

The objective of this study was to determine the resistance of Cronobacter sakazakii in acidic environments. The D-values of CAFM2 (ATCC 29544), EB 1, EB 5, and EB 41 at pH 2.5 in TSB were significantly (p<0.05) higher when cells were adapted at pH 4.5 in TSB for 5-h then when cells were not adapted at pH 4.5 in TSB. The D-values of CAFM2, EB1, and EB 41 at pH 2.5 in TSB were significantly (p<0.05) higher when cells were adapted at pH 4.5 in TSB for 10-h then when cells were not adapted at pH 4.5 in TSB. The D-values of CAFM2 and EB1 at pH 2.5 in TSB were significantly (p<0.05) higher when cells were adapted at pH 4.5 in TSB for 24-h then when cells were not adapted at pH 4.5 in TSB. The adaptation of C. sakazakii to mild acidic environments may result in increased resistance to severe acidic environments. The D-values of all test strains at pH 2.5 in TSB were significantly (p<0.05) higher when cells were cultured at pH 4.5 then when they were cultured at pH 7.2 in TSB. These data indicate that cells cultured in mildly acidic environments may result in increased resistance to severe acidic environments. The acid adaptation of C. sakazakii showed an increased resistance to acidic environments. The acid adaptation response of C. sakazakii has important implications for food safety, which should be considered when food preservation measures are developed.

• Korean journal of food and cookery science
• /
• v.9 no.1
• /
• pp.43-51
• /
• 1993

Buckwheat protein isolate was tested for the effects of pH, addition of sodium chloride and heat treatment on solubility, emulsion capacities, emulsion stability, surface hydrophobicity, foam capacities and foam stability. The solubility of buckwheat protein isolate was affected by pH and showed the lowest value at pH 4.5, the isoelectric point of buckwheat protein isolate. The solubility significantly as the pH value reached closer to either ends of the pH, i.e., pH 1.0 and 11.0. The effects of NaCl concentration on solubility were as follows; at pH 2.0, the solubility significantly decreased when NaCl was added; at pH 4.5, it increased above 0.6 M; at pH 7.0 it increased; and at pH 9.0 it decreased. The solubility increased above $80^{\circ}C$, at all pH ranges. The emulsion capacity was the lowest at pH 4.5. It significantly increased as the pH approached higher acidic or alkalic regions. At pH 2.0, when NaCl was added, the emulsion capacity decreased, but it increased at pH 4.5 and showed the maximum value at pH 7.0 and 9.0 with 0.6 M and 0.8 M NaCl concentrations. Upon heating, the emulsion capacity decreased at acidic pH's but was maximised at pH 7.0 and 9.0 on $60^{\circ}C$ heat treatment. The emulsion stability was the lowest at pH 4.5 but increased with heat treatment. At acidic pH, the emulsion stability increased with the increase in NaCl concentration but decreased at pH 7.0 and 9.0. Generally, at other pH ranges, the emulsion stability was decreased with increased heating temperature. The surface hydrophobicity showed the highest value at pH 2.0 and the lowest value at pH 11.0. As NaCl concentrationed, the surface hydrophobicity decreased at acidic pH. The NaCl concentration had no significant effects on surface hydrophobicity at pH 7.0, 9.0 except for the highest value observed at 0.8 M and 0.4 M. At all pH ranges, the surface hydrophobicity was increased, when the temperature increased. The foam capacity decreased, with increased in pH value. At acidic pH, the foam capacity was decreased with the increased in NaCl concentration. The highest value was observed upon adding 0.2 M or 0.4 M NaCl at pH 7.0 and 9.0. Heat treatments of $60^{\circ}C$ and $40^{\circ}C$ showed the highest foam capacity values at pH 2.0 and 4.5, respectively. At pH 7.0 and 9.0, the foam capacity decreased with the increased in temperature. The foam stability was not significantly related to different pH values. The addition of 0.4 M NaCl at pH 2.0, 7.0 and 9.0 showed the highest stability and the addition of 1.0 M at pH 4.5 showed the lowest. The higher the heating temperature, the lower the foam stability at pH 2.0 and 9.0. However, the foam stability increased at pH 4.5 and 7.0 before reaching $80^{\circ}C$.

• Microbiology and Biotechnology Letters
• /
• v.38 no.3
• /
• pp.273-277
• /
• 2010

Undecylprodiginine and streptorubin B are red-pigmented antibiotics produced by Streptomyces coelicolor A3(2). In this study, we investigated the correlation between productivity of these red-pigmented antibiotics and stress of pH shock. Biosynthesis of these red-pigmented antibiotics is enhanced at acidic pH shock on solid R2YE medium. The optimal pH shock is pH 4 which led to 1.6 fold and two-fold increase in the production of undecylprodiginine and streptorubin B as compared with control, respectively. In addition, the extract of pH 4 shocked cells exhibited a remarkable activity against Trichophyton mentagrophytes. However, neutral and basic pH shock did not give raise to promote a production of these red-pigmented antibiotics as well as antifungal activity. Thus, although the acidic pH shock is simple and easy method, it should be extremely effective approach to enhance a productivity of these red-pigmented antibiotics and other secondary metabolites.

• Journal of Environmental Science International
• /
• v.8 no.2
• /
• pp.255-261
• /
• 1999

To investigate the effects of strong acidic electrolytic water on the chloroplast, barley leaves were treated with strong acidic electrolytic water(pH 2.5). And to investigate the effects of weak acidic electrolytic water on the chloroplast development, etiolated barley leaves were treated with weak acidic electrolytic water(pH 6.5) during greening period. Chl contents, Fo, Fv, and Chl fluorescence quenching coefficient in barley leaves were measured during and after treatment of acidic electrolytic water. The following results were obtained. Chl a, b, and carotenoid were decreased with treatment of strong acidic electrolytic water. Chl contents were significantly decreased than that of the control after 5 min. These results provide evidence that the strong acidic electrolytic water dissimilate the Chl and so that the value of Fo was slightly increased. The strong acidic electrolytic water damaged PS II because Fo was increased and Fv, Fm, and Fv/Fm ratio were decreased. qP, qNP and qE were decreased. On the other hand qI was increased than that of the control. But Chl content and Chl fluorescence patterns were a little changed as the pH increase over 4.0 Chl a, b, and carotenoid were increased with treatment of weak acidic electrolytic water during greening period. Chl contents were significantly increased than that of control after 12 hours greening. These results provide evidence that the weak acidic electrolytic water accelerated the chlorophyll synthesis. And the weak acidic electrolytic water accelerated PS II development because Fv, Fm, qP and Fv/Fm ratio were increased than that of the control.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.511-514
• /
• 2015

A pretreatment process of cellulose decomposition to a monosaccharide plays an important role in the cellulosic ethanol production using the lignocellulosic biomass. In this study, a cellulosic ethanol was produced by using acidic hydrolysis and enzymatic saccharification process from the lignocellulosic biomass such as rice straw, sawdust, copying paper and newspaper. Three different pretreatment processes were compared; the acidic hydrolysis ($100^{\circ}C$, 1 h) using 10~30 wt% of sulfuric acid, the enzymatic saccharification (30 min) using celluclast ($55^{\circ}C$, pH = 5.0), AMG ($60^{\circ}C$, pH = 4.5), and spirizyme ($60^{\circ}C$, pH = 4.2) and also the hybrid process (enzymatic saccharification after acidic hydrolysis). The yield of cellulosic ethanol conversion with those pretreatment processes were obtained as the following order : hybrid process > acidic hydrolysis > enzymatic saccharification. The optimum fermentation time was proven to be two days in this work. The yield of cellulosic ethanol conversion using celluclast after the acidic hydrolysis with 20 wt% sulfuric acid were obtained as the following order : sawdust > rice straw > copying paper > newspaper when conducting enzymatic saccharification.

• Korean Journal of Agricultural Science
• /
• v.50 no.4
• /
• pp.713-721
• /
• 2023

Soil acidification challenges global food security by adversely influences soil fertility and agricultural productivity. Carbonized agricultural residues present a sustainable and ecofriendly way to recycle agricultural waste and mitigate soil acidification. We evaluated the effects of organic amendments on lettuce growth and soil chemical properties in two soils with different pH levels. Carbonized rice husk was produced at 600℃ for 30 min and rice husk was treated at 1% (w·w^-1). Carbonized rice husk increased soil pH, electrical conductivity, total carbon content, and nitrogen content compared with untreated and rice husk treatments. Furthermore, this study found that lettuce growth positively correlated with soil pH, with increasing soil pH up to pH 6.34 resulting in improved lettuce growth parameters. Statistical correlation analysis also supported the relationship between soil pH and lettuce growth parameters. The study findings showed that the use of carbonized rice husk increased the constituent elements of lettuce, such as carbon, nitrogen, and phosphate content. The potassium content of lettuce followed a similar trend; however, was higher in acidic soil than that in non-acidic soil. Therefore, improving the pH of acidic soil is essential to enhance agricultural productivity. It is considered advantageous to use agricultural residues following pyrolysis to improve soil pH and agricultural productivity.

• Journal of Environmental Science International
• /
• v.29 no.8
• /
• pp.801-808
• /
• 2020

In this study, an effective fluorescence pH sensor based on conjugated polyelectrolyte micelles (CPMs) was devised for detecting extremely acidic conditions. An amphiphilic coumarin derivative (CC12-N), a building block, was prepared, into which an ionizable amino group, aryl amine, was incorporated as a potential hydrophilic moiety. This monomer displays self-assembled micelle formation in extremely acidic pH ranges, giving a hydrophobic π-extended conjugated system at the inner part and hydrophilic functionality at the periphery, resulting in efficient fluorescence intensity enhancement. This new micelle-based fluorescence provides an efficient sensing platform for detecting very low pH values in the presence of competing substances.