• 농약과학회지
• /
• 제7권3호
• /
• pp.169-175
• /
• 2003

물 중 prochloraz 의 잔류특성과 농자재를 이용하여 볍씨 종자소독 후 폐액을 쉽고 안전하게 폐기하는 기술을 확립하고자 실험을 수행하였다. Prochloraz의 물 중 반감기는 $4.0\sim5.0$일 이었고, 가수분해는 알카리 조건에서 빠르게 분해되었으며, 물 중 광분해는 $5530J/cm^2$ 조사시 87.7% 의 분해력을 보여 광분해가 비교적 용이하게 일어남을 알 수 있었다. 종자소독한 볍씨를 물로 세척했을 때 prochloraz 용출율은 처음 l회 세척시 $9.2\sim10.6%$로 최고에 이르렀으며, 세척 횟수가 증가하면 할수록 용출율은 감소하여 4회 부터는 3% 이하로 떨어졌다. 희석액 중 농자재 첨가에 의한 prochloraz의 제거율은 석회 100 g/L 처리시 93.6%로 가장 높았으며, 돈분퇴비 90.7, 활성탄 89.4, 볏짚재 78.0, 사양토 70.3, 제오라이트 47.0, 볏짚 24.1% 순으로 감소하였다. 폐액 중 prochloraz의 분해는 석회 > 볏짚재 > 돈분퇴비 > 사양토 > 볏짚 순 이었다. 또한 유휴지 토양에 희석액을 살포한 후 prochloraz는 처리 35일에 90% 이상이 소실되었다.

• 분석과학
• /
• 제24권2호
• /
• pp.94-104
• /
• 2011

본 연구에서는 양쪽성 메조 다공성 실리카를 다양한 조건(용매, 계면활성제와 올리고머의 량, 용액의 pH)에서 합성하였다. 메조 다공성 실리카를 사용하여 염소 소독으로 인해 음용수 중에 미량 존재하는 변이원성 물질인 MX (3-chloro-4-(dichloromethyl)-5-hydroxy-2-(5H)-furanone)의 흡착에 관한 특성을 연구하였다. 소수성과 친수성의 양쪽성 폴리우레탄 올리고머를 사용하여 합성된 메조다공성 실리카의 경우 뛰어난 흡착특성을 나타내었다. 그리고 보조 계면 활성제의 경우에는 비이온성이며 분자량이 큰 폴리 에틸렌 프로필렌 옥사이드(PEO-PPO)를 사용하여 합성된 메조 다공성 실리키가 가장 좋은 흡착 특성을 보였다.

• Journal of Photoscience
• /
• 제1권1호
• /
• pp.31-37
• /
• 1994

Photoirradiation at > 300 nm onto a suspension of platinized TiO$_2$ (TiO$_2$-Pt) particles in an aqueous solution. of N$_{\varepsilon}$-carbamyI-L-lysine (Lys(CONH)$_2$) induced the selective N-cyclization of Lys(CONH$_2$) into almost optically pure L-pipecolinic acid (PCA) under argon atmosphere at ambient temperature. Among various TiO$_2$-Pt catalysts, a P-25 (Degussa) powder platinized via impregnation from chloroplatinic acid followed by hydrogen reduction at 753 K exhibited the highest photocatalytic activity for Lys(CONH$_2$) consumption and L-PCA production. GC-MS analyses of L-PCA obtained photocatalytically from $^{15}$N$\alpha$-Lys(CONH$_2$) revealed the selective formation $^{15}$N-substituted L-PCA. This implies that the mechanism for L-PCA production contains selective cleavage of C$_{\varepsilon}$-N bond and intramolecular alkylation at $\alpha$-amino group. Effect of pH on the rate of this photocatalytic reaction was investigated in detail and compared with the pH-dependent charge distribution in Lys(CONH$_2$) molecule. It is clarified that protonation-deprotonation of $\alpha$-amino group gives marked influence on the rate and selectivity of the photocatalytic reaction. On the basis of these results, it is concluded that the selective production of optically pure L-PCA, especially in an acidic suspension of TiO$_2$-Pt, was attributed to the enhanced protonation of $\alpha$-amino group to prevent undesirable oxidation by photogenerated positive holes and blocking of $\varepsilon$-amino group to yield racemic Schiff base intermediate.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.16-16
• /
• 2012

Mg and its alloys have been of great interest because of their low density of 1.7, 30% lighter than Al, but their wide applications have been limited because of their poor resistances against corrosion and/or abrasion. Corrosion resistance of Mg alloys can be improved by formation of anodic films using anodic oxidation method in aqueous electrolytes. Plasma electrolytic oxidation (PEO) is one of anodic oxidation methods by which hard anodic films can be formed as a result of micro-arc generation under high electric field. PEO method utilize not only substrate elements but also chemical components in electrolytes to form anodic films on Mg alloys. PEO films formed on AM50 magnesium alloy in an acidic fluozirconate electrolyte were observed to consist of mainly $ZrO_2$ and $MgF_2$. Liu et al reported that PEO coating on AM30 Mg alloy consists of $MgF_2$-rich outer porous layer and an MgO-rich dense inner layer. PEO films prepared on ACM522 Mg die-casting alloy in an aqueous phosphate solution were also reported to be composed of monoclinic $Mg_3(PO_4)_2$. $CeO_2$-incorporated PEO coatings were also reported to be formed on AZ31 Mg alloys in $CeO_2$ particle-containing $Na_2SiO_3$-based electrolytes. Magnesium tin hydroxide ($MgSn(OH)_6$) was also produced on AZ91D alloy by PEO process in stannate-containing electrolyte. Effects of $OH^-$, $F^-$, $PO{_4}^{3-}$ and $SiO{_3}^{2-}$ ions and alloying elements of Al and Sn on the formation of PEO films on pure Mg and Mg alloys and their protective properties against corrosion have been investigated in this work. $PO{_4}^{3-}$, $F^-$ and $SiO{_3}^{2-}$ ions were observed to contribute to the formation of PEO films but $OH^-$ ions were found to break down the surface films under high electric field. The effect of pulse current on the formation of PEO films will be also reported.

• 한국염색가공학회지
• /
• 제7권4호
• /
• pp.61-73
• /
• 1995

Inorganic salts have negative or positive effects on the rates of many chemical reactions and also the rates of acidic and alkaline hydrolysis of carboxylic esters. The direction of salt effects on the hydrolysis of ester depends on the charge of esters. It is expected that the rate of the alkaline hydrolysis of Poly(ethylene terephthalte)(PET), polymeric solid carboxytic polyester with carboxyl end group at the polymer end, is also influenced by inorganic salts. In the present work, to clarify the effect of divalent cations on the alkaline hydrolysis of PET, many salts with divalent cations like $MgCl_{2},CaCl_{2},SrCl_{2},BaCl_{2},$ were added to the aqueous alkaline solutions. Then PET was hydrolyzed with aqueous NaOH solution having many salts under various conditions. Some conclusions obtained from the experimental results were summarized as follows. Many salts with various divalent cations increased or decreased the reaction rate of alkaline hydrolysis of PET depending on their electrophilicity, hydration property, ability of ion pair formation, solubility, and the degree of interactions between divalent cations and anions, etc. The hydrolysis was interrupted in the order of $Ca^{+2} and was generally accelerated in the order of $Ba^{+2}. It was inferred from the increase in ΔS$^*$and the decrease in the ΔG$^*$that the divalent cations $Sr^{+2}$ and $Ba^{+2}$attracted by PET increased the collision frequency between carbonyl carbon and $OH^{-}$ion and then accelerated the reaction rate. $Mg^{+2}$and $Ca^{+2}$decreased the reaction rate because of their strong interaction with $OH^{-}$.

• 대한화학회지
• /
• 제38권12호
• /
• pp.885-890
• /
• 1994

텅스텐 전극을 작업전극으로 사용하여 산성수용액에서 아닐린의 전기화학적 중합을 순환 전압-전류법으로 연구하였다. 아닐린 분자는 2전자 전이에 의하여 탈수소 아닐린이온으로 산화하고, 중성아닐린을 공격하여 중합체를 만든다. 그러나 백금전극의 경우와는 다르게 중합과정은 주로 아닐린의 산화에 의해서 일어난다. 성장속도는 백금전극의 경우와 비교하여 느린 것으로 나타났다. 분해생성물은 벤조퀴논이 아니라 p-phenylenediamine(p-PDA)으로 확인 되었는데 이것은 1.0 V 이하의 전위에서 p-PDA의 산화가 관측되지 않은 결과와도 일치한다.

• Carbon letters
• /
• 제12권3호
• /
• pp.143-151
• /
• 2011

Bagasse fly ash (BFA) is one of the important wastes generated in the sugar industry; it has been studied as a prospective low-cost adsorbent in the removal of congo red (CR) from aqueous solutions. Chemical treatment with $H_2O_2$ was applied in order to modify the adsorbability of the raw BFA. Batch studies were performed to evaluate the influence of various experimental parameters such as dye solution pH, contact time, adsorbent dose, and temperature. Both the adsorbents were characterized by Fourier-transform infrared spectrometer, energy-dispersive X-ray spectrophotometer and nitrogen adsorption at 77 K. Equilibrium isotherms for the adsorption of CR were analyzed by Langmuir, Freundlich and Temkin models using non-linear regression technique. Intraparticle diffusion seems to control the CR removal process. The obtained experimental data can be well described by Langmuir and also followed second order kinetic models. The calculated thermodynamic parameters indicate the feasibility of the adsorption process for the studied adsorbents. The results indicate that BFA can be efficiently used for the treatment of waste water containing dyes.

• 환경위생공학
• /
• 제20권2호
• /
• pp.47-55
• /
• 2005

The World Health Organization(WHO, 1998) and the United States Environmental Protection Agency (USEPA, 1992) recommended $2{\mu}\;guranium/{\ell}$ in drinking water as a guideline. The Korea Institute for Environmental Research recently reported that the radioactive pollution in ground water was almost negligible In Korea$(1999\~2002)$. Cs were cast into beads(2mm in wet form) and treated with hexamethylene diisocyanate for stability in acidic aqueous solution through cross-linking of the beads surfaces. The removal study was carried out in a static batch system and a flow system. In the static system, a certain amount of sample water was confined in a vessel and beads(dry weight 0.5g) were packed into it in order to adsorb uranium for a certain period of time. Afterwards the remaining uranium in water vessel was determined by inductively coupled plasma mass spectrometry. The effective pH range was 4 to 8. The smaller the size of beads, the better the removal efficiency. Furthemore, the lower the flow rates, the higher the removal efficiency. The results showed that chitosan beads can be effectively used for the removal of uranium contained in water.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.141-144
• /
• 2000

Highly open porous polymer matrices are required for high density cell seeding, efficient nutrient, and oxygen supply to the cells cultured in the three dimensional matrices. However, there are severe problems of mass transfer limitations within the cell/scaffolds culture system. Thus we hypothesize that continuos-flow culture conditioning of cells with the scaffolds may improve the cell viability and the differentiated function. In this study, we fabricated porous PLGA scaffolds by using gas-foaming/salt-leaching method as previous described. Viscous PLGA gel paste contains ammonium bicarbonate particulates, acting as a gas-foaming agent as well as a salt-leaching porogen, were cast into Teflon mold and dried. Ammonium bicarbonate salt upon contact to an acidic aqueous solution evloves gaseous ammonia and carbon dioxide by itself. And we conjugated galactose moiety [AGA; $N-(aminobuty1)-O-{\beta}-D-galactopyranosyl-(1{\rightarrow}4)-D-glucoamide]$ to the terminal end group of a PLGA to increase the cell adhesion and matain the differentiated function of hepatocytes. Cell-seeded scaffolds were secured in a flow bioreactor chamber and exposed to continuous flow at 5 ml/min. As a result of our study, the high yield of hepatocytes attachment was accomplished by increasing the concentration of PLGA-AGA conjugate in polymer scaffolds and cells in the scaffolds under continuos flow condition maintained a high level of viability and albumin secretion rate of cultured hepatocytes showed a higher level that of control groups.

• 한국식품영양과학회지
• /
• 제3권1호
• /
• pp.69-76
• /
• 1974

The method of amino acid sequence determination from the C-terminal amino acid is proposed and mass spectrometric identification of thiohydantoins described previously. In this paper was discussed the fragmentation of thiohydantoin-ring by deutero substitution and model tripeptide have been degraded through three stages each, with interpretable results. The conditions employed in this method are mild enough for biological materials. The main features of the method are the following. 1. Thiohydantoins were formed in a non-aqueous medium a mixture of acetic anhydride, acetic acid and ammonium thiocyanate. 2. Mass sepectra of thiohydantoins derived from 20 amino acids were obtained with a mass spectrometer, JEOL model JMS-06H. 3. Cleavage of peptidyl thiohydantoin was made with an acidic from of a cation-exchange resin. (Amberlite IR-120) 4. Separation of the cleaved thiohydantoin and the parent peptide less one amino acid moiety was made by chromatography on a Sephadex G-10 column. 5. The peptide fraction was concentrated by freezedrying. 6. Thiohydantoin derivative of carboxyl terminal amino acid residue was introduced with a direct inlet probe in methanol solution.