• Environmental Engineering Research
• /
• v.22 no.2
• /
• pp.149-156
• /
• 2017

Chromium(III) recovery from tanning wastewater by means of adsorption on activated carbon and elution with sulfuric acid was studied. Tests were carried out at laboratory scale on an effluent of industrial origin. Initially, proteinaceous materials and fats were separated via sieving followed by ultrafiltration. The chemical composition of the sample thus precleansed was (in g/L): 1.09 chromium(III); 10.36 sulfate; 11.10 sodium; 9.57 chloride; 0.40 proteinaceous materials; and 0.20 fats. Adsorptions were made at 20, 30, and $40^{\circ}C$, establishing what temperature favored chromium(III) uptake. At $40^{\circ}C$, the maximum cation fixation was 40.2 mg/g, and the lowest content in an equilibrium solution was 3.9 mg/L. As regards sodium, chloride, and sulfate, the concentrations before and after the treatment were similar. Likewise, it was found that protons were also retained, modifying the pH of the liquid medium. Adsorption isotherms were analyzed using the Langmuir, Temkin, and Freundlich models. Finally, the extraction of the adsorbed tanning agent with sulfuric acid was evaluated. A recovery of 96.5% was achieved with 0.9 N at $70^{\circ}C$ (13.23 g/L $Cr^{3+}$; 42.98 g/L sulfate; and 0.40 g/L NaCl).

• Microbiology and Biotechnology Letters
• /
• v.26 no.1
• /
• pp.55-60
• /
• 1998

For an ideal extractive bioconversion in aqueous two-phase systems, the product has to be preferentially partitioned into the phase opposite to the one in which the biocatalyst is located. Partitioning behaviors of Lactobacillus helveticus IAM 11090 and lactic acid in aqueous two-phase systems composed a polycation, poly(ethylenimine) (PEI), and an uncharged polymer (hydroxyethyl)cellulose (HEC) were investigated. L. helveticus cells were preferentially partitioned to the HEC-rich top phase while about 85% of lactic acid was partitioned to the PEI-rich bottom phase. These results indicate that extraction of charged, low molecular weight products in an aqueous two-phase systems can be promoted by using an oppositely charged polymer as one of the phase-forming polymer. By the ideal partitioning of the cells and lactic acid, an aqueous PEI/HEC two-phase system can be used as a potential system for the extractive lactic acid fermentation of cheese whey.

• Korean Journal of Veterinary Research
• /
• v.23 no.1
• /
• pp.69-79
• /
• 1983

The present studs was undertaken to observe the histopathological changes on the cardiac and skeletal muscles, and liver of rabbits fed a commercial ration, either alone or with supplements of Zinc (3,000mg/kg. of diet, as sulfate), Copper (1,500mg/kg. of diet, as sulfate), Linoleic acid (3% of diet), Zinc with Linoleic acid and Copper with Linoleic acid. In the skeletal muscle, light microscopic changes observed were cloudy swelling, hyaline degeneration, atrophy, fragmentation and coagulative necrosis of muscle fibers, and proliferation of fibroblasts and infiltration of mononuclear cells. Especially, in rabbits fed with supplements of Zinc with Linoleic acid and Copper with Linoleic acid, calcification with muscle fibers progressing to necrosis were often observed. In the myocardium, loss of muscle fibers with necrosis and vacuolization, hyaline degeneration, hemorrhage and congestion were observed. In the liver, congestion and necrosis of hepatocytes, and centrilobular necrosis were observed. Differences of histological changes among the experimental groups was not marked.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.2
• /
• pp.313-321
• /
• 2000

This research is to remove heavy metals from AMD(Acid Mine Drainage) using AFMR(Anaerobic Floating Media Reactor) process. Two AFMR were operated at HRT(hydraulic retention time) of 3 days. COD/sulfate ratio from 0.3 to 0.8, temperature from $30^{\circ}C$ to $35^{\circ}C$, and alkalinity of 1.000mg/l(as $CaCO_3$). At COD/sulfate($SO{_4}^{2-}$) ratio of 0.5 and temperature of $35^{\circ}C$, the ratio of reduced sulfate($SO{_4}^{2-}$)/removed COD(mg/mg) kept about 1 and the reactor achieved 99.99% of Cr, Pb anee Fe, 98% of Cd, and 90% of Mn removal efficiencies, respectively. Decreasing temperature to $30^{\circ}C$ increased the ratio of reduced sulfate($SO{_4}^{2-}$)/removed COD(mg/mg) to 1.37. Amount of sulfate reduction maximized at the temperature of $30^{\circ}C$ and the COD/sulfate ratio of 0.4 in the influent and then removal efficiencies of heavy metals were 99.99% of Fe, 99.99% of Pb, 99,99% of Cr, 97.3% of Mn, 99.9% of Zn, 99.9% of Cd and 99.9% of Cu.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.3
• /
• pp.75-82
• /
• 2008

Two UASB reactors were operated to investigate the effect of high concentration of sulfate on anaerobic digestion of propionate using an upflow anaerobic sludge blanket (UASB) reactor. An organic loading rate of $1.2kg\;COD/m^3{\cdot}d$ and a hydraulic retention time of 1.6 d were maintained during this study. In the absence of sulfate, the UASB reactor achieved about 95% removal of chemical oxygen demand whereas in the presence of $2,000\;SO_4^{2-}mg/L$, the COD removal rate decreased to 83% due probably to the inhibition of dissolved sulfide inhibition. Interactions between the methane producing bacteria (MPB) and sulfate reducing bacteria (SRB) were measured to investigate the competition between MPB and SRB. The MPB consumed average 58% of the available electron donors at $COD/SO_4^{2-}$ ratio of 1. Propionate was consumed mainly by SRB, converting sulfate into sulfide and suppressing the methane production. The specific methanogenic activity (SMA) using acetate and propionate increased as microorganism acclimated to the substrate.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.541-547
• /
• 2016

In this experiment we investigated the influence of various anions including oxalic acid encountered as solution phase in soil on the adsorption and desorption of sulfate in Chungwon Bt soil. The effect of chloride and nitrate on the adsorption of sulfate was not significant, suggesting that sulfate was better able to compete for adsorption sites at concentrations studied, in contrast to the large reduction in the amount of chloride adsorbed in the presence of sulfate. The results of competition for sorption sites between sulfate and anion showed that the simultaneous presence of two anions in solution was effective in reduction of competing anion at a maximum value of adsorption, due to the similar adsorption mechanism for anion competition. Therefore, the variation in the buffer power of the acids will produce a change in the strength and amount of adsorption and the competitive ability.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.19 no.1
• /
• pp.59-63
• /
• 2021

Copper sulfate is widely used as a fungicide and pesticide. Acute copper sulfate poisoning is rare but potentially lethal in severe cases. Copper sulfate can lead to cellular damage of red blood cells, hepatocytes, and myocytes. Toxic effects include intravascular hemolysis, acute tubular necrosis and, rhabdomyolysis. A 76-year-old man presented with vomiting and epigastric pain. He had ingested a copper-containing fungicide (about 13.5 g of copper sulfate) while attempting suicide 2 hours prior to presentation. From day 3 at the hospital, laboratory findings suggesting intravascular hemolysis were noted with increased serum creatinine level. He was treated with a chelating agent, dimercaptosuccinic acid (succimer). His anemia and acute kidney injury gradually resolved with a 19-day regimen of succimer. Our case suggests that succimer can be used for copper sulfate poisoning when other chelating agents are not available.

• Korean Journal of Animal Reproduction
• /
• v.23 no.3
• /
• pp.229-237
• /
• 1999

The influence of ascorbic acid (Asc) and ferrous sulfate (Fe$^{2＋}$) on capacitation, acrosome reaction and fertility in vitro was investigated in boar frozen-thawed spermatozoa with or without preincubation. The addition of 0-1.0 mM Fe$^{2＋}$ to sperm suspensions during preincubation increase acrosome reaction (P＜0.05) and oocyte penetration. These increase are also associated with addition of 0~0.5 mM Asc, but the penetration rates were higher in those without than with sperm preincubation. The addition of 0.1 mM Asc than 0.5 mM in medium with Fe$^{2＋}$ were significantly (P＜0.05) higher on acrosome reaction at 2 h after sperm preincubation. No significant differences, however, were observed in penetration rates among the concentrations of Asc. On the other hand, when preincubation medium containing the Asc was supplemented with 0.1mM Fe$^{2＋}$, the percentage of spermatozoa acrosome-reacted were significantly (P＜0.05) higher than in medium wothout Fe$^{2＋}$, on the contrary, the penetration rate was significantly (P＜0.05) low during in-vitro fertilization. These findings indicate some apparent effects of Fe$^{2＋}$ or Asc addition on acrosome reaction and the fertilizing potential by sperm preincubation.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.3
• /
• pp.55-60
• /
• 1998

The sodium ${\alpha}-sulfo$ fatty acid vinyl ester oligomers, which are oligomer type surfactants were prepared by polymerization with fatty acid vinyl acetate. The ${\alpha}-sulfonation$ of fatty acid vinyl ester oligomers were carried by direct addition of sulfur trioxide. The dispersing performance of oligomer type anionic surfactants and sodium dodecyl sulfate(SDS) in the aqueous suspension of iron oxide and titanium dioxide particles was evaluated by particle size distribution and zeta-potential measurement. As results, the particles of iron oxide and titanium dioxide were flocculated by addition of small amount of oligomer type anionic surfactants and sodium dodecyl sulfate(SDS), then the flocks redispersed by more addition of oligomer type anionic surfactants and SDS. The flocculation, redispersion process was observed in lower concentration range of oligomer type anionic surfactants than SDS. Especially, the dispersing action of sodium ${\alpha}-sulfo$ palmitic acid vinyl ester oligomer was better than sodium ${\alpha}-sulfo$ lauric acid vinyl ester oligomer.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.432-436
• /
• 2001

In this study, calcium sulfate(gypsum) powder was obtained using waste sulfuric acid and stainless refinery sludge by- produced from chemical reagent and the iron industry, by the neutralization of waste sulfuric acid. As variables for the experiment the mole ratio of the H$_2$SO$_4$ : Ca(OH)$_2$, the pH, the reaction temperature and time, the amount of catalyst were used. The crystal shape and microstructure of obtained powder were observed by XRD and SEM, and the thermal property was investigated by DTA. As the NaCl is added 0~20wt% as a catalyst to the H$_2$SO$_4$ : Ca(OH)$_2$, system it can be found that the crystal shape goes through the processes as follows : gypsum dihydratlongrightarrowgypsum hemihydrate＋gypsum dihydratelongrightarrowgypsum hemihydrate. And gypsum hemihydrate is $\beta$-type as the result of DTA. As waste sulfuric acid and stainless refinery sludge were used, the pH of reacted solution (which was 0.8) was rapidly raised up to 8~9 by the addition of stainless sludge and gypsum dihydrate was produced as a by-product. Therefore, it was found that stainless refinery sludge is sufficiently applicable for the neutralization of waste sulfuric acid.