• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.10
• /
• pp.14-27
• /
• 2009

Polar Code was proposed by Turkish professor Erdal Arikan in 2006 as an idea that splitted input channel is increasing the cutoff rate. The channel polarization consisted of code sequences with symmetric high rate capacity in a given B-DMC(Binary-input Discrete Memoryless Channel) W. The symmetric capacity is the highest rate achievable subject to using the input letters of the channel with equal probability. The channel polarization is said to a set of given N independent outputs of B-DMC W. In other word, N increases when N is a set of binary-input channels {$W^{(i)}_N\;:\;1{\leq}\;i\;{\leq}\;N$}, in I{WN(i)} as the fraction of indices is near to 1, which is approaching to I(W), and it is near to 0, then to 1-I(W), where I(W) presents high rates in reliable wireless communication channel as inputs of W with equal frequences. After all, {WN(i)} is shown to be a state of channel coding. On the based on this Polar codes, this paper analyzes Polar coding and decoding of Arikan and propose Radix4 Polar coding newly.

• Food Science and Preservation
• /
• v.30 no.3
• /
• pp.459-471
• /
• 2023

The Bayesian network (BN) model was applied to analyze the characteristic variables that affect compliance with safety inspections of farmed eel during the production stage, using the data from 30,063 cases of eel aquafarm safety inspection in the Integrated Food Safety Information Network (IFSIN) from 2012 to 2021. The dataset for establishing the BN model included 77 non-conforming cases. Relevant HACCP data, geographic information about the aquafarms, and environmental data were collected and mapped to the IFSIN data to derive explanatory variables for nonconformity. Aquafarm HACCP certification, detection history of harmful substances during the last 5 y, history of nonconformity during the last 5 y, and the suitability of the aquatic environment as determined by the levels of total coliform bacteria and total organic carbon were selected as the explanatory variables. The highest achievable eel aquafarm noncompliance rate by manipulating the derived explanatory variables was 24.5%, which was 94 times higher than the overall farmed eel noncompliance rate reported in IFSIN between 2017 and 2021. The established BN model was validated using the IFSIN eel aquafarm inspection results conducted between January and August 2022. The noncompliance rate in the validation set was 0.22% (15 nonconformances out of 6,785 cases). The precision of BN model prediction was 0.1579, which was 71.4 times higher than the non-compliance rate of the validation set.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.67-72
• /
• 2020

The fifth generation (5G) mobile communication has an impact on the human life over the whole world, nowadays, through the artificial intelligence (AI) and the internet of things (IoT). The low latency of the 5G new radio (NR) access is implemented by the state-of-the art technologies, such as non-orthogonal multiple access (NOMA). This paper investigates a practical issue that in NOMA, for the practical channel models, such as fading channel environments, the successive interference cancellation (SIC) should be performed on the stronger channel users with low power allocation. Only if the SIC is performed on the user with the stronger channel gain, NOMA performs better than orthogonal multiple access (OMA). Otherwise, NOMA performs worse than OMA. Such the superiority requirement can be easily implemented for the channel being static or slow varying, compared to the block interval time. However, most mobile channels experience fading. And symbol by symbol channel estimations and in turn each symbol time, selections of the SIC-performing user look infeasible in the practical environments. Then practically the block of symbols uses the single channel estimation, which is obtained by the training sequence at the head of the block. In this case, not all the symbol times the SIC is performed on the stronger channel user. Sometimes, we do perform the SIC on the weaker channel user; such cases, NOMA performs worse than OMA. Thus, we can say that by what percent NOMA is better than OMA. This paper calculates analytically the percentage by which NOMA performs better than OMA in the practical mobile communication systems. We show analytically that the percentage for NOMA being better than OMA is only the function of the ratio of the stronger channel gain variance to weaker. In result, not always, but almost time, NOMA could perform better than OMA.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1299-1305
• /
• 2017

In this paper, we consider a beamforming game between the transmitters in a two-user multiple-input single-output interference channel using limited feedback and investigate how each transmitter is able to find a modified strategy from the quantized channel state information (CSI). In the beamforming game, each of the transmitters (i.e., a player) tries to maximize the achievable rate (i.e., a payoff function) via a proper beamforming strategy. In our case, each transmitter's beamforming strategy is represented by a linear combining factor between the maximum ratio transmission (MRT) and the zero forcing (ZF) beamforming vectors, which is the Pareto optimal achieving strategy. With the quantized CSI, the transmitters' strategies may not be valid because of the quantization errors. We propose a modified solution, which takes into account the effects of the quantization errors.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.3
• /
• pp.149-159
• /
• 2011

Nuclear power utilities should establish a site-specific groundwater monitoring program for early detection of unplanned radioactive material's releases which can occur due to degradation of systems, structures and components of the nuclear power plants in order to keep the impact of the unplanned releases on the environment and the residents as low as reasonably achievable. For this end, groundwater flow on site should be evaluated based on characterization of the hydrogeology of a site of concern. This paper aims to provide data necessary for establishing groundwater monitoring program which is currently considered at Kori nuclear power plant 1 by characterizing groundwater flow system on the site based on the existing hydrogeological studies and related documents, and by modeling tritium transport. The results showed that the major groundwater flow direction was south-west and that most of groundwater entered a southern and eastern seas. Although the tritium plume also released into the sea, its rate was delayed by dewatering sump.

• Journal of Advanced Navigation Technology
• /
• v.15 no.3
• /
• pp.386-391
• /
• 2011

CRU (contiguous resource unit) composed of adjacent OFDMA subcarriers is popularly adopted for recently developed cellular communication standards, e.g. IEEE 802.16e/m. If multiple CRUs having different SNR are assigned to a mobile station, and multiple packet streams are independently transmitted by using H-ARQ transmission, an achievable data rate can be varied according to the channel allocation method of re-transmission packets and new transmission packets. In this paper, the optimum channel allocation method for the above stated problem, and several sub-optimum channel allocation methods to reduce the computational complexity of the optimum allocation method are proposed. According to the simulation results, a sub-optimum allocation method assigning a CRU having good SNR to new transmission packet shows marginal performance loss compared with optimum method, however, the computational complexity can be significantly reduced.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8C
• /
• pp.617-626
• /
• 2008

Opportunistic Beamforming (OBF) offers a way to provide the multiuser diversity even in slow fading channel by using randomly generated beam weights, leading to the substantially reduced feedback in the form of the instantaneous SNR from users. In spite of the advantage of the reduced feedback, the imperfect channel estimation might influence the quality of the estimated SNR and channel scheduler so bad that the selected AMC level would be higher than the achievable rate of the actual channel, resulting the corruption of transmitted packet. In this paper, we propose a conservative link adaptation, where the estimated SNR is scaled down by a conservative factor which minimizes the variance of the maximum difference between the actual channel SNR and the resultant SNR. To support the proposed scheme, we analyze the statistics of the difference of the channel SNR and the estimated SNR. Simulation results show that the introduction of conservative factor achieves more than two-fold performance improvement in the presence of channel estimation error and the fairness of PF scheduler is maintained when the least squared channel estimator is applied.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.23-35
• /
• 2009

This study proposes a methodology for estimating representative section travel times using individual vehicle travel information under the ubiquitous transportation environment (UTE). A novel approach is to substantialize a concept of dynamic node-links in processing trajectory data. Also, grouping vehicles was conducted to obtain more reliable travel times representing characteristics of individual vehicle travels. Since the UTE allows us to obtain higher accuracy of vehicle positions, travel times for each lane can be estimated based on the proposed methodology. Evaluation results show that less than 10% of mean absolute percentage error was achievable with 20% of probe vehicle rate. It is expected that outcome of this study is useful for providing more accurate and reliable traffic information services.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.9-15
• /
• 2013

Recent works on ad hoc network study have shown that achievable throughput can be made to scale linearly with the number of receive antennas even if the transmitter has only a single antenna. In this paper, we propose a non-parametric linear minimum mean square error (MMSE) receiver for achieving further gain in performance when the channel state information at receiver (CSIR) of interferers is imperfect. The key feature to make our approach effective is to exploit the autocorrelation of the received signal. In fact, by incorporating the desired channel information on top of the observations including interference and noise only, the proposed method achieves large fraction of the optimal MMSE transmission capacity without transmission rate loss. From the SINR analysis as well as transmission capacity simulations in realistic ad hoc network system, we show that the proposed non-parametric linear MMSE receiver brings substantial performance gain over existing multiple receive antenna algorithms.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.2
• /
• pp.263-267
• /
• 2013

The continuing demand for increasingly slimmer and brighter liquid crystal display (LCD) panels has led to an increased focus on the role of light guide panels (LGPs) or optical films that are used to obtain diffuse, uniform light from the backlight unit (BLU). The most basic process in the production of such BLU components is the micromachining of V-shaped grooves. Thus, given the current trend, micromachining of V-shaped grooves is expected to play increasingly important roles in today's manufacturing technology. LCD BLUs comprise various optical elements such as a LGP, diffuser sheet, prism sheet, and protector sheet with V-shaped grooves. High-aspect-ratio patterns are required to reduce the number of sheets and enhance light efficiency, but there is a limit to the aspect ratio achievable for a given material and cutting tool. Therefore, this study comprised a series of experimental evaluations conducted to determine the machining limit in microcutting V-shaped grooves on electroless nickel plated die materials when using single-crystal diamond tools with point angles of $20^{\circ}-80^{\circ}$. Cutting performance was evaluated at various cutting speeds and depths of cut using different machining methods and machine tools. The experimental results are that V-shaped patterns with angles of $80^{\circ}$ or up can be realized regardless of the machining conditions and equipment. Moreover, the feed rate has little effect on machinability, and it is thought that the fly-cut method is more efficient for shallow patterns.