• 한국결정성장학회지
• /
• 제10권3호
• /
• pp.271-277
• /
• 2000

투광성 $TiO_2$박막을 다량의 물을 사용한 티타늄알콕사이드 수용계로부터 sol-gel법으로 제조하였다. sol의 제조를 위해 각각 1 mole의 titanium(IV)iso-propoxide, acetylacetone과 8 mole의 isopropyl-alcohol로부터 킬레이트 화합물을 만들었다. 그리고 sol의 안정성을 위한 0.02~0.50 mole의 HCI과 코팅 접착성을 위한 0.3 mole의 polyethylene glycol을 함유한 50 mole의 수용액을 엄밀히 제어하여 킬레이트 화합물에 적하하였다. 제조된 sol로부터 dipping, 건조 및 $400^{\circ}C$에서 열처리하여 $TiO_2$박막을 제조하였으며, XRD, SEM, UV-visible spectrometer 등을 이용하여 특성을 검토하였다. TTIP : AcAc : IPA : $H_2$O : PEG : HCl의 몰비가 1 : 1 : 8 : 50 : 0.3 : 0.15인 조성을 갖는 중성 sol은 30일까지도 안정한 상태를 유지하였고 코팅성이 양호하였다. 30회까지 반복 침지하고 건조 및 열처리한 anatase상 $TiO_2$박막은 평활한 표면과 두께 약 2 $\mu\textrm{m}$의 치밀한 미세구조를 보였다. 제조한 $TiO_2$박막은 가시광선 영역에서 약 80%의 투과도를 나타내었다.

• 한국결정성장학회지
• /
• 제4권2호
• /
• pp.199-209
• /
• 1994

Titanium tetra iso-propoxide와 Lead acetate trihydrate를 출발물질로 사용하여 제조한 졸을 현미경용 soda-lime-silica 슬라이드 유리, Si-Wafer 및 Sapphire 기판 위에 Dip-coating법으로 박막을 제조하였으며, 안정한 졸을 얻기 위하여 Acetylacetone을 첨가하였다. 졸의 점도, 조성등의 영향을 조사하였고, 조성변화, 막의 두께 변화, 열처리 온도에 따른 가시영역에서의 투과율과 굴절율 및 IR Spectra를 측정하였으며, $PbTiO_3$ 박막의 결정 생성 유무를 XPD로 검토하였다. 또하 EDX로 슬라이드 유리에서 박막으로의 확산 유무를 조사하였다. 제조된 졸은 20일동안 침전없는 안정한 상태를 유지하였다. 가시영역에서의 투과율은 열처리온도와 막의 두께가 증가함에 따라 감소하였고, flat한 투과특성을 나타내었다. 슬라이드 유리 위에 코팅한 $PbTiO_3$ 박막은 $600^{\circ}C$에서 열처리한 경우 Pyrochlore형이 나타났고, Si-Wafer와 Sapphire 기판 위에 코팅할 경우에는 $600^{\circ}C$에서 Pyrochlore형이 나타나기 시작하였으며, 열처리 온도가 높아짐에 따라 $800^{\circ}C$에서 $PbTi_3O_7$상이 나타났다.

• 대한화학회지
• /
• 제55권2호
• /
• pp.177-182
• /
• 2011

이케토형 리간드는 thiophene-2-aldehyde와 acetylacetone의 Knoevenagel 축합반응을 통해 합성하였으며, 이를 이용하여 Cu(II), Ni(II) 및Co(II) 염화물의 착물을 합성하였다. 모든 착물의 특성은 다양한 물리-화학적 방법으로 규명하였다. 몰전기전도도 결과로부터 이들 착물이 이온성을 가짐을 알았다. 전자 및 EPR 스펙트럼을 통해 구리(II) 이온이 사각평면 기하구조를 가짐을 알았다. 구리(II) 착물과 CTDNA(송아지 thymus DNA)의 상호작용을 흡수 스펙트럼과 순환 전압전류법으로 연구하였다. $k_{obs}$ 대 [DNA]의 도시는 선형을 보였는데, 이는 유사-1차반응을 의미한다. 순환 전압전류 그림으로부터 구리(II) 착물이 각각 -0.240 V와 -0.194 V의 $E_{1/2}$ 값을 갖는 일전자 Cu(II)/Cu(I) 산화-환원 쌍에 대해 준가역적임을 알았다. CTDNA를 첨가한 경우, $E_{1/2}$값이 각각168 mV와 18 mV 이동하였고 Ep 값도 감소하였다. CTDNA의 존재 하에 $E_{1/2}$이 이처럼 이동하는 것은 구리(II) 착물이 CTDNA에 강하게 결합됨을 의미한다.

• 공업화학
• /
• 제16권1호
• /
• pp.150-152
• /
• 2005

아세틸아세톤이 치환된 금속-킬레이트 착물에 polyethylene glycol를 첨가시켜 안정하고 균일한 졸 용액을 얻은 뒤, 페로보스카이트 $La_{0.2}Ca_{0.8}MnO_3$의 분말과 펠렛을 합성하였다. 반응과정에 대한 구조변화를 FT-IR과 XRD 분석기로 추적하였고, 입자 크기와 균일도를 살펴보았다. 그리고 온도의 함수로서의 자기적 특성도 관찰하였다.

• 한국진공학회지
• /
• 제8권4A호
• /
• pp.425-431
• /
• 1999

$Pb(Zr_{0.52}, Ti_{0.48})O_3$ (PZT) thick films as an actuating material with conducting oxides, $(La_{0.5}Sr_{0.5}) CoO_3$ (LSCO), have been fabricated by sol-gel method for Optical Micro-Electro-Mechanical System (MEMS) devices, in which PZT/LSCO/SiO2 structures were used. In order to improve the adhesion to LSCO solution in order to enhance the wetting behavior of a water-based LSCO precursor solution and further to improve the adhesion between LSCO and $SiO_2$ layers. PZT films were made using 1-3 propanediol based precursor solution which has a high viscosity and a boiling point appropriate for thick film fabrication. In the precursor solution, Ti-propoxied and Zr-propoxied are partially substituted with acetylacetone to achieve the solution stability while maintaining reactivity. Crack free PZT films (0.8~1$\mu\textrm{m}$) have been successfully fabricated at crystallization temperatures above $700^{\circ}C$. Dielectric constants and dielectric losses of the PZT films were 900~1200and 2~5%, respectively. Piezoelectric constant $d_{33}$ of the PZT films constrained by a substrate were 200pm/V at 100kV/cm.

• Journal of Ginseng Research
• /
• 제9권2호
• /
• pp.154-162
• /
• 1985

We report a newassay method on the measurement of the catalase activity, whose utilzation value is considered to be remarkable in the field of plant biochemistry. We named this method as a De-Coupling method. The essence of de-coupling method is the separation between the enzyme reaction and the indicator reaction. The optimum condition of the enzyme reaction was found to be following: on addition of 1 ml of substrate (H2O2: 20mM) to the fixture of the crude extract of enzyme (volume: 0.2 ml) and the ammonium phosphate buffer (volume: 1.8 ml; 0.93 M phosphate, 1.6M NHB, 2.5 M methanol, pH 7.0). After 30, 60 and 90 seconds of the enzyme reactions are proceeded, the reactions are terminated by 25% of tai-chloro-acetate (final concentration of 5%), respectively. The precipitated materials by tai-chloro-acetate was removed by the centrifugation (2000g, 10minutes). Formaldehyde produced in the enzymatic reaction was reacted with 2ml of acetylacetone (60mM). The indicator reaction -(HANTSCH REAKT10N)- in which lutidine is formed, was proceeded for 60 minutes at $25^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• 제23권10호
• /
• pp.1394-1398
• /
• 2002

A novel copper(II) membrane electrode based on diphenylisocyanate bis(acetylacetone) ethylenediimine (DIBAE), as a new hexadentates Schiff's base was prepared. The electrode exhibited a Nernstian response for Cu$^{2+}$ ions over a wide concentration range (1.0 ${\times}$ 10$^{-1}$ to 1.0 ${\times}$ l0$^{-6}$ M) with a limit of detection of 6.0 ${\times}$ 10$^{-7}$ M (39 ppb). The sensor shows a fast response time (15s) and the membrane can be used for more than 4 months without observing any major deviation. The electrode revealed very good selectivity with respect to many cations including alkali, alkaline earth, transition and heavy metal ions. The proposed sensor could be used in a pH range of 3.0-7.5. It was applied to the direct potentiometric determination of copper in black tea, and in wastewater of copper electroplating samples. The electrode was also used in potentiometric titration of the copper(II) ion with EDTA.

• Applied Microscopy
• /
• 제23권2호
• /
• pp.1-10
• /
• 1993

The effect of electrolyte on the extraction replicas of the precipiates in 3% Si steel was investigated. Three Kinds of electrolyte, 2% Nital solution (2% nitric acid+methanol; acid solution),, Sodium Citrate solution (5% sodiumcitrate+1% KBr+0.5KI+$H_{2}O$; aqueous neutral solution) and 10% AA solution (10% acetylacetone+ 1% tetramethylammoniumchloride+methanol; non-aqueous neutral solution), were compared. The preciptiates in 3% Si steel were dissolved in 2% Nital, but they were not dissolved in the Sodium Citrate and 10% AA solution. In Sodium Citrate solution, however, large second artifacts were introduced during sample preparation. Therefore 10% AA solution was found to be most useful for the preparation of extraction replica. The electrolysis condition of a matrix and precipitates were also checked by the measurement of potential-current curve in 10% AA solution. The matrix was electrolyzed at -400mV with respect to SCE(Saturated Calomel Electrode). In contrats precipitates were electrolyzed above 300mV. Precipitates were respected to be stable in 10% AA solution in the range of $-380mV{\sim}-300mV$ usually used to prepare extraction replicas.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2609-2615
• /
• 2013

A series of fluorene-carbazole copolymers containing the pendant phosphor chromophore $Ir(absn)_2(acac)$ (absn: 2-(1-naphthyl)benzothiazole; acac: acetylacetone) were designed and synthesized via Yamamoto coupling. In the film state, these copolymers exhibited absorption and emission peaks at approximately 389 and 426 nm, respectively, which originated from the fluorene backbone. However, in electroluminescent (EL) devices, a significantly red-shifted emission at approximately 611 nm was observed, which was attributed to the pendant iridium(III) complex. Using these copolymers as a single emission layer, polymer light-emitting devices with ITO/PEDOT:PSS/polymer:DNTPD/TmPyPb/LiF/Al configurations exhibited a saturated red emission at 611 nm. The attached iridium(III) complex had a significant effect on the EL performance. A maximum luminous efficiency of 0.85 cd/A, maximum external quantum efficiency of 0.77, maximum power efficiency of 0.48 lm/W, and maximum luminance of 883 $cd/m^2$ were achieved from a device fabricated with the copolymer containing the iridium(III) complex in a 2% molar ratio.

• Journal of Photoscience
• /
• 제10권2호
• /
• pp.185-187
• /
• 2003

The preparation and the photophysics of organometallic Pt(II) and Ir(III) complexes with 6-ch1oro-3-phenylpyridazine (H6Clppdz) are reported. $K_2$PtCl$_4$ and IrCl$_3$ㆍn$H_{2}O$ cleanly cyclometalate with H6Clppdz, forming the corresponding chloro-bridged dimers, (6Clppdz)Pt($\mu$-Cl)$_2$Pt(6Clppdz) and (6Clppdz)$_2$Ir($\mu$-Cl)$_2$Ir(6Clppdz)$_2$ in good yield. These chloro-bridged dimers are cleaved with acetylacetone (Hacac) to give the corresponding monomer, (6Clppdz)Pt(acac) and (6Clppdz)$_2$ Ir(acac), respectively. Both complexes show bright orange luminescence at room temperature and the emission wavelengths are different depending on the metal and the structure of complexes. (6Clppdz)Pt(acac) shows two sharp emission bands in shorter wavelength ($\lambda$$_{em}$=541 and 580 nm), while (6Clppdz)$_2$ Ir(acac) shows a broad emission band in longer wavelength ($\lambda$$_{em}$=615 nm). Strong spinorbit coupling due to the heavy metal atom allows for the formally forbidden mixing of the $^1$MLCT with the $^3$MLCT and $^3$$\pi$-$\pi$$^{*}$ states.