• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.10 no.1
• /
• pp.44-50
• /
• 2007

Purpose: The role of plain, abdominal radiography in childhood constipation has not been fully evaluated. The aim of this study was to determine the accuracy and reliability of scoring systems assessing a fecal load on plain, abdominal radiographs in children with functional constipation. Methods: Plain, abdominal radiographs from 38 constipated children and 39 control children were examined by four independent inspectors, pediatric residents. Four inspectors independently scored the radiographs according to three different scoring systems Barr, Blethyn, and Leech. No clinical information about the patients was available to the inspectors. Each abdominal radiograph was evaluated on two separate occasions, one week apart. Kappa coefficients were calculated as indicators of inter-and intra-inspector variability, coefficients <0.20, 0.21~0.40, 0.40~0.60, 0.61~0.80 and 0.81~1.00 were considered to indicate poor, fair, moderate, good, and very good agreement, respectively. Results: The Leech score showed the highest reproducibility: the inter-inspector agreement was uniformly very good on two separate occasions (${\kappa}$ values of 0.88, 0.91, 0.92, 0.86 in the first time and 0.81, 0.88, 0.89, 0.84 in the second time). Agreement using the Barr score was good (${\kappa}$ values of 0.66, 0.67, 0.69, 0.66 in the first time and 0.68, 0.65, 0.71, 0.68 in the second time). However, agreement for the Blethyn score was the lowest of the three scoring systems. The Leech scoring system had the highest sensitivity and specificity compared to the Barr scoring system for the diagnosis of functional constipation by plain, abdominal radiographs. Conclusion: The Leech score appeared to be a more accurate and reliable method because of its high sensitivity and specificity for evaluating the fecal load on plain, abdominal radiographs in children with functional constipation. Therefore, the Leech scoring system was found to be the most useful for assessment for the degree of constipation on plain, abdominal radiographs in children.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.10-18
• /
• 2014

Purpose: Among different PET/CT devices which are composed of same PET model but different CT models, SUV, usually used for quantitative evaluation, was measured to assess the accuracy of follow up scans in different PET/CT and confirm that interequipment compatibility is useful in arranging the PET/CT exam appointment. Materials and Methods: Using ACR PET Phantom, PET NEMA IEC Body Phantom, SNM Chest Phantom and Ge-68 cylinder Phantom, $SUV_{mean}$ and $SUV_{max}$ was measured by 3 different models of PET/CT (Discovery 690, Discovery 690Elite and Discovery 710, GE) made in same company. ANOVA was used to evaluate the significant difference in the result. Results: In the result, the average of $SUV_{max}$ was D690 (25 mm-1.82, 16 mm-1.75, 12 mm-1.73, 8 mm-1.44), D690E (25 mm-1.76, 16 mm-1.92, 12 mm-1.78, 8 mm-1.55) and D710 (25 mm-1.84, 16 mm-1.89, 12 mm-1.77, 8 mm-1.61) in ACR Phantom, D690 (25 mm-2.26, 16 mm-2.25, 12 mm-1.92, 8 mm-1.85), D690E (25 mm-2.45, 16 mm-2.25, 12 mm-2.05 8 mm-1.91) and D710(25 mm-2.49, 16 mm-2.20, 1 2mm-2.30, 8 mm-2.05) in PET NEMA IEC Body Phantom, D690-1.04, D690E-1.10 and D710-1.09 in SNM Chest Phantom and D690-0.81, D690E-0.81, D710-0.84 in Ge-68 cylinder Phantom. The differences between average SUV of 4 phantoms were $SUV_{mean}$-1.87%, $SUV_{max}$-2.15%. And also as a result of ANOVA analysis, there was no significant difference statistically. Conclusion: If different models of PET/CT have same specification of PET system, there was no significant difference in $SUV_{mean}$ and $SUV_{max}$ even though they have different CT system. And also differences of $SUV_{mean}$ and $SUV_{max}$ in phantom images were under 5% which many manufacturers recommend. Therefore, follow up scan will be possible using different PET/CT if it has same specification of PET system with the previous PET/CT. This information will enable the accurate comparative analysis when conducting follow up scans and be helpful to schedule PET/CT exam more effectively.

• Korean Journal of Animal Reproduction
• /
• v.9 no.1
• /
• pp.9-30
• /
• 1985

The study was carried out to find out the changes of the sex hormone levels in the milk of Holstein cows during the reproductive stages such as the estrous cycle, pregnancy and periparturient period. The FSH, LH, estradiol-17$\beta$ and progesterone from the milk samples were assayed by radioimmunoassay methods. The results of this study were summarized as follows: 1. The levels of progesterone and estradiol-17$\beta$ were similar among inter-quarters, but they were higher in after milking than before milking times, with no statistical significance. 2. The milk progesterone levels during the estrous cycles reached a peak mean level of 3.55$\pm$0.26ng/$m\ell$ at 15 days after estrus and they did not show any differences among the length of estrous cycles. The estradiol-17$\beta$ levels during the estrous cycles showed a peak level of 36.40$\pm$2.38pg/$m\ell$ at estrus, and decreased(17.20$\pm$0.46 pg/$m\ell$ to 18.65$\pm$1.26pg/$m\ell$) at luteal phase. 3. The FSH levels during the estrous cycles ranged from 2.25$\pm$0.23mIU/$m\ell$ to 4.35$\pm$0.24mIU/$m\ell$ showing significant changes. The LH levels during the estrous cycles gradually increased and remained a peak level of 10.90$\pm$0.36mIU/$m\ell$ from 20 to 25 days after estrus. 4. The progesterone levels during the pregnancy were decreased from 30 to 60 days after artificial insemination, and therafter continuously increased until 240 days. The estradiol-17$\beta$ levels during the pregnancy were 24.56$\pm$1.19pg/$m\ell$ at day 30 after artificial inseminaton, and increased rapidly until 180 days. The levles were agagin decreased by 26.17$\pm$3.03pg/$m\ell$ until 210 days and markedly increased by 68.00$\pm$8.70pg/$m\ell$ until 240 days. 5. The prolactin levels during the pregnancy were 31.27$\pm$2.31ng/$m\ell$ and 42.60$\pm$2.37ng/$m\ell$ at day 150 and 240 after artificial insemination respectively. The LH levels during the pregnancy reached a peak of 27.47$\pm$7.90mIU/$m\ell$ at day 30 after artificial insemination, and thereafter gradually decreased. 6. The progesterone levels during the periparturient period reached a peak of 4.61$\pm$0.34ng/$m\ell$ at day 3 prepartum, and thereafter gradually decreased, and showed 2.05$\pm$0.60ng/$m\ell$ at day 7 postpartum. The estradiol-17$\beta$ levels during the periparturient period showed high level from 207.23$\pm$6.04pg/$m\ell$ at day 1 prepartum to 239.90$\pm$13.90pg/$m\ell$ at day 2 prepartum, and thereafter began to decline and reached 51.87$\pm$1.72pg/$m\ell$ at by 7 postpartum. 7. The prolactin levels during the periparturient period showed relatively higher level at the time of parturition. The LH levels during the periparturient period rnage from 6.32$\pm$0.32mIU/$m\ell$ to 13.90$\pm$1.37mIU/$m\ell$ showing significant changes. 8. The progesterone levels(4.6$\pm$0.8ng/$m\ell$) of the pregnant cows were significantly higher than those (1.84$\pm$1.4ng/$m\ell$) of nonpregnant cows. The cows of artificial insemination from 61 to 90 days after parturition showed higher progesterone levels. 9. During 20 to 25 days after artificial insemination, the accuracy of pregnancy diagnosis from milk progesterone levels were 94.4% for nonpregnant cows(<2.3ng/$m\ell$), and 75.0% for pregnant cows( 3.2ng/$m\ell$). The average overall accuracy of pregnancy prediction for nonpregnant and pregnant cows 83.3% 10. The results obtained this study suggest that the understanding of the endocrinological mechanisms by means of milk hormone analysis during the estrous cycle, pregnancy and parturition would give the basic information needed for increasing efficiency of reproduction. This study would not only provide an accurate method of the early pregnancy diagnosis by milk progesterone levels but also contribute to the research of providing the method of detecting of FSH levels in milk, which was difficult in blood serum.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.12
• /
• pp.45-52
• /
• 2015

With the rising interest in the environment, more attention on ecological restoration for damaged slope surface to restore its original state has been drawn. Generally, the most useful method is vegetation based spray work. This method uses green soil including sewage sludge, sawdust, paper sludge, and weathered granite soil. However, because there are neither accurate information nor test values about green soil, green soil is often lost by environmental factors such as rainfalls and strong winds. To solve the problem of green soil, it is necessary to prepare design standards about green soil, and conduct studies to deal with green soil loss in consideration of various variables including basic material property, soil quality of slope surface, and weather. This study was conducted in the mixture of green soil and eco-friendly soil stabilizer. With green soil, basic material property test and compaction test were conducted for the analysis on the basic characteristics of green soil. In the mixture with soil stabilizer at a certain ratio, we conducted shear strength test depending on the ratio in order to analyze the maximum shear strength, cohesion and the change in internal friction angles. Furthermore, in the mixture ratio of green soil and soil stabilizer, which is the same as the ratio in the shear strength test, an inclination of slope surface was made in laboratory for the analysis on erosion and germination rate. Finally, this study evaluated the most effective and economic mixing ratio of soil stabilizer to cope with neighboring environmental factors. According to the test, the shear strength of green soil increased up to 51% rely onto the mixing ratio of and a curing period, and its cohesion and internal friction angle also gradually increases. It is judged that the mixture of soil stabilizer was effective in improving shear strength and thereby increased the stability of green soil.

• Journal of Radiation Protection and Research
• /
• v.35 no.1
• /
• pp.34-42
• /
• 2010

With the expanded use of radiation in modern medical practices, the most important issue in regards to efforts to reduce individual exposure dose is quality assurance. Therefore in order to study the present condition of quality assurance, the Gwangju Metropolitan City area was divided into five districts each containing ten hospitals. Four experiments were conducted: a reproducibility experiment for kVp, mA, and examination time (sec) intensity of illumination; half-value layer (HVL) measurement; and beam perpendicularity test matching experiment. The tube voltage reproducibility experiment for all fifty hospitals resulted in a 95.33% passing rate and mA and examination time both resulted in a 77.0% passing rate. The passing rate for intensity of illumination was 86.0% and 52.0% for HVL, which was the lowest passing rate of all four factors. For the beam perpendicularity test matching experiment, generally the central flux is matched to within $1.5^{\circ}$. Of all fifty hospitals 30.0% were beyond $3^{\circ}$. The results of the survey showed that 58% responded that they knew about quality assurance cycle. All fifty respondents stated that they have not received any training in regards to quality assurance at their current place of employment. Although quality assurance is making relative progress, the most urgent issue is awareness of the importance of quality assurance. Therefore, the implementation of professional training focusing on safety management and accurate quality assurance of radiation will reduce the exposure to radiation for radiologists and patients and higher quality imaging using less dosage will also be possible.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.1
• /
• pp.13-22
• /
• 2009

The composite resin, due to its esthetic quality, is considered the material of choice for restoration of anterior teeth. To get a satisfactory result in the composite resin restorations, it is necessary to choose right shade. At present, most of the commercial composite resins are based on the Vita Lumin shade guides or shade guides that are provided by their company, but color differences among them might be expected even using the same shade in various materials. This study is to measure color differences between various light-cured composite resins and shade guides and to provide the clinicians with information which may aid in improved color match of esthetic restoration. Four kinds of light-cured composite resins (Gradia Direct (GD), Z250 (Z250), Clearfil AP-X (AP-X), Esthet X (E X)) and shade guides with A2 and A3 shade were used. Three specimens of each material and one specimen of each shade guide were made. Each composite resin was filled into the Teflon mold (1.35 mm depth, 8 mm diameter), followed by compression, polymerization and polishing with wet sandpaper. Shade guides were grinded with polishing stones and rubber points to a thickness of approximately 1.35 mm. Color characteristics were performed with a spectrophotometer(color i5, GretagMacbeth, USA). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$, $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E^*ab$) between composite resins and shade guides. CIE standard D65 was used as the light source. The results were as follows : 1. Among the $L^*$, $a^*$, $b^*$ values of most of 4 kinds of composite resin specimens which are produced by same shade, there were significant differences(p<0.05). 2. Among all 4 kinds of composite resin specimens which are produced by same shade, there were color differences that is perceptible to human eye(${\Delta}E^*>3.3$). 3. Between most of composite resin specimens investigated and their corresponding shade guides, there were color differences that is perceptible to human eye(${\Delta}E^*>3.3$). 4. In the clinical environment, it is recommended that custom shade guides be made from resin material itself for better color matching. Shade guides supplied by manufacturers or Vita Lumin shade guide may not provide clinicians a accurate standard in matching color of composite resins, and there are perceptible color differences in most of products. Therefore, it is recommended that custom shade guides be made from resin material itself and used for better color matching.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.209-218
• /
• 2012

Repeatability and reproducibility in solid weight and effective porosity measurements have been discussed using 8 core samples with different diameters, lengths, rock types, and effective porosities. Further, the effect of temperature on the effective porosity measurement has been discussed as well. Effective porosity of each sample has been measured 7 times with vacuum saturation method with vacuum pressure of 1 torr and vacuum time of 80 minutes. Firstly, effective porosity of each sample is measured one by one, so that it can provide a reference value. Then for reproducibility check, effective porosity measurements with vacuum saturation of 2, 4, and 8 samples simultaneously have been performed. And finally, repeated measurements for 3 times for each sample are made for repeatability check. Average deviation from the reference set in solid weight showed 0.00 $g/cm^3$, which means perfect repeatability and reproducibility. For effective porosity, average deviations are less than 0.07% and 0.05% in repeatability and reproducibility test sets, respectively, which are in good agreement too. Most of porosities measured in reproducibility test lies within the deviation range in repeatability test sets. Thus, simultaneous vacuum saturation of several samples has little impact on the effective porosity measurement when high vacuum pressure of 1 torr is used. Air temperature can cause errors on submerged weight read and even effective porosity, because it is closely related to the temperature, density, and buoyancy of water. Consequently, for accurate measurement of effective porosity in a laboratory, efforts for maintaining air or water temperature constant during the experiment, or a temperature correction from other information are needed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.12
• /
• pp.1929-1936
• /
• 2014

This study investigated purchasing behaviors of processed foods in high school students (male 94 and female 85) in the Yongin region. Frequency of eating processed foods was generally once (36.9%) or twice (32.4%) a day. Frequency according to processed food items was in the following order: confectionary (31.3%)> beverages (17.3%)> breads (12.3%)> instant noodles (11.7%) and milk or dairy products (11.7%)> frozen desserts (10.6%). The places for purchasing were a big mart (30.7%), convenience store (28.5%), and school cafeteria (26.8%). The reasons for purchasing were 'tasty' at 43.6% and 'hungry' at 35.2%. Main factors affecting purchasing were 'taste' at 70.9%, followed by price (16.2%)> quantity (5.6%)> nutrition (4.5%). The most important parts of food and nutrition labels were 'shelf-life' (67.0%) and 'calories' (57.5%). Degrees of confirmation of food and nutrition labeling were 'always' (12.3%), 'rarely' (28.5%), and 'sometimes' (59.2%). The reasons for not reading labels were 'unconcerned' (27.9%), 'too tiny lettering' (28.5%), 'hard to understand' (16.2%), and 'habitually' (15.1%). These results reflect low attention of high school students towards healthy food choices using food and nutrition labeling during purchasing. In conclusion, a specific education program for providing accurate product information as well as leading healthy purchasing behaviors should be required.

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.2
• /
• pp.179-188
• /
• 2000

Background : The decision to institute mechanical ventilation for patients with COPD is very difficult. The accurate information regarding weaning success and long-term survival will improve communication with patients and family and enhance informed consent. The aims of this study are to describe outcomes and identify variables associated with survival for patients experiencing mechanical ventilation with an acute respiratory failure of COPD. Methods : The 53 cases of mechanical ventilation in the intensive care unit in the National Medical Center from 1989 to 1998 were included. Data were collected retrospectively from medical records. Weaning success rate and 3 month and 1 year survival rates were estimated. Factors associated with weaning success and survival were determined. Results : Weaning sucess was 55%. For success group with 29 cases, 3 months survival rate was 61% and 1 year survival rate 37%. APACHE II scores in weaning success group were significantly lower than those in the failure group. Factors such as age, sex, comorbid-illnes. previous steroid use, causes of respiratory failure, RVH or arrhythmia on EKG, serum albumin level, arterial blood pH, $PaO_2$, $PaCO_2$, $FEV_1$ duration of mechanical ventilation and steroid use during mechanical ventilation were not associated with weaning success. Only age and serum albumin level were associated with 3 month and 1 year survival. No COPD patients of age more than 75 years and serum albumin level less than 3g/dl had survived at 1 year after weaning success. Conclusion : While weaning success from mechanical ventilation can be predicted by APACHE II score in COPD patients, long-term outcomes of survivors may be influenced by nutritional status and age.

• Journal of dental hygiene science
• /
• v.10 no.4
• /
• pp.219-225
• /
• 2010

The purpose of this study was to examine the patients' knowledge and expectation of dental implants and to provide effective consulting and accurate information on implants to them. To that end, between March 23, 2008 and June 5, 2008, patients who were visiting dental clinics (hospitals) in Seoul, Gyeonggi-do, and Incheon areas were surveyed. 84.7% of subjects said that they recognized implants, and the largest number of them (26.7%) of subjects came to know via friends. According to an analysis of subjects' knowledge of the dental implant operation, the maximum value was 4.06, and the minimum value was 3.05. The opinion value on the need to have regular examination after the implant operation was highest at 4.06. Regarding expectation over the implant operation, the maximum value was 4.42, and the minimum value was 1.78. The opinion value on considering the implant operation capability the most important was the highest at 4.42. The relationship between the knowledge of and expectation over implants was significant. By gender, females had a significantly higher level of knowledge than males. Regarding preference, females scored 3.27 points, and males scored 3.23 points. By occupation, professionals earned the highest score of 3.55 in knowledge, and professionals earned the highest score of 3.31 in expectation. According to an analysis of the relation between variables of knowledge of and variables of expectation over implants, the correlation coefficient (r) between the two factors was 0.362, indicating a positive relevancy(+)(p<.01).