• Journal of Korean Physical Therapy Science
• /
• v.27 no.2
• /
• pp.25-35
• /
• 2020

Background: There are many situations where walking in an actual community needs to change direction along with walking on a straight path, and this situation needs to be reflected in assessing walking ability of the community. Therefore, in this study, we tried to determine whether the assessments can distinguish the level of walking in the community. Design: Retrospective cohort study. Methods: Fifty-two survivors with chronic stroke have participated in the study. According to the evaluation result of 10mWT, the subjects of 0.8m/s and above were classified as the group who could walk in the community (n=22), and the subjects of 0.4m/s~0.8m/s were classified into the group who could not walk in the community (n=30). Modified Rivermead Mobility Index, Postural Assessment Scale for Stroke, Fugl-Meyer Assessment, Berg Balance Scale, 10-meter Walk Test (10mWT) were used to evaluate the motor skills. Furthermore, Activities-specific Balance Confidence Scale was used to evaluate psychological factors, and Timed Up & Go Test (TUG), Figure-of-Eight Walk Test (F8WT), Four Square Step Test (FSST), Step Test (ST) were applied to evaluate dynamic balance and mobility. Results: As a result for distinguishing walking levels in the community, TUG was 14.25 seconds, F8WT was 13.34 seconds, FST was 19.43 seconds, and ST of affected side and non-affected side were 6.5 points and 7.5 points, respectively. TUG (AUC=0.923), F8WT (AUC=0.905), and FST (AUC=0.941) were highly accurate, but the ST of affected side and non-affected side (AUC=0.806, 0.705) showed the accuracy of the median degree, respectively. Conclusion: To distinguish walking levels in the community of survivors with chronic stroke, TUG and FSST have been found to be the best assessment tool, and in particular, FSST could be very valuable in clinical use as the most important assessment tool to distinguish walking levels in the community.

• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.141-153
• /
• 2010

The study is about the development of operating speed prediction models aimed for an evaluation of design consistency of four lane rural roads. The main differences of this study relative to previous research are the method of data collection and classification of road alignments. The previous studies collected speed data at several points in the horizontal curve and approaching tangent. This method of collection is based on the assumption that acceleration and deceleration only occurs at horizontal tangents and the speed is kept constant at horizontal curves. However, this assumption leads to an unreliable speed estimation, so drivers' behavior is not well represented. Contrary to the previous approach, speed data were collected with one and data analysis using a speed profile is made for data selection before building final models. A total of six speed prediction models were made according to the combination of horizontal and vertical alignments. The study predicts that the speed data analysis and selection for model building employed in this study can improve the prediction accuracy of models and be useful to analyze drivers' speed behavior in a more detailed way. Furthermore, it is expected that the operating speed prediction models can help complement the current design-speed-based guidelines, so more benefits to drivers as real road users, rather than engineers or decision makers, can be achieved.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.3
• /
• pp.12-36
• /
• 2023

Graph databases, which store different types of data and their relationships modeled as a graph, can be effective in managing and analyzing real estate spatial data linked by complex relationships. However, they are not widely used due to the limited spatial functionalities of graph databases. In this study, we propose a uniform grid-based real estate spatial data management approach using a graph database to respond to various real estate-related spatial questions. By analyzing the real estate community to identify relevant data and utilizing national point numbers as unit grids, we construct a graph schema that linking diverse real estate data, and create a test database. After building a test database, we tested basic topological relationships and spatial functions using the Jackpine benchmark, and further conducted query tests based on various scenarios to verify the appropriateness of the proposed method. The results show that the proposed method successfully executed 25 out of 29 spatial topological relationships and spatial functions, and achieved about 97% accuracy for the 25 functions and 15 scenarios. The significance of this study lies in proposing an efficient data integration method that can respond to real estate-related spatial questions, considering the limited spatial operation capabilities of graph databases. However, there are limitations such as the creation of incorrect spatial topological relationships due to the use of grid-based indexes and inefficiency of queries due to list comparisons, which need to be improved in follow-up studies.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.299-306
• /
• 2023

In this study, the O/W emulsification processes with the natural surfactants that were extracted from Medicago sativa L. and Sapindus saponaria L. as emulsifiers were optimized using the central composite design-response surface methodology (CCD-RSM). Herein, independent parameters were the amounts of mixed emulsifiers, the mixing ratio of natural emulsifiers (soapberry saponin/alfalfa saponin), and the emulsification time, whereas the reaction parameters were the emulsion stability index (ESI), mean droplet size (MDS), and antioxidant activity (DPPH radical scanvenging activity). Through basic experiments, the ranges of operation variables for the amount of mixed emulsifiers, the mixing ratio of natural emulsifiers, and the emulsification time were 12~14 wt%, 30~70%, and 20~30 min, respectively. The optimum operation variables deduced from CCD-RSM for the amount of mixed emulsifiers, the mixing ratio of natural emulsifiers, and the emulsification time were 13.2 wt%, 44.2%, and 25.8 min, respectively. Under these optimal conditions, the expected values of the ESI, MDS, and antioxidant activity were 88.7%, 815.5 nm, and 38.7%, respectively. And, the measured values of the ESI, MDS, and antioxidant activity were 90.6%, 830.2 nm, and 39.6%, respectively, and the average experimental error for validating the accuracy was about 2.1%. Therefore, it was possible to design an optimization process for evaluating the O/W emulsion process using CCD-RSM.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.3
• /
• pp.375-383
• /
• 2023

Objectives: Coal-fired power plants feature diverse working conditions, including multi-layered employment structures and irregular work cycles due to outsourcing and non-standardized tasks. The current uniform occupational environment measurement systems have limitations in accurately assessing and evaluating these varied conditions. This study aims to propose alternative measurement and assessment strategies to supplement existing methods. Methods: Major domestic coal-fired power plants were selected as the study targets. To prepare for the study and establish strategies, work processes were identified and existing occupational environment measurement results were compared and analyzed. The study proceeded by employing three strategies: specific exposure groups (SEGs) measurement, continuous monitoring, and supplementary measurements, which were then compared and discussed. Results: Previous exposure index evaluations (5,268 cases) indicated that crystalline silica, a type of respirable particulate matter, had detection limits below the threshold (non-detectable) in 82.6% (4,349 cases) of instances. Exposures below 10% of the exposure limit were observed at a very low concentration of 96.1%. Similar exposure group measurements yielded results where detection limits were below the threshold in 38.2% of cases, and exposures below 10% of the limit were observed in 70.6%. Continuous monitoring indicated detection limits below the threshold in 12.6% of cases, and exposures below 10% of the limit were observed in 75.6%. Instances requiring active workplace management accounted for more than 30% of cases, with SEGs at 11.8% (four cases), showing a higher proportion compared to 3.0% (four cases) in continuous monitoring. For coal dust, exposures below 10% of the limit were highest in legal measurements at 90.2% (113 cases), followed by 74.0% (91 cases) in continuous monitoring, and 47.0% (16 cases) in SEGs. Instances exceeding 30% were most prevalent in SEGs at 14.7% (five cases), followed by legal measurements at 5.0% (eight cases), and continuous monitoring at 2.4% (three cases). When examining exposure levels through arithmetic means, crystalline silica was found to be 104.7% higher in SEGs at 0.0088 mg/m³ compared to 0.0043 mg/m³ in continuous monitoring. Coal dust measurements were highest in SEGs at 0.1247 mg/m³, followed by 0.1224 mg/m³ in legal measurements, and 0.0935 mg/m³ in continuous monitoring. Conclusions: Strategies involving SEGs measurement and continuous monitoring can enhance measurement reliability in environments with irregular work processes and frequent fluctuations in working conditions, as observed in coal-fired power plants. These strategies reduce the likelihood of omitting or underestimating processes and enhance measurement accuracy. In particular, a significant reduction in detection limits below the threshold for crystalline silica was observed. Supplementary measurements can identify worker exposure characteristics, uncover potential risks in blind spots of management, and provide a complementary method for legal measurements.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.437-444
• /
• 2001

This paper discusses applications of neural network to forest stand field data processing and determining suitable tree species for site-specific stand characteristics. For site-specific species selection, considered were 5 major coniferous species : P. densiflora for. erecta, L. leptolepis, P. koraiensis, P. densiflora, P. thunbergii. Among 1,320 sample plot data sets, 200 data sets with the highest site index (40 data sets for each species) were chosen as the test sets for investigation. Each data set includes 13 factors describing the site characteristics of the corresponding sample plot. The results of this investigation indicate high performance of neural network in data processing procedures for extracting data sets or measurement parameters without any recognizable pattern. These data sets or measurement parameters are those which have rare effect on site-specific species suitability or disturb pattern classification procedures of neural network because of unrecognizable patterns involved. Also the results have shown high potential of neural network in determining the best-suitable tree species for site characteristics. The % accuracy of the neural network model in determining the best-suitable tree species for site characteristics ranges from 77.6% to 91.8% associated with the combination of Site factors.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.2
• /
• pp.229-236
• /
• 2017

This study was performed to optimize yanggaeng processing conditions prepared with different amounts of steamed Liriopis tuber (SLT) extract, sugar, and agar powder using response surface methodology. The experimental conditions were designed according to the central composite design with 16 experimental points, including two replicates for three independent variables. The experimental data on physicochemical properties, textural properties, and sensory evaluation were fitted to various models, and the accuracy of the equations was analyzed by ANOVA. Among the responses, pH, water content, sugar content, L-value, browning index, chewiness, gumminess, and sensory properties of appearance, color, sweetness, hardness, texture, and overall acceptability showed significant correlation with contents of SLT, sugar, and agar powder. From these results, optimum formulation of yanggaeng was calculated as follows: SLT 35 mL, sugar 55.23 g, and agar powder 3.39 g.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.7
• /
• pp.846-851
• /
• 2005

In this paper, we propose Genetic Algorithms(GAs)-based Optimized Polynomial Neural Networks(PNN). The proposed algorithm is based on Group Method of Data Handling(GMDH) method and its structure is similar to feedforward Neural Networks. But the structure of PNN is not fixed like in conventional neural networks and can be generated in a dynamic manner. As each node of PNN structure, we use several types of high-order polynomial such as linear, quadratic and modified quadratic, and it is connected as various kinds of multi-variable inputs. The conventional PNN depends on the experience of a designer that select the number of input variables, input variable and polynomial type. Therefore it is very difficult to organize optimized network. The proposed algorithm leads to identify and select the number of input variables, input variable and polynomial type by using Genetic Algorithms(GAs). The aggregate performance index with weighting factor is proposed as well. The study is illustrated with tile NOx omission process data of gas turbine power plant for application to nonlinear process. In the sequel the proposed model shows not only superb predictability but also high accuracy in comparison to the existing intelligent models.

• Spatial Information Research
• /
• v.14 no.1 s.36
• /
• pp.129-150
• /
• 2006

Mineral potential mapping is an important procedure in mineral resource assessment. The purpose of this study is to analyze mineral potential using weight of evidence model and a Geographic Information System (GIS) environment to identify areas that have not been subjected to the same degree of exploration. For this, a variety of spatial geological data were compiled, evaluated and integrated to produce a map of potential mineral in the Gangreung area, Korea. for this, a spatial database considering mineral deposit, topographic, geologic, geophysical and geochemical data was constructed for the study area using a GIS. The used mineral deposits were non-metallic(Kaolin, Porcelainstone, Silicastone, Mica, Nephrite, Limestone and Pyrophyllite) deposits of sedimentary type. The factors relating to mineral deposits were the geological data such as lithology and fault structure, geochemical data, including the abundance of Al, As, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Si, Sr, V, Zn, $Cl^-,\;F^-,\;{PO_4}^{3-},\;{NO_2}^-,\;{NO_3}^-,\;SO_{42-}$, Eh, PH and conductivity and geophysical data, including the Bouguer and magnetic anomalies. These factors were used with weight of evidence model to analyze mineral potential. Probability models using the weight of evidence were applied to extract the relationship between mineral deposits and related factors, and the ratio were calculated. Then the potential indices were calculated by summation of the likelihood ratio and mineral potential maps were constructed from Geographic Information System (GIS). The mineral potential maps were then verified by comparison with the known mineral deposit areas. The result showed the 85.66% in prediction accuracy.

• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.610-621
• /
• 2021

The soil creep, primarily caused by earthquakes and torrential rainfall events, has widely occurred across the country. The Korea Forest Service attempted to quantify the soil creep susceptible areas using a discriminant value table to prevent or mitigate casualties and/or property damages in advance. With the advent of advanced computer technologies, machine learning-based classification models have been employed for managing mountainous disasters, such as landslides and debris flows. This study aims to quantify the soil creep susceptibility using several classifiers, namely the k-Nearest Neighbor (k-NN), Naive Bayes (NB), Random Forest (RF), and Support Vector Machine (SVM) models. To develop the classification models, we downscaled 292 data from 4,618 field survey data. About 70% of the selected data were used for training, with the remaining 30% used for model testing. The developed models have the classification accuracy of 0.727 for k-NN, 0.750 for NB, 0.807 for RF, and 0.750 for SVM against test datasets representing 30% of the total data. Furthermore, we estimated Cohen's Kappa index as 0.534, 0.580, 0.673, and 0.585, with AUC values of 0.872, 0.912, 0.943, and 0.834, respectively. The machine learning-based classifications for soil creep susceptibility were RF, NB, SVM, and k-NN in that order. Our findings indicate that the machine learning classifiers can provide valuable information in establishing and implementing natural disaster management plans in mountainous areas.