• 대한원격탐사학회지
• /
• 제40권1호
• /
• pp.93-101
• /
• 2024

Accurate field crop classification is essential for various agricultural applications, yet existing methods face challenges due to diverse crop types and complex field conditions. This study aimed to address these issues by combining support vector machine (SVM) models with multi-seasonal unmanned aerial vehicle (UAV) images, texture information extracted from Gray Level Co-occurrence Matrix (GLCM), and RGB spectral data. Twelve high-resolution UAV image captures spanned March-October 2021, while field surveys on three dates provided ground truth data. We focused on data from August (-A), September (-S), and October (-O) images and trained four support vector classifier (SVC) models (SVC-A, SVC-S, SVC-O, SVC-AS) using visual bands and eight GLCM features. Farm maps provided by the Ministry of Agriculture, Food and Rural Affairs proved efficient for open-field crop identification and served as a reference for accuracy comparison. Our analysis showcased the significant impact of hyperparameter tuning (C and gamma) on SVM model performance, requiring careful optimization for each scenario. Importantly, we identified models exhibiting distinct high-accuracy zones, with SVC-O trained on October data achieving the highest overall and individual crop classification accuracy. This success likely stems from its ability to capture distinct texture information from mature crops.Incorporating GLCM features proved highly effective for all models,significantly boosting classification accuracy.Among these features, homogeneity, entropy, and correlation consistently demonstrated the most impactful contribution. However, balancing accuracy with computational efficiency and feature selection remains crucial for practical application. Performance analysis revealed that SVC-O achieved exceptional results in overall and individual crop classification, while soybeans and rice were consistently classified well by all models. Challenges were encountered with cabbage due to its early growth stage and low field cover density. The study demonstrates the potential of utilizing farm maps and GLCM features in conjunction with SVM models for accurate field crop classification. Careful parameter tuning and model selection based on specific scenarios are key for optimizing performance in real-world applications.

• 한국산업정보학회논문지
• /
• 제17권7호
• /
• pp.43-50
• /
• 2012

본 논문에서는 차량용 센터필러 부품의 성형공정에서 발생하는 스프링백 문제를 해결하기 위한 일환으로 기존 부품의 금형보정이력 정보를 체계적으로 데이터베이스화하였다. 기존 부품의 경우 과도한 스프링백 발생에 의한 형상정밀도 불량을 해결하기 위하여 3차의 금형 보정을 현장기술자의 작업에 의하여 수행하였으나, 보정값이 정량화되어 있지 못한 문제가 있었다. 본 논문에서는 기존 금형 보정과정의 결과를 유한요소해석을 통하여 정량적으로 분석하고 보정이 의도대로 이루어졌는지를 평가하는 데이터베이스를 구축하였다. 구축된 데이터베이스 정보를 활용하여 유사부품의 금형설계에 활용하였으며, 결과적으로 보정횟수를 감소시키고도 제품을 성공적으로 성형할 수 있었다.

• 한국정밀공학회지
• /
• 제34권2호
• /
• pp.89-94
• /
• 2017

Micro-screws can be defined by their outer diameter of generally less than 1 mm. They are manufactured by head forging and thread rolling processes. In this study, the thread rolling process was numerically analyzed for a micro-screw with a diameter and pitch of 0.8 and 0.2 mm, respectively. Through finite element (FE) analysis, the effects of two design parameters (die gap and chamfer height) on the dimensional accuracy were investigated. Three combinations of chamfer heights were chosen first and the corresponding die gap candidates selected by geometric calculation. FE analyses were performed for each combination and their results indicated that the concave chamfer height should be less than 0.3 mm, while a 10 ?m difference in the die gap might cause degeneration in dimensional accuracy. These results conclude that ultra-high accuracy is required in die fabrication and assemblies to ensure dimensional accuracy in micro-screw manufacturing.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 춘계학술대회 논문집
• /
• pp.183-187
• /
• 1996

On the machine measuring system composed of touch trigger probes, a DNC module, a CMM module, an analysis module and a man-machine interface unit was developed. Measuring accuracy is affected by working accuracy of the on the machine measuring system. The working accuracy of the system is due to geometric errors of th machine tool, servo errors of feed drives and positioning errors of probes. In order to compensate for the measuring errors due to the working accuracy, a calibration module was developed. The measuring automation system was realized with the on the machine measuring system and an IBM-PC on the machine center through a RS-232C. It turns the machining machine (CMM). The system is used for dimensional checking of machined components. initial job setup, part identification, identification of machining errors due to deflection and wear of tools. cutter run out, and calibration of machine tools. A horizontal machining center equipped with FANUC OMC wre used for verification of the system. The validity and reliability of the system. The validity and reliability of the system were confirmed through a series of experiments with gage blocks, ring gages, comparison measurement with a commercial CMM, and so on.

• 한국정밀공학회지
• /
• 제28권3호
• /
• pp.275-284
• /
• 2011

The accuracy simulation technology of linear motion system is introduced in this paper. Motion errors and positioning errors are simulated using informations on the design parameters of elements of linear motion system. 5 Degree-of-freedom motion error analysis algorithm utilizing the transfer function method and positioning error analysis algorithm which are main frame of accuracy simulation are introduced. Simulated motion errors are compared with experimental results for verifying the effectiveness. Then, using the proposed algorithms, simulation is performed to investigate the effects of ballscrew and linear motor on the motion errors. Finally, the influence of feedback sensor position on the positioning error is also discussed.

• 한국산업융합학회 논문집
• /
• 제22권2호
• /
• pp.183-189
• /
• 2019

Researches utilizing the fourth industrial revolution technology are being conducted as a breakthrough for improving the earthworker productivity. In order to make the earthwork site smarter, it is necessary to digitize the construction site topography at first. For this purpose, photogrammetry using drones and LiDAR on MMS have been recently used. The purpose of this study is to analyze the accuracy of LiDAR by installation angles for verifying the application of MMS in the construction site. As a result of comparing the coordinates measured by the total station and the LiDAR, a small error of about 1-2 centimeters was shown. It is confirmed that MMS could be well applied to the earthwork site. In addition, there was no significant difference in the accuracy of the acquired coordinates according to the installation angle of the LiDAR, but the shape of the point clouds was different. The larger the installation angle, the better the shape of the site terrain is measured.

• 사상체질의학회지
• /
• 제31권3호
• /
• pp.48-65
• /
• 2019

Background Several attempts have been made to accurately diagnose the Sasnag Constitution. One of these attempts is to use a questionnaire. Questionnaire for the Sasang Constitution Classification(QSCC) has been revised several times and now used as QSCC II+. This study was designed to improve the accuracy of the revised Questionnaire for the Sasang Constitution Classification(QSCC II+). Method 1,054 people were gathered for this study and analyzed to check discrimination ability of current discriminant function of QSCC II+. They were outpatients who visited the hospital and the constitution was confirmed by the specialist of Sasang Constitutional Medicine. Results Accuracy of QSCC II+ at Soeumin was improved from 74.9% to 79.3%, and there were no significant difference at Soyangin and Taeumin. Conclusion New discriminant function was constructed through discriminant analysis. And the accuracy of QSCC II+ was generally improved, especially in Soeumin.

• International Journal of Internet, Broadcasting and Communication
• /
• 제11권2호
• /
• pp.1-10
• /
• 2019

Research classification of software modules was done to validate the approaches proposed for addressing limitations in existing classification approaches. The objective of this study was to replicate the experiments of a recently published research study and re-evaluate its results. The reason to repeat the experiment(s) and re-evaluate the results was to verify the approach to identify the faulty and non-faulty modules applied in the original study for the prioritization of test cases. As a methodology, we conducted this study to re-evaluate the results of the study. The results showed that binary logistic regression analysis remains helpful for researchers for predictions, as it provides an overall prediction of accuracy in percentage. Our study shows a prediction accuracy of 92.9% for the PureMVC Java open source program, while the original study showed an 82% prediction accuracy for the same Java program classes. It is believed by the authors that future research can refine the criteria used to classify classes of web systems written in various programming languages based on the results of this study.

• Structural Engineering and Mechanics
• /
• 제82권2호
• /
• pp.245-258
• /
• 2022

Many Structural Health Monitoring (SHM) methods have been proposed for structural damage diagnosis and prognosis. However, SHM for pinched hysteretic structures can be problematic due to the high level of nonlinearity. The model-free hysteresis loop analysis (HLA) has displayed notable robustness and accuracy in identifying damage for full-scaled and scaled test buildings. In this paper, the performance of HLA is compared with seven other SHM methods in identifying lateral elastic stiffness for a six-story numerical building with highly nonlinear pinching behavior. Two successive earthquakes are employed to compare the accuracy and consistency of methods within and between events. Robustness is assessed across sampling rates 50-1000 Hz in noise-free condition and then assessed with 10% root mean square (RMS) noise added to responses at 250 Hz sampling rate. Results confirm HLA is the most robust method to sampling rate and noise. HLA preserves high accuracy even when the sampling rate drops to 50 Hz, where the performance of other methods deteriorates considerably. In noisy conditions, the maximum absolute estimation error is less than 4% for HLA. The overall results show HLA has high robustness and accuracy for an extremely nonlinear, but realistic case compared to a range of leading and recent model-based and model-free methods.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권2호
• /
• pp.167-176
• /
• 2023

This study presents the performance analysis of real-time orbit determination and prediction for navigation message generation of Regional Navigation Satellite System (RNSS). Since the accuracy of ephemeris and clock correction in navigation message affects the positioning accuracy of the user, it is essential to construct a ground segment that can generate this information precisely when designing a new navigation satellite system. Based on a real-time architecture by an extended Kalman filter, we simulated orbit determination and prediction of RNSS satellites in order to assess the accuracy of orbit and clock prediction and signal-in-space ranging errors (SISRE). As a result of the simulation, the orbit and clock accuracy was at 0.5 m and 2 m levels for 24 hour determination and six hour prediction after the determination, respectively. From the prediction result, we verified that the SISRE of RNSS for six hour prediction was at a 1 m level.