• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.34-38
• /
• 2003

In metal working, cold forging that has profit to satisfy dimension accuracy is using in various manufacturing products. Recently, most of the interest thing is precision forging of gear. Gear forging product is more strength than broaching gear, and it has many advantages with reduction of factory expenses. The reason of difficulty to improve accuracy of gear dimension compare to another products is the dimension accuracy is very high, approximately 10$\mu\textrm{m}$, and because die of involute teeth and elastic strain of forged tool differ from standard curve. This paper represent quantitative analysis of die and teeth of forged tool, namely difference of curves, with experiments and analyze the factor of dimension gap, finally, will design compensated involute curve.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.27-34
• /
• 2003

Capacity Spectrum Method (CSM) defined in ATC-40 or FEMA-273 is a most widely used static inelastic analysis method to evaluate the performance level of the existing structures. In CSM, however, uncertainties and errors exist when lateral forces such as earthquake and wind loads are analyzed into equivalent static loads. This paper examines the accuracy of CSM for different structural parameters, such as natural frequency, yield strength and hardening ratio, and various soil conditions by comparing the estimated values to exact solutions obtained by time history analysis. Results indicate that the accuracy of CSM, in general, is influenced mostly by hardening ratio.

• 소성∙가공
• /
• 제8권3호
• /
• pp.284-293
• /
• 1999

The rigid-plastic finite element analysis requires a large amount of computation time due to its non-linearity. For economic computation, mismatching refinement, and efficient domain decomposition method with different mesh density for each sub domain, is developed. A modified velocity alternating scheme for the interface treatment is proposed in order to obtain good convergence and accuracy. As a numerical example, the axisymmetric extrusion process is analyzed. The results are discussed for the various velocity update schemes form the viewpoint of convergence and accuracy. The three-dimen-sional extrusion process with rectangular section is analyzed in order to verify the effectiveness of the proposed method. Comparing the results with those of the conventional method of full region analysis, the accuracy and the computational efficiency of the proposed method are then discussed.

• 환경영향평가
• /
• 제18권1호
• /
• pp.31-39
• /
• 2009

A lot of data which are used in environment analysis of air pollution have characteristics that are distributed continuously in space. In this point, the collected data value such as precipitation, temperature, altitude, pollution density, PM10 have spatial aspect. When geostatistical data analysis are needed, acquisition of the value in every point is the best way, however, it is impossible because of the costs and time. Therefore, it is necessary to estimate the unknown values at unsampled locations based on observations. In this study, spatial interpolation method such as local trend surface model, IDW(inverse distance weighted), RBF(radial basis function), Kriging were applied to PM10 annual average concentration of Seoul in 2005 and the accuracy was evaluated. For evaluation of interpolation accuracy, range of estimated value, RMSE, average error were analyzed with observation data. The Kriging and RBF methods had the higher accuracy than others.

• 한국측량학회지
• /
• 제7권1호
• /
• pp.59-65
• /
• 1989

본 연구에서는 대상물의 좌표결정을 위해 해석적사진측량에서 사용되고 있는 번들조정법을 이용하여, 지상시설물의 경사에 마른 지상기준점의 배치형태와 수렴촬영시 수렴각의 변화에 따른 3차원 좌표의 오차특성들을 분석하여, 최적기준점배치 및 수렴각을 제시하였다. 따라서 일반지상시설물의 제약적인 주변환경으로 인해 수렴수평촬영을 할 수 없는 경우 편각수렴촬영방법에 의해 지상시설물의 경사면 해석에 있어서의 정확도를 크게 향상시킬 수 있었다.

• Applied Microscopy
• /
• 제36권spc1호
• /
• pp.47-56
• /
• 2006

Improvements are made to existing primitive cell volume measurement method to provide a real-time analysis capability for the phase analysis of nanocrystalline materials. Simplification is introduced in the primitive cell volume calculation leading to fast and reliable method for nano-phase identification and is applied to the phase analysis of Mo-Si-N nanocoating layer. In addition, comparison is made between real-time and film measurements for their accuracy of calculated primitive cell volume values and factors governing the accuracy of the method are determined. About 5% accuracy in primitive cell determination is obtained from camera length calibration and this technique is used to investigate the cell volume variation in WC-TiC core-shell microstructure. In addition to chemical compositional variation in core-shell type structure, primitive cell volume variation reveals additional information on lattice coherency strain across the interface.

• 터널과지하공간
• /
• 제24권5호
• /
• pp.386-394
• /
• 2014

발파를 이용한 채광작업에 있어서 천공의 정확성은 발파의 효율성을 결정할 수 있는 중요한 요소 중의 하나이며, 따라서 천공오차의 발생 원인에 대한 분석과 천공오차의 발생 정도를 줄일 수 있는 대책 마련은 발파의 효율성 및 안전성 확보에서 매우 중요하다. 본 연구에서는 천공오차의 발생 원인을 제어가능 요인과 제어불가능 요인으로 나누어 분석하였으며 현장조사와 AHP 분석을 통하여 천공오차를 유발하는 요인들의 영향성을 살펴보았다. 또한 이들 간의 가중치 분석을 통해 천공오차를 낮출 수 있는 효과적인 대책을 제시하였다.

• 대한토목학회논문집
• /
• 제11권4호
• /
• pp.121-131
• /
• 1991

본 연구는 비측량용 사진기를 이용한 사고현장 적용해석에 관한 연구로서 사건 사고 현황을 간편하고 경제적이며, 신속 정확하게 처리할 수 있는 방법을 제시하기 위해 실내 모형관측을 통하여 정확도를 분석하였다. 비측량용 사진에 3차원 좌표대와 부가매개변수를 고려한 번들조정법을 적용하므로서 기존의 기준점측량 성과와 측량용 사진기에 의한 위치해석 결과값에 준하는 정확도를 얻을 수 있었다. 또한, 절대좌표 정확도에 있어서 비측량용 사진기의 필름크기가 크고 초점거리가 길수록 측량용 사진기의 정확도에 근접함을 알 수 있었다.

• 한국항행학회논문지
• /
• 제13권2호
• /
• pp.178-186
• /
• 2009

SBAS(Satellite Based Augmentation System) 시스템에서는 GNSS 사용자들의 위치 정확도 향상을 위해 위성궤도 및 시계보정정보를 제공하고 있는데, 본 논문에서는 이러한 보정정보의 정확도에 대해 분석하였다. IGS(International GNSS Service)에서 제공하는 GPS 위성의 정밀궤도력을 참값으로 가정하고, 그에 대한 오차를 이용하여 정확도를 분석/수행하였다. 이때 IGS 정밀궤도력과의 정확한 비교를 위해 GPS 위성에 대한 안테나 위상중심 편차와 P1-C1 편이를 고려하였다. SBAS 위성궤도 및 시계보정 정보로는 미국의 WAAS와 일본의 MSAS 보정정보를 이용하였다. 정확도 분석을 통해 SBAS에서 제공하는 위성궤도 보정정보와 위성시계 보정정보가 상당한 상관관계를 가지고 있음을 확인하였다. 또한 보정정보의 정확도는 SBAS 시스템의 지상 네트워크 크기와 위성의 궤적에 영향을 받는 것을 확인하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권12호
• /
• pp.6152-6168
• /
• 2017

Recently, the biometric-based authentication systems such as FIDO (Fast Identity Online) are increased in mobile computing environments. The biometric-based authentication systems are performed on the mobile devices with the battery, the improving energy efficiency is important issue. In the case, the size of images (i.e., face, fingerprint, iris, and etc.) affects both recognition accuracy and energy consumption, and hence the tradeoff analysis between the both recognition accuracy and energy consumption is necessary. In this paper, we propose an energy-efficient way to authenticate based on biometric information with tradeoff analysis between the both recognition accuracy and energy consumption in multimedia IoT (Internet of Things) transmission environments. We select the facial information among biometric information, and especially consider the multicore-based mobile devices. Based on our experimental results, we prove that the proposed approach can enhance the energy efficiency of GABOR+LBP+GRAY VALUE, GABOR+LBP, GABOR, and LBP by factors of 6.8, 3.6, 3.6, and 2.4 over the baseline, respectively, while satisfying user's face recognition accuracy.