터널과지하공간 (Tunnel and Underground Space)

  • 제24권5호
  • /
  • Pages.386-394
  • /
  • 2014
  • /
  • 1225-1275(pISSN)
  • /
  • 2287-1748(eISSN)
한국암반공학회 (Korean Society for Rock Mechanics and Rock Engineering)
권호 표지
DOI QR코드

DOI QR Code

발파공의 천공오차와 발파정확도의 상관성에 관한 현장조사 및 계층분석기법 연구

Analytic Hierarchy Process Analysis on Correlation Between Drilling Error and Blasting Accuracy

  • 이덕환 (강원대학교 에너지.자원공학과) ;
  • 최성웅 (강원대학교 에너지.자원공학과) ;
  • 김창오 (대성엠디아이(주) 기획팀)
  • 투고 : 2014.10.15
  • 심사 : 2014.10.23
  • 발행 : 2014.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

발파를 이용한 채광작업에 있어서 천공의 정확성은 발파의 효율성을 결정할 수 있는 중요한 요소 중의 하나이며, 따라서 천공오차의 발생 원인에 대한 분석과 천공오차의 발생 정도를 줄일 수 있는 대책 마련은 발파의 효율성 및 안전성 확보에서 매우 중요하다. 본 연구에서는 천공오차의 발생 원인을 제어가능 요인과 제어불가능 요인으로 나누어 분석하였으며 현장조사와 AHP 분석을 통하여 천공오차를 유발하는 요인들의 영향성을 살펴보았다. 또한 이들 간의 가중치 분석을 통해 천공오차를 낮출 수 있는 효과적인 대책을 제시하였다.

Drilling accuracy is known to be one of the most important factors determining blasting efficiency in mining by blast operation. Therefore analysing the causes of drilling error and preparing a countermeasure for minimizing drilling error are very important for blasting efficiency and safety. In this study, causes of drilling error are analyzed with dividing them into controllable factors and uncontrollable factors, and relationship between each cause is also comprehended through field measurement and AHP analysis. Finally, effective measures to help lower the drilling error are proposed with the results from weighting analysis for each factor.

키워드

참고문헌

  1. Aczel, J. and Saaty, T.L., 1983, Procedures for synthesizing ratio judgements, Journal of Mathematical Psychology, Vol. 27, 93-102. https://doi.org/10.1016/0022-2496(83)90028-7
  2. Anders, O., 2013, High precision drilling, Tunnelling in Rock by Drilling and Blasting, Taylor & Francis Group, London, 1-6.
  3. Atlas Copco, 2008, Surface Drilling, 2nd edition, Publisher Ulf Linder, A technical reference edition of Atlas Copco, Sweden.
  4. Atlas Copco, 2013, Blasthole drilling, 3rd edition, Publisher Ulf Linder, A technical reference edition of Atlas Copco, Sweden.
  5. Bhandari, S., 1997, Engineering Rock Blasting Operations. A.A. Balkema, Rotterdam, 215p.
  6. Brown, E.T., Green, S.J., and Sinha, K.P., 1981, The influence of rock anisotropy on hole deviation in rotary drilling, Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., Vol. 18, 387-401. https://doi.org/10.1016/0148-9062(81)90003-6
  7. Dyer, R.F. and Forman, E.H., 1992, Group decision support with the analytic hierarchy process, Decision Support System, Vol. 8, 99-124. https://doi.org/10.1016/0167-9236(92)90003-8
  8. ESSEEM, 2010, Drilling methods and commonly used machinery, ESSEEM Work Package, http://www.esseem.eu/work_packages.htm.
  9. Gustafsson, R., 1973. Swedish Blasting Technique, Published by SPI, Gothenburg, Sweden, 61-62.
  10. Kang, M.S., 2003, Rank reversal problem in the application of AHP to group decision making precess, J. of Business Research, Vol. 18.3, 153-170.
  11. Kim, Y.K., Kim, H.C., and Yoo, J.H., 2003, A study on the drilling methods to reduce overbreak in tunnel blasting, Explosives & Blasting, Vol. 21.2, 1-13.
  12. Korea Construction News, 2014.01.20., www.conslove.co.kr/news.
  13. Muhammad, A.R., 2009, The Effect of Fragmentation Specification on Blasting Cost, MS Thesis, Queen's University.
  14. Saaty, T.L., 1980, The Analytic Hierarchy Process, New York, McGraw-Hill.
  15. Sinkala, T., 1991, Improving hole quality by automatic control of the drilling process: theoretical and field studies, Min. Sci. and Tech., Vol. 12, 79-88. https://doi.org/10.1016/0167-9031(91)91561-U
  16. Song, C.H., Kwon, K.B., Shin, D.Y., Hwang, W.K., Lirn, J.H., and Cho, J.W., 2013, "Trend analysis of drilling technology for top-hammer drilling machine", Tunnel & Underground Space, Vol. 23.4, 271-279. https://doi.org/10.7474/TUS.2013.23.4.271