• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.527-534
• /
• 2011

This paper describes an analysis of topographical changes to the Eulsuk-Island at the Nakdong River Estuary using a long-term dataset of high resolution aerial images from 1983 to 2007. Ground control surveying was performed at some feature points using GPS(Global Positioning System) to accomplish AT(Aerial Triangulation) for past aerial images. Even if some still existing feature points appeared on old aerial images were used as GCPs(Ground Control Points) for past aerial images in AT, its accuracy reached at 1m level. Since then, a quantitative analysis of topographical changes was conducted on digital orthophotos produced by a series of aerial images taken by different years. The change volume of total area, construction, vegetation, buildings and roads could be extracted per each period in study area. The total area decreased from 1983 to 1992, but it has not almost changed since 1992. According to the continuous development, the area of vegetation has steadily decreased, while that of buildings and roads has generally increased. The result of this study can provide us with invaluable base data for further topographical change monitoring in Eulsuk-Island and Nakdong River estuary caused by continuous development in this area.

• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.285-292
• /
• 2013

This study performed a proprioception improvement training for recurrence prevention of industrial workers with chronic lateral epicondylitis and analysed their pain and proprioception. The subjects of the study were thirty chronic lateral epicondylitis patients working for K company and were divided into elbow exercise program Group made of 15 subjects and proprioception improvement training Group made of 15. As variables for pain, pressure pain, and grip strength were measured and for the propioception, joint position sense of each group was measured before and after the exercise program. To compare differences before and after the program, a paired t-test was used and to compare differences between both groups, an independent samples t-test was used. As a result of the test, it was discovered that pressure pain, grip strength and joint position sense of the both groups were improved statistically significantly. These were statistically differential effect between each group on pressure pain, grip strength and joint position sense. In conclusion, it is suggested that proprioception improvement training should be considered as a method chronic and recurrence prevention lateral epicondylitis of industrial workers.

• Journal of KIISE
• /
• v.43 no.4
• /
• pp.404-410
• /
• 2016

Automated road map generation poses significant research challenges since GPS-based navigation systems prevail in most general vehicles. This paper proposes an automated detecting method for intersection points using GPS vehicle trajectory data without any background digital map information. The proposed method exploits the fact that the trajectories are generally split into several branches at an intersection point. One problem in previous work on this intersection detecting is that those approaches require stopping points and direction changes for every testing vehicle. However our approach does not require such complex auxiliary information for intersection detecting. Our method is based on partial trajectory matching among trajectories since a set of incoming trajectories split other trajectory cluster branches at the intersection point. We tested our method on a real GPS data set with 1266 vehicles in Gangnam District, Seoul. Our experiment showed that the proposed method works well at some bigger intersection points in Gangnam. Our system scored 75% sensitivity and 78% specificity according to the test data. We believe that more GPS trajectory data would make our system more reliable and applicable in a practice.

• Journal of Digital Convergence
• /
• v.15 no.10
• /
• pp.31-43
• /
• 2017

This study was aimed at analyzing the operational efficiency of DPAs(the delivery and pickup agents), which serve as sub-terminals in parcel delivery services, using CCR/BCC models in DEA. The input variables included the number of employees, and the amount of equipment and the operating expenses. The output variable was revenue value. The efficiency for the period from 2014 to 2016 was analyzed. The results revealed that the operational efficiency improved in 2016, compared with 2014, in both CCR and BCC models. According to the benchmarking analysis, DMU 1 and DMU 7 showed higher efficiency in 2016. The inefficiency analysis based on the BCC model showed increased efficiency of all factors in 2016 when compared with 2014. The Malmquist productivity index (MPI) dropped slightly as a result of technical changes and indicated a declining technical efficiency in all DMUs. This study suggests the need for government-led systematic improvement and support for DPAs by providing current insight into the parcel delivery industry and analyzing DPAs' operational efficiency in Korea for the first time. This research performed efficiency analysis of DPAs located in new town of paju and gimpo cities. In future research, comparative study on efficiency analysis including new town, old town area, and other cities are needed.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.1
• /
• pp.91-97
• /
• 2011

The purpose of this study was to evaluate RPM maintenance in X-Smart according to the power supplied by the AC adapter and rechargeable battery. Five new X-Smart were used in this study. A handpiece with rubber disk which has reflective tape was mounted on the vice. To measure the RPM, a non-contact type digital tachometer was used. RPM measurements were recorded every 5 minutes to 180 minutes and repeated 3 times per motor from each power source. To evaluate a difference of the RPM changes, two-way repeated measures were performed using $SPSS^{TM}$ 14.0. All tests were conducted at the 95 percent confidence level. There was no significant difference in the RPM change between the power sources. Continuous use of X-Smart with a rechargeable battery for up to 180 minutes could be safely used as an endodontic wireless motor with a reliable RPM maintenance.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_3
• /
• pp.835-854
• /
• 2017

Government regulations and policies are important means of restraining the indiscreet expansion of urban areas. According to the standards from those means, it is clear that the fluctuation of forest green proportion encroached by the increase of urban space is obvious. In this study, we interpreted the changes of urban areas as well as the green ones owing to the urban expansion by the decades from 1996, with focusing on the cities of Seoul and Daegu highly developed in South Korea. The purpose of this study is to analyze the spatial expansion and morphological characteristics of urban land cover using not only satellite imageries (1996, 2006, 2016). but also the urban expansion intensity index (UEII) and GUIDOS program. Ultimately, this study is to compare the changes in the rate of forests due to urban expansions annually analyzed based on areas of forest elevation, slope, and the area of single forest patch. In Seoul, the expansion begun from urban space to suburban areas was comparatively rapid, which led the forest fragmentation and the gradual decline of the single patch. However, when it comes to DEM (Digital elevation model) and slope above a certain standard, by the development regulations, there was little decrease in area by anthropogenic developments. The city of Daegu has increased at a slow speed since 1996 in urban and suburban areas, whereas green forests have greatly increased through green forest conservation campaigns. In this way, as to the government policies and regulations, the quantitative and morphological expansion of cities owing to development could be controlled and forest spaces could be preserved as well. Therefore, regulations and policies by the government should be appropriately utilized for sustainable cities.

• Tunnel and Underground Space
• /
• v.23 no.5
• /
• pp.353-361
• /
• 2013

Previous studies for analyzing optimal haulage routes of dump trucks in open pit mines mostly used raster data. However, the raster data has several problems in performing optimal route analyses: (1) the jagged appearance of haulage roads according the cell resolution often causes overestimation of the travel cost; (2) it difficult to trace the topological relationships among haulage roads. These problems can be eliminated by using vector network data, however a new method is required to reflect the performance characteristics of a dump truck according to terrain gradient changes. This study presents a new method to create vector network data with the consideration of terrain gradient for analyzing optimal haulage routes of dump trucks in open pit mines. It consists of four procedures: (a) creating digital elevation models, (b) digitizing haulage road networks, (c) calculating the terrain gradient of haulage roads, and (d) calculating the average speed and travel time of a dump truck along haulage roads. A simple case study at the Roto South pit in the Pasir open pit coal mine, Indonesia is also presented to provide proof that the proposed method is easily compatible to ArcGIS Network Analyst software and is effective in finding optimal haulage routes of dump trucks with considering terrain gradient in open pit mines.

• Journal of the Korean Society of Radiology
• /
• v.10 no.5
• /
• pp.321-325
• /
• 2016

Dose creep is one of clinical errors that arises from the tester's inexperience or carelessness, and according to Task Group #116 of American Association of Physicists in Medicine, its continued occurrence is being reported in the digital method. At this point, the demand for an automatic exposure control device that minimizes the dose creep phenomenon and can improve reproducibility is increasing. In this study is to consider the automatic exposure control device sensor that can is not only easy to produce, but also reduce the dose creep phenomenon by conducting a research on high-efficient semiconductor sensor. As a result, the Intrinsic-type and PIN-type sensors have excellent optical property compared to Ref sensor, would have less shading effect, and have relatively low sensitivity, but would provide accurate feedback signals to automatic exposure control device with its consistent tendency according to exposure condition changes.

• Journal of Environmental Impact Assessment
• /
• v.24 no.2
• /
• pp.134-153
• /
• 2015

When making urban planning, it is important to understand climate effect caused by urban structural changes. Seoul city applies UPIS(Urban Plan Information System) which provides information on urban planning scenario. Technology for analyzing climate effect resulted from urban planning needs to developed by linking urban planning scenario provided by UPIS and climate analysis model, CAS(Climate Analysis Seoul). CAS develops for analyzing urban climate conditions to provide realistic information considering local air temperature and wind flows. Quantitative analyses conducted by CAS for the production, transportation, and stagnation of cold air, wind flow and thermal conditions by incorporating GIS analysis on land cover and elevation and meteorological analysis from MetPhoMod(Meteorology and atmospheric Photochemistry Meso-scale model). In order to reflect land cover and elevation of the latest information, CAS used to highly accurate raster data (1m) sourced from LiDAR survey and KOMPSAT-2(KOrea Multi-Purpose SATellite) satellite image(4m). For more realistic representation of land surface characteristic, DSM(Digital Surface Model) and DTM(Digital Terrain Model) data used as an input data for CFD(Computational Fluid Dynamics) model. Eight inflow directions considered to investigate the change of flow pattern, wind speed according to reconstruction and change of thermal environment by connecting green area formation. Also, MetPhoMod in CAS data used to consider realistic weather condition. The result show that wind corridors change due to reconstruction. As a whole surface temperature around target area decreases due to connecting green area formation. CFD model coupled with CAS is possible to evaluate the wind corridor and heat environment before/after reconstruction and connecting green area formation. In This study, analysis of climate impact before and after created the green area, which is part of 'Connecting green network across the north and south in Seoul' plan, one of the '2020 Seoul master plan'.

• Journal of Korea Game Society
• /
• v.2 no.2
• /
• pp.113-119
• /
• 2002

With development of internet technology, digital economy that advance rapidly formed much leagues of B2B, B2C, A2B etc, according to the application part. Also, electronic commerce system implementation technology is introduced by Component based on development method in object oriented technique base depending on customer's requirement, and development environment changes by 3- Tiers, Web-Based architecture etc. in existent C/S (Client/Server) environment and is introduced. Thus, In this research, I implemented seat reservation and confirmation system that can be used in electronic commerce in multi-server environment. This, for improve efficiency in distribute environment, relevant importance logic used server component model EJB, and implemented through JSP and Java that use Servlet of Resin Server environment for Main Server. Therefore, through independence component using EJB, I did so that can improved independence between electronic commerce system logic, and reduce server's overhead calling relevant method through discrete EJB server, and manage each logic resources efficiently.