• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.2
• /
• pp.202-209
• /
• 2014

In this paper, a developed device for detecting target's location and avoiding collision is proposed. Velocity and acceleration model of target are derived to estimate target's information, i.e. position, velocity and acceleration considering process and measurement noise. Kalman filtering method applied to the estimation process and its results was confirmed by simulation. The distance measurements system using laser sensor for moving target system is also developed to confirm the effectiveness of the proposed scheme. Experiments to get information of moving target with velocity and acceleration model was executed. The data with filtering and without filtering was compared by experiments. Discontinuous measured data was changed to smooth and continuous data by Kalman filtering. It is confirmed that desired data was obtained by applying proposed scheme. UI for measuring and monitoring the target data is developed and visual and auditory alarm function is attached on the system Finally, position estimation system of moving target with good performance is achieved by low price equipments.

• Journal of the Korean Society for Railway
• /
• v.16 no.4
• /
• pp.331-339
• /
• 2013

This study highlights the theme of human error emerging as a critical issue in the railroad industry, conducting exploratory research on the effects of health, cognition, and safety climates on safety behavior and accidents using an empirical method. The statistical results based on questionnaires received from 204 train drivers indicate that psychological fatigue, cognitive failure, and internal locus of control as individual variables and CEO philosophy and behavior of immediate boss as organizational variables have significant relationships with safety behavior, while cognitive failure, CEO philosophy, behavior of immediate boss, and education were found to be significant variables with respect to accidents. Furthermore, unsafe behavior such as mistakes and violations showed negative effects on near misses and responsibility accidents, respectively. Based on these results, effective alternatives and countermeasures needed to mitigate human error were posited.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.3
• /
• pp.168-174
• /
• 2010

South Korea's industrial injuries are decreasing overall in the last 32 years. Nevertheless, the fatal occupational injury rate is still higher than in developed countries. This study was conducted to help prevention strategies of occupational injuries for the Republic of Korea. Fatal occupational injury rates were obtained from "Industrial Accident Analysis"of the Korean Ministry of Labor. Poisson regression was used to assess time trends. Socioeconomic indicators were obtained from the Korea Labor Institute and the Statistics Korea. Fatal occupational injury rates were adjusted by year, and Pearson correlation analysis was used to assess the relationship between the socio-economic indicators and occupational injuries. In 1975, fatal occupational injury rate was 54.8 per 100,000 workers. With somewhat up and down, it was decreased to 21.0 in 2006. An annual rate of change for the years 1975-2006 was - 1.83%, and for the years 2002-2006 was -5.02%. As economic growth rate, paricipation rate for the age less than 25 and hours of work per week or year increased, fatal occupational injury rate also increased. Conversely, as GDP per capita, paricipation rate or employment rate for female, paricipation rate for the age 25 or more, hourly compensation costs for production workers and services output as percent of GDP increased, fatal occupational injury rate decreased. By the development of safety techniques and the adoption of more legislative constraints, developed economy reduce occupational injuries. Conversely, economic growth may raise occupational injuries. Therefore, prevention strategies are needed to manage both of them. We need to make an effort to prevent occupational injuries due to not only sexual differences, but also job differences between male and female. Preventive strategies are needed to consider the characteristics of younger workers. Addition to wage, other appropriate variables for work condition should be considered together. Extending work hours is need to be regulated with systemic methods.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.403-412
• /
• 2019

The characteristics of the manoeuvring motion of a ship are dependent on the ship type, as well as draft or speed in the same ship. In recent years, the number of extra-large vessels has increased significantly, which can cause enormous material and environmental damage in the event of a marine accident. Thus, the importance of ship maneuvering is increasing. The IMO has forced the officers to be trained in simulators through the STCW 95 amendment. However, FMSS is costly and difficult to access and the PC-based simulator has the disadvantage that only one person can engage in simulation. The purpose of this study was to solve the shortcomings of the FMSS and PC-based simulators by enabling multiple people to use their PCs to simulate based on a network. The simulator is implemented through the analysis and numerical calculation of the Nomoto model, Radar function mounting, data transfer protocol design, and GUI building. To verify the simulator, the simulation results were compared and analyzed with the test results of T.S. HANBADA according to the criteria of the Korean Register of Shipping(KR) and IMO standards for ship maneuverability. As a result, It showed a relative error of 0%~ 32.1% with an average of 13.7%, and it satisfied the IMO criteria for ship maneuverability.

• Journal of the Korean Society of Safety
• /
• v.22 no.3 s.81
• /
• pp.98-104
• /
• 2007

As the industrial society is highly developing, human need in daily life has also changed drastically. With the introduction of 40 hour working week system, more households enjoy picnics on weekends. More gas accidents take place on Saturdays and on Sundays than any other days of week. In this context, the Institute of Gas Technology Training in Korea Gas Safety Corporation carries out explosion experiment to make trainees to take all possible measure to ensure safe management of gas in the field by fully recognizing the hazards of gas explosion accidents. In this study, the influence of explosion over-pressure caused by the rupture of butane can thrown away after use was calculated by using the Hopkinson's Scaling Law and the accident damage was estimated by applying the influence on the adjacent people into the Probit model. The value of those away from 50 meters from the explosion site was 1.35kPa and the peak overpressure to thoes away from 25 meters directly was 3.2kPa. Those value was input to the PROBIT model, the estimation showed the sante result 0 percent of damage possibility.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.346-353
• /
• 2016

In the design conditions of some research reactors, the siphon phenomenon can cause continuous efflux of water during pipe rupture. A siphon breaker is a safety device that can prevent water efflux effectively. However, the analysis of the siphon breaking is complicated because many variables must be included in the calculation process. For this reason, a simulation program was developed with a user-friendly GUI to analyze the siphon breaking easily. The program was developed by MFC programming using Visual Studio 2012 in Windows 8. After saving the input parameters from a user, the program proceeds with three steps of calculation using fluid mechanics formulas. Bernoulli's equation is used to calculate the velocity, quantity, water level, undershooting, pressure, loss coefficient, and factors related to the two-phase flow. The Chisholm model is used to predict the results from a real-scale experiment. The simulation results are shown in a graph, through which a user can examine the total breaking situation. It is also possible to save all of the resulting data. The program allows a user to easily confirm the status of the siphon breaking and would be helpful in the design of siphon breakers.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.2
• /
• pp.435-447
• /
• 2016

As data can be permanently stored and freely distributed, in modern society, the Internet became a world that remembers everything forever. Because of that, there has been increasing the number of accident with never-forgetting data and, as a result, a movement has been emerged to apply a notion of 'oblivion' to internet world. The movement is called 'The right to be forgotten.' However, 'The right to be forgotten' in a higher level which internet users want to be guaranteed is very limited in the juridical approach because of the confliction with the other basic rights and problems. On the other hand, the requests of individuals to guarantee 'The right to be forgotten' has been urged digital extinction technology, such as volatile SNS, Digital Aging System, to be developed. With introduction of oblivion, digital extinction technology with setting expire date on digital information can present a new solution on assuring 'The right to be forgotten.' This research establishes the detail scope of, analyzes the level of assurance of, and, through digital extinction technology with the established scope, suggest the potential assurance of the 'The right to be forgotten'.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.2
• /
• pp.139-148
• /
• 2020

The most important factor affecting the berthing energy generated when a ship berths is the berthing velocity. Thus, an accident may occur if the berthing velocity is extremely high. Several ship features influence the determination of the berthing velocity. However, previous studies have mostly focused on the size of the vessel. Therefore, the aim of this study is to analyze various features that influence berthing velocity and determine their respective importance. The data used in the analysis was based on the berthing velocity of a ship on a jetty in Korea. Using the collected data, machine learning classification algorithms were compared and analyzed, such as decision tree, random forest, logistic regression, and perceptron. As an algorithm evaluation method, indexes according to the confusion matrix were used. Consequently, perceptron demonstrated the best performance, and the feature importance was in the following order: DWT, jetty number, and state. Hence, when berthing a ship, the berthing velocity should be determined in consideration of various features, such as the size of the ship, position of the jetty, and loading condition of the cargo.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.4
• /
• pp.349-357
• /
• 2016

Recently, the quantity of risk in construction project has been inflated due to the fact that current construction projects have been large and complicated. Therefore, a study on the risk management methods is necessary that can predict and respond to the need in complicated modern construction projects. In this study, the objective is to analyze the cause of accident in actual construction sites and develop a risk assessment model based on insurance claims records. To reach the goal of this study, first, the frequency and severity of accidents are analyzed the causes of accidents based on the classification; progress rate, season, and total construction costs. Second, a risk assessment model is developed by utilizing a multiple regression analysis. The dependent variable is loss ratio of material damage and three categories; natural hazards, geographic information, and construction method & ability, are used as the independent variables. The model's adjusted R-square is 0.455. The contributions of this study will be used as a material for a quantitative risk analysis model development and review of the construction risk factors for future study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.204-210
• /
• 2019

In case of a fire inside a tunnel, unlike ordinary roads, it is very difficult for a driver to obtain visibility, and a large accident is highly likely to occur. In this study, the smoke behavior, visible distance, and CO concentration of a jet fan were analyzed using the NIST fire simulation (FDS). All analyses were set to HRRPUA (Heat Release Rate Per Area) 3.6MW/m and all the analysis times were set to 600s. In all analyses by CFD, the results were confirmed at y=30m and y=110m, and smoke behavior analysis, visible range analysis, and carbon monoxide concentration were confirmed according to the diameter and flow rate. As the size and flow rate of the jet fan increased, the visibility distance was high at y=30m, and the concentration of carbon monoxide was also confirmed to be 0 ppm. Therefore, proper setting of the jet fan diameter and flow rate will be an excellent solution for fires in tunnels, and taking refuge at upstream area of a re-ventilated fan can reduce the number of casualties.