• 한국도로학회논문집
• /
• 제16권4호
• /
• pp.111-118
• /
• 2014

PURPOSES: The purposes are to analyze the pedestrian accident severity and to develop the accident models by arterial road function. METHODS: To analyze the accident, count data and ordered logit models are utilized in this study. In pursuing the above, this study uses pedestrian accident data from 2007 to 2011 in Cheongju. RESULTS : The main results are as follows. First, daytime, Tue.Wed.Thu., over-speeding, male pedestrian over 65 old are selected as the independent variables to increase pedestrian accident severity. Second, as the accident models of main and minor arterial roads, the negative binomial models are developed, which are analyzed to be statistically significant. Third, such the main variables related to pedestrian accidents as traffic and pedestrian volume, road width, number of exit/entry are adopted in the models. Finally, Such the policy guidelines as the installation of pedestrian fence, speed hump and crosswalks with pedestrian refuge area, designated pedestrian zone, and others are suggested for accident reduction. CONCLUSIONS: This study analyzed the pedestrian accident severity, and developed the negative binomial accident models. The results of this study expected to give some implications to the pedestrian safety improvement in Cheongju.

• 한국안전학회지
• /
• 제32권5호
• /
• pp.179-185
• /
• 2017

Accident analysis is an essential process to make basic data for accident prevention. Most researches depend on survey data and accident statistics to analyze accidents, but these kinds of data are not sufficient for systematic and detailed analysis. We, in this paper, propose an accident classification model that extracts task type, original cause materials, accident type, and the number of deaths from accident reports. The classification model is a support vector machine (SVM) with word occurrence features, and these features are selected based on mutual information. Experiment shows that the proposed model can extract task type, original cause materials, accident type, and the number of deaths with almost 100% accuracy. We also develop an accident ontology to express the information extracted by the classification model. Finally, we illustrate how the proposed classification model and ontology effectively works for the accident analysis. The classification model and ontology are expected to effectively analyze various accidents.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.246-251
• /
• 2005

Accident scenarios analysis is a course to understand, analyze, and describe a process of an accident and behavior pattern of the parties to an accident. The method of accident scenarios is that we described patterns represented between accidents and hazardous conditions, and then provide data to prevent the accident. We have carried out scenarios analysis in various fields so far, but it was not taking account of system. In this research, we made a study on technology of accident scenarios analysis using QFD (Quality Function Deployment) to analyze systematically and evaluate quantitatively types of hazards and scenarios of railway accident. And we analyses accident scenarios of a subject of work-related fatality accident to railway employee and conducted risk assessment for different scenarios. Also we defined relation between unsafe events and hazardous conditions caused to work-related fatality accident, and attempted to quantitatively assess work-related fatality accident and the parties to accidents. The results of this research will be used in analyzing for important causes and contributing factors of work-related fatality accidents at the step of risk assessment of railway system, and quantitatively assessing frequency of work-related accidents and risk.

• 한국안전학회지
• /
• 제28권3호
• /
• pp.11-17
• /
• 2013

Forensic Engineering is the area covering the investigation of products, structures that fail to perform or do not function as intended, causing personal injury or damage to property. To investigate the mobile crane's overturn accident in terms of the forensic engineering, in this study, we identified the accident mobile crane's position and posture before accident by the analysis of the trace resulted by the contact between the outrigger and the ground, and the accident remodeling has been performed using CATIA modeling program in the basis of the accident mobile crane's position and posture information. The accident analysis has been performed by comparing this accident remodeling and the crane's specification, the table of the allowance load about the boom's length and the working radius. Through these studies, the safety accident that may occur in mobile crane can be minimized by performing specialized and systematic investigation of the accident cause in terms of the forensic engineering.

• 한국항공운항학회지
• /
• 제16권1호
• /
• pp.18-28
• /
• 2008

The purpose of this study is leading to prevent the major causes of commercial-aviation fatalities about controlled-flight-into-terrain(CFIT) in approach-and-landing accidents. The paper of major analysis for controlled flight into terrain(CFIT) was Guam accident, Mokpo accident and Gimhae accident in commercial transport-aircraft accidents from 1993 through 2002. CFIT occurs when an airworthy aircraft under the control of the flight crew is flown unintentionally into terrain, obstacles or water, usually with no prior awareness by the crew. This type of accident can occur during most phases of flight, but CFIT is more common during the approach-and-landing phase. Ninety-five percent of the Guam accident, Mokpo accident, and Gimhae accident where weather was known involved IMC, fog, and rain. The paper believed that prevention for CFIT accident was education and training for flying crew and upgrade for equipment such as EGPWS, and need more research for professional organizations of airlines, and accomplishing precision approaches should be a high priority.

• 자동차안전학회지
• /
• 제10권4호
• /
• pp.40-49
• /
• 2018

Currently, a lot of researches about high risk test scenarios for autonomous vehicle and advanced driver assistance systems have been carried out to evaluate driving safety. This study proposes new type of test scenario that evaluate the driving safety for autonomous vehicle by reconstructing accident database of national automotive sampling system crashworthiness data system (NASS-CDS). NASS-CDS has a lot of detailed accident data in real fields, but there is no data of accurate velocity in accident moments. So in order to propose scenario generation method from accident database, we try to reconstruct accident moment from accident sketch diagram. At the same step, we propose an accident of occurrence frequency which is based on accident codes and road shapes. The reconstruction paths from accident database are integrated into evaluation of simulation environment. Our proposed methods and processor are applied to MILS (Model In the Loop Simulation) and VILS (Vehicle In the Loop Simulation) test environments. In this paper, a reasonable method of accident reconstruction typology for autonomous vehicle evaluation of feasibility is proposed.

• 자동차안전학회지
• /
• 제13권3호
• /
• pp.69-77
• /
• 2021

Although accident data from the National Police Agency and insurance companies do not know the vehicle safety, the damage level information can be obtained from the data managed by the bus credit association or the bus company itself. So the accident severity was analyzed based on the side impact accidents using accident repair cost. K-means clustering analysis separated the cost of accident repair into 'minor', 'moderate', 'severe', and 'very severe'. In addition, the side impact accident severity was analyzed by using an ordered logit model. As a result, it is appeared that the longer the repair period, the greater the impact on the severity of the side impact accident. Also, it is appeared that the higher the number of collision points, the greater the impact on the severity of the side impact accident. In addition, oblique collisions of the angle of impact were derived to affect the severity of the accident less than right angle collisions. Finally, the absence of opponent vehicle and large commercial vehicles involved accidents were shown to have less impact on the side impact accident severity than passenger cars.

• 한국자동차공학회논문집
• /
• 제22권2호
• /
• pp.29-36
• /
• 2014

The accident statistics use the data from police accident reports and statistics. Although the official accident statistics are useful, they provide very limited information about how accidents occur, the cause of the accident and the injury mechanisms. This limitations could be overcome by carrying out the in-depth accident study and analysing investigations, collecting more detailed information. Meanwhile a net of in-depth investigation teams are operating worldwide, such as NASS (National Accident Sampling System) and CIREN (Crash Injury Research and Engineering Network) in US, OTS (On the spot investigation) in UK. In this study, the database structure and variables of Korea in-depth accidents investigation system would be proposed through considering the database structure of GIDAS (Germany In-Depth Accidents Study). GIDAS is one of the best system on the in-depth accident study system in the world. GIDAS was established in 1999 as a cooperation project between Federal Highway Research Institute of Germany (BASt) and research association on automotive engineering of German Car Industry(FAT). The iGLAD (Initiative for the Global Harmonization of Accident Data) was also considered to introduce into the database variables of Korea in-depth accident study. Current police reports were compared with GIDAS and iGLAD. To collaborate of the Worldwide in-depth accident data, this paper proposed that the database of Korea in-depth accident study would be introduced the structure of GIDAS and the core variables of iGLAD. Harmonization of the structures and core variables of Korea in-depth accident study will be better than the making unique ones. The database structure and core variables of KIDAS(Korea In-Depth Accident Study) introduced of GIDAS and iGLAD.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.192-204
• /
• 2012

For a severe accident of nuclear power plant, an approach to estimation of the radiological source term using a severe accident code(MELCOR) has been proposed. Although the MELCOR code has a capability to estimate the radiological source term, it has been hardly utilized for the radiological consequence analysis mainly due to a lack of understanding on the relevant function employed in MELCOR and severe accident phenomena. In order to estimate the severe accident source term to be linked with the radiological consequence analysis, this study proposes 4-step procedure: (1) selection of plant condition leading to a severe accident(i.e., accident sequence), (2) analysis of the relevant severe accident code, (3) investigation of the code analysis results and post-processing, and (4) generation of radiological source term information for the consequence analysis. The feasibility study of the present approach to an early containment failure sequence caused by a fast station blackout(SBO) of a reference plant (OPR-1000), showed that while the MELCOR code has an integrated capability for severe accident and source term analysis, it has a large degree of uncertainty in quantifying the radiological source term. Key insights obtained from the present study were: (1) key parameters employed in a typical code for the consequence analysis(i.e., MACCS) could be generated by MELCOR code; (2) the MELOCR code simulation for an assessment of the selected accident sequence has a large degree of uncertainty in determining the accident scenario and severe accident phenomena; and (3) the generation of source term information for the consequence analysis relies on an expert opinion in both areas of severe accident analysis and consequence analysis. Nevertheless, the MELCOR code had a great advantage in estimating the radiological source term such as reflection of the current state of art in the area of severe accident and radiological source term.

• 대한인간공학회지
• /
• 제16권3호
• /
• pp.61-70
• /
• 1997

This study is undertaken to investigate the differences of accident characteristics between occupational deaths and nonfatal injuries in overall industry of Korea. The national statistics of industrial accidents in the years 1991-1994 were extracted from the annual publications of Ministry of Labor. To make the statistical comparisons for the accident characteristics, we derived the destributions of occupational deaths and injuries in terms of injured person's age, work experience, tiem of accident, activity at time of accident, accident type, injury type, injured part of body, and agency of accident. The results show that the distributions of the occupational deaths are significantly different from those of the nonfatal injuries in all characteristics investigated in this study. These findings indicate that the accident prevention programs should be developed and implemented by taking into account the characteristics of working environments based on accident analysis.