• Journal of Korean Society of Transportation
• /
• v.35 no.1
• /
• pp.25-36
• /
• 2017

The purpose of this study is to analyze traffic accident reduction effect of the introduction of motorcycle safety inspection. To analyze the effect of motorcycle inspection, we first estimate the number of defective motorcycles, and calculate the probability of accident occurrences caused by the defect using four year traffic accident data. Finally, we estimate the number of reduced accidents due to the introduction of the inspection and the total reduced accident cost. In this study, we analyzed three scenarios. It is analyzed that when the safety inspection system is applied to all motorcycles, 642 cases of traffic accidents and 325 million won per year of traffic accident costs are reduced. It is approximately 0.1% of 2014 total traffic accident cost of 26.5725 trillion won per year. It suggests that the cost of traffic accidents and traffic accidents due to vehicle factors are reduced when the safety inspection system is introduced.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.12
• /
• pp.55-63
• /
• 2003

The traffic accident is the prerequisite of the traffic accident reconstruction. In this study, the traffic accident (forward collision) and traffic accident reconstruction (inverse collision) simulations are conducted to improve the quality and accuracy of the traffic accident reconstruction. The vehicle and tire models are used to simulate the trajectories for the post-impact motion of the vehicles after collision. The impact dynamic model applicable to the forward and inverse collision simulations is also provided. The accuracy of impact analysis for the vehicular collision depends on the accuracy of the coefficients of restitution and friction. The neural network is used to estimate these coefficients. The forward and inverse collision simulations for the multi-collisions are conducted. The new method fur the accident reconstruction is proposed to calculate the pre-impact velocities of the vehicles without using the trial and error process which requires the repeated calculations of the initial velocities until the forward collision simulation satisfies with the accident evidences. This method estimates the pre-impact velocities of the vehicles by analyzing the trajectories of the vehicles. The vehicle slides on a road surface not only under the skidding during an emergency braking but also under the steering. A vehicle over steering or cornering with excessive speed loses the traction and leaves tile yaw marks on the road surface. The new critical speed formula based on the vehicle dynamics is proposed to analyze the yaw marks and shows smaller errors than ones of the existing critical speed formula.

• Journal of the Society of Disaster Information
• /
• v.11 no.2
• /
• pp.219-225
• /
• 2015

Hydrofluoric acid leakage accident was occurred on Dec. 2012 in Hube Global. That accident has bought many changes of response in national organizations. Chemical companies respond quickly even when small quantities leakage of chemicals and response agencies were put a lot of manpower and equipment in incident response. Incident response to the response activities of the agents is difficult if the accident substance was not identified. Unknown chemicals can be generated by the water for fire-fighting during the emergency response process. In this case, an additional information was needed for response of chemical accident to prevent of great damage. In this study, we investigated the improvement of chemical accident information by extraordinary chemical accident.

• Nuclear Engineering and Technology
• /
• v.47 no.1
• /
• pp.33-46
• /
• 2015

During the past 10 years, the Korea Atomic Energy Research Institute (KAERI) has performed a study to control hydrogen gas in the containment of the nuclear power plants. Before the Fukushima accident, analytical activities for gas distribution analysis in experiments and plants were primarily conducted using a multidimensional code: the GASFLOW. After the Fukushima accident, the COM3D code, which can simulate a multidimensional hydrogen explosion, was introduced in 2013 to complete the multidimensional hydrogen analysis system. The code validation efforts of the multidimensional codes of the GASFLOW and the COM3D have continued to increase confidence in the use of codes using several international experimental data. The OpenFOAM has been preliminarily evaluated for APR1400 containment, based on experience from coded validation and the analysis of hydrogen distribution and explosion using the multidimensional codes, the GASFLOW and the COM3D. Hydrogen safety in nuclear power has become a much more important issue after the Fukushima event in which hydrogen explosions occurred. The KAERI is preparing a large-scale test that can be used to validate the performance of domestic passive autocatalytic recombiners (PARs) and can provide data for the validation of the severe accident code being developed in Korea.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.1
• /
• pp.127-136
• /
• 2008

In these days, frequency of constructions on e freeway are increasing according as growing of the importance of e road maintenance and the road management. Work zone on the freeway where vehicles pass with high speed needs control method of lane closure and construction equipment. Because there are seldom researches in domestic study about reflecting characteristics of domestic road, sometimes we have applied for foreign cases to our traffic circumstance but it is not proper to apply for standard of other countries in our cases. foreign nation has different country square, condition of road, and level of people mind. Therefore, this study shows traffic accident characteristics in freeway work zones in Korea. At first, this study collected traffic accident data which include for 3 years $2003{\sim}2005$ in the whole freeway in Korea and then divided the data to five parts - level of the accident, type of the construction work, type of the accident, reason of the accident, according to geometric. According to comparing with non-work zones accident, this study found traffic accident characteristics in freeway work zones in Korea and suggested some alternative ideas for safety of work zones.

• Journal of Digital Convergence
• /
• v.16 no.10
• /
• pp.213-222
• /
• 2018

This study was conducted to derive the traffic accident risk index through the recognition of the elderly driver's driving pattern to reduce the traffic accident rate of elderly drivers and to reflect them in the renewal and return policy of driver's license accordingly. First, the traffic accident risk index is defined by analyzing the behavioral characteristics of older drivers to derive the major factors that lead to traffic accidents. Second, we present a method to measure the traffic accident risk index from the driving pattern of the elderly through the smart-phone, the camera and the distance sensor attached to the car. Finally, we derive three thresholds by computer simulation and determine the accident risk from the measured traffic accident risk index as four steps and suggest ways to ensure safe driving of older drivers. It is required to objectively assess the driving ability of an aged driver in accordance with the proposed method, and to induce the driver to reset the driver's license renewal cycle and voluntarily return the driver's license to minimize social costs due to increased traffic accidents.

• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.482-490
• /
• 2017

This study is a railway accident investigation statistic study with the purpose of prediction and classification of accident severity. Linear regression models have some difficulties in classifying accident severity, but a logistic regression model can be used to overcome the weaknesses of linear regression models. The logistic regression model is applied to escalator (E/S) accidents in all stations on 5~8 lines of the Seoul Metro, using data mining techniques such as logistic regression analysis. The forecasting variables of E/S accidents in urban railway stations are considered, such as passenger age, drinking, overall situation, behavior, and handrail grip. In the overall accuracy analysis, the logistic regression accuracy is explained 76.7%. According to the results of this analysis, it has been confirmed that the accuracy and the level of significance of the logistic regression analysis make it a useful data mining technique to establish an accident severity prediction model for urban railway casualty accidents.

• Korean Journal of Occupational Health Nursing
• /
• v.18 no.1
• /
• pp.98-105
• /
• 2009

Purpose: This study was to analyze the current preventive measures on alcohol-involved accident and the factors that affect such preventive measures in the construction industry. Method: The survey was administered to examine how the preventive measures on alcohol-involved accident were executed using the data of '2005 Occupational Safety and Health Survey' conducted in 2005 by the Occupational Safety and Health Research Institute. For this study, we analyzed 944 work places in the construction industry. Result: The preventive measures on alcohol-involved accident were being executed in 62.1% of construction companies. As for the number of actual preventive measures on alcohol-involved accident, work places in Jeolla-do executed 2.63 times more frequently than those in Chungcheong-do, and work places with the Occupational Safety and Health Conference executed 2.22 times more frequently than those without such a measure. Conclusion: Joining the Occupational Safety and Health Conference was to be one of the most influential ways of preventive measures on alcohol-involved accident in the construction industry. Accordingly, if workers and employers look for active measures and administer them through the Occupational Safety and Health Conference, it will reduce alcohol-involved accident in the construction industry and contribute to the better preventive measures on alcohol-involved accident in the construction and other industries.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.5
• /
• pp.836-842
• /
• 2016

When an accident occurs in the nuclear power plant, the faulted information might mislead to the high possibility of aggravating the accident. At the Fukushima accident, the operators misunderstood that there was no core exposure despite in the processing of core damage, because the instrument information of the reactor water level was provided to the operators optimistically other than the actual situation. Thus, this misunderstanding actually caused to much confusions on the rapid countermeasure on the accident, and then resulted in multiplying the accident propagation. It is necessary to be equipped with the function that informs operators the status of instrument integrity in real time. If plant operators verify that the instruments are working properly during accident conditions, they are able to make a decision more safely. In this study, we have performed various tests for the fault detection sensitivity of an data-driven empirical model to review the usability of the model in the accident conditions. The test was performed by using simulation data from the compact nuclear simulator that is numerically simulated to PWR type nuclear power plant. As a result of the test, the proposed model has shown good performance for detecting the specified instrument faults during normal plant conditions. Although the instrument fault detection sensitivity during plant accident conditions is lower than that during normal condition, the data-drive empirical model can be detected an instrument fault during early stage of plant accidents.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.3
• /
• pp.249-256
• /
• 2021

Fatal accidents in the construction industry account for a higher proportion than other industries, and in particular, the collapse accident of formwork is likely to lead to a serious accident like death. This study aim to derive the importance ranking of formwork collapse factors using AHP technique for preventing fatal accident. The AHP survey was conducted on field construction engineers, construction project managers, safety managers, and formwork specialist foreman with 10 years on site experience. The results of AHP analysis is that the most importance factor of formwork collapse accident is 'non-compliance with the formwork shoring assembly drawing'. Next it is important in the order of 'poor installation of formwork shoring and accessories', 'formwork shoring is not installed vertically', 'non-compliance with the concrete curing period of the formwork shoring', 'safety supervisor not designated and negligent'. It is necessary to preferentially and intensively manage the high importance factors presented as a result of this research for reducing formwork collapse accident. In addition, it will contribute to reducing construction safety accidents if the factors of the formwork collapse accident suggested in this research are included in the formwork inspection check list and checked step by step in formwork construction.