• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.347-352
• /
• 2004

The unsteady aerodynamic characteristics of an aerofoil gradually accelerating or decelerating at subsonic speeds are investigated through two-dimensional, unsteady, compressible Navier-Stokes simulations. An acceleration factor is defined to provide various acceleration or deceleration characters of the time-dependent flow over the aerofoil. The results show that an increase in the absolute value of the non-dimensional acceleration factor leads to a lesser change in the location and range of flow featues such as shockwave and boundary layer separation in a specific time range. Generally, the gradual speed-up and speed-down of the subsonic aerofoil results in different aerodynamic characteristics whose changes are more significant at angles of attack.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.731-734
• /
• 2004

Admixture compounds for reducing setting time and accelerating early strength development of redispersible polymer powder-modified mortars were made by mixing various inorganic accelerating inorganic materials. Redispersible polymer powder-modified mortars are prepared with various accelerator contents, and it was tested for setting time, flexural and compressive strengths. As a result, the accelerators contribute to strength development of the mortars in the early curing age of 12h or less. In the viewpoint of early strength development of redispersible polymer powder-modified mortars, an accelerator content of $20\%$ is recommended.

• 한국전기전자재료학회논문지
• /
• 제15권1호
• /
• pp.93-101
• /
• 2002

In this study, the stator form-winding sample coils based on silicone resin and polyimide were made for fault prediction and reliability estimation on the C-Class(200$\^{C}$ ) insulation system of traction motors. The complex accelerative degradation was periodically performed during 10 cycles, which was composed of thermal stress, fast rising surge voltage, vibration, water immersion and overvoltage applying. After aging of 10 cycles, the condition diagnosis test such as insulation resistance '||'&'||' polarization index, capacitance '||'&'||' dielectric loss and partial discharge properties were investigated in the temperature range of 20 ∼ 160$\^{C}$. Relationship among condition diagnosis tests was analyzed to find a dominative degradation factor and an insulation state at end-life point.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.1983-1985
• /
• 2005

This paper describes moisture content, dielectric strength and dielectric properties of thermally accelerating aged insulating paper as varnish treatment. Kraft, nomex paper were impregnated with diluted varnish, varnish and solvent were diluted in the ratio of 40wt%, in vacuum condition, and then completely dried. To analysis of papers were influenced by varnish treatment, we applied thermal stress, and then measured moisture content, dielectric strength and relative permittivity, $tan{\delta}$ as varnish impregnated papers.

• 한국작물학회지
• /
• 제21권1호
• /
• pp.57-64
• /
• 1976

Enforcing germination to the premature seed green vernalization under constant vitalux-A illumination and exposing to higher room temperature during ripening stage, were successively applied during wheat and barley raising for the sake of the accelerating generation advancement in greenhouse. By application of this method, the winter habit variety 'Buheung' required only 77 days for 1 generation and could raise 4.5 generations during one year. one year.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.763-766
• /
• 2000

In this paper, stator form-winding sample coils based on silicone resin and polyimide were made for fault prediction and reliability estimation on the 200 Class insulation system of traction motors. The complex accelerative degradation was performed by periods during 10 cycles, which was composed of thermal stress, fast rising surge voltage, vibration, water immersion and overvoltage applying. After aging of 10 cycles, condition diagnosis test such as insulation resistance & polarization index, capacitance & dielectric loss and partial discharge properties were investigated in the temperature range of 20∼160$^{\circ}C$. Relationship among condition diagnosis test was analyzed to find an dominative degradation factor and an insulation state at end-life point.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.180-182
• /
• 1995

The equivalent circuit of SLIM is composed of the circuit parameters. They can be obtained from the electromagnetic theory. The accelerating characteristics of SLIM are the best efficiency when synchronous speed changed continuously. The paper outlines a method of acceleration for an accelerated field system in which it is desired to reduce the overall length to a minimum, assuming a limit on the amount of heat which can be generated in the secondary member. The paper then shows that a primary unit designed to give several discrete field speeds only, as opposed to one with continuous speed variation, is not significantly inferior in performance to the latter but is much easier to manufacture.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.538-542
• /
• 1995

The etching characteristics of magnetic thin films of permalloy and Fe-based alloys are investigated. The thin films are fabricated by rf magnetron sputtering and the substrates used are silicon and glass. Etching is done by ion beam technique and the main process parameters investigated are beam voltage, beam current and accelerating voltage. The etch rate of the magnetic films is proportional to the beam current, but it is not directly related to the accelerating voltage and beam voltage. The dependence of etch rate on the process parameters can be explained by ion current density. It is found that the ion beam etching is effective in obtaining well-developed micro-patterns on the permalloy and Fe- based magnetic thin films.

• Current Photovoltaic Research
• /
• 제9권2호
• /
• pp.36-44
• /
• 2021

To endorse the reliability and durability of the solar photovoltaic (PV) device several tests were conducted before exposing to the outdoor field in a non-ideal condition. The PV module has high probability that intend to perform adequately for 30 years under operating conditions. To evaluate the long term performance of the PV module in diversified terrestrial conditions, one should use the outdoor performance data. However, no one wants to wait for 25 years to determine the module reliability. The accelerating stress tests performing in the laboratory by mimicking different field conditions are thus important to understand the performance of a PV module. In this review, we will discuss briefly about different accelerating stress types, levels and prioritization that are used to evaluate the PV module reliability and durability before using them in real field.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 춘계학술발표대회
• /
• pp.250-253
• /
• 2011

Chip manufacture nowadays turned their attention from accelerating uniprocessors to integrating multiple cores on a chip. Moreover desktop graphic hardware is now starting to support general purpose computation. Desktop users are able to use multi-core CPU and GPU as a high performance computing resources these days. However exploiting parallel computing resources are still challenging because of lack of higher programming abstraction for parallel programming. The 2-dimensional discrete cosine transform (2D-DCT) algorithms are most computational intensive part of JPEG encoding. There are many fast 2D-DCT algorithms already studied. We implemented several algorithms and estimated its runtime on multi-core CPU and GPU environments. Experiments show that data parallelism can be fully exploited on CPU and GPU architecture. We expect parallelized DCT bring performance benefit towards its applications such as JPEG and MPEG.