• Journal of the Korean Operations Research and Management Science Society
• /
• v.31 no.4
• /
• pp.139-155
• /
• 2006

The facility location problem of this paper is distinguished from the maximal covering location problem and the flxed-charge facility location problem. We propose the maximal profiting location problem (MPLP) that is the facility location problem maximizing profit with multi-product. We apply to the simulated annealing algorithm, the stochastic evolution algorithm and the accelerated simulated annealing algorithm to solve this problem. Through a scale-down and extension experiment, the MPLP was validated and all the three algorithm enable the near optimal solution to produce. As the computational complexity is increased, it is shown that the simulated annealing algorithm' is able to find the best solution than the other two algorithms in a relatively short computational time.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.1020-1025
• /
• 2005

The set covering(SC) problem has many practical application of modeling not only real world problems in civilian but also in military. In this paper we study optimal allocation model for maximizing utility of consolidating old fashioned and new air defense weapon system like Patriot missile and develop the new computational algorithm for the SC problem by using simulated annealing(SA) algorithm. This study examines three different methods: 1) simulated annealing(SA); 2) accelerated simulated annealing(ASA); and 3) selection by effectiveness degree(SED) with SA. The SED is adopted as an enhanced SA algorithm that the neighboring solutions could be generated only in possible optimal feasible region at the PERTURB function. Furthermore, we perform various experiments for both a reduced and an extended scale sized situations depending on the number of customers(protective objective), service(air defense), facilities(air defense artillery), threat, candidate locations, and azimuth angles of Patriot missile. Our experiment shows that the SED obtains the best results than others.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.761-766
• /
• 2002

This paper was peformed to verify the effect that granulated blast furnace slag gets in reinforcement corrosion resistance about chloride ion that invade from outside. An experiment accelerated for the reinforcement corrosion through repeat of brine digestion and dry. Reinforcement corrosion investigated half cell potential method of measurement by ASTM C876 and corrosion area ratio. If granulated blast furnace slag metathesis ratio is high generally that looked the corrosion of reinforcement decreasing as a result that evaluate reinforcement corrosion by ASTM C876 canon in this research. It showed high resistance about reinforcement corrosion that use normal portland cement and increase the metathesis rate of granulated blast furnace slag, as a result that evaluate metathesis rate effect of granulated blast furnace slag according to cement kind. when the test piece split destroying, area rate of reinforcement corrosion showed about result of half cell potential measurement.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.10
• /
• pp.1688-1693
• /
• 2016

In this study shall investigate the influence upon the electrical property of transformer oil due to the heat among accelerated heat degradation experiment for a constant hour in the typical insulation oils of mineral base oil, silicon base oil and vegetable oil. In addition, the electric insulation performance of insulation materials in transformer shall be evaluated through the electric property analysis according to the heat degradation of epoxy insulation material, which has been used for electric facilities such as a molded transformer.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2001.11a
• /
• pp.13-16
• /
• 2001

In this paper, the emission and aging properties of ZnS:Cu electroluminescent device were experiment respectively at room temperature and 7$0^{\circ}C$ relative humidity 100%. ZnS:Cu and BaTiO$_3$were respectively used for phosphor and dielectric. While AC 100V on 400Hz frequency were applied to the devices at room temperature and 70$_3$relative humidity 100%, the change of brightness were measured and compared. The surface of aged devices were investigated by scanning electron microscope. With the continuously operated environment of room temperature and 7$0^{\circ}C$ relative humidity 100%, the decay time were measured and the dark spot and aging status on the surface of the device were investigated. ZnS:Cu electroluminescent properties were deteriorated by the Increased temperature and humidity. Also the deteriorated properties were confirmed by the brightness and surface chanties of device, and the aging mechanism from the simulation on sulfur vacancy and deep tracts density.

• Journal of Mechanical Science and Technology
• /
• v.18 no.4
• /
• pp.664-670
• /
• 2004

Navier-Stokes computation based on a new simplified model is proposed to investigate the interactions of a moving shock wave with multiple vortices arranged in the serial manner. This model problem simulates shock-vortexlet interactions at the shear layer of a compressible vortex often observed in the experiment. Applying the Foppl's idea, we extended the Rankin's model generally used for the description of a single vortex to the multi-vortex version. The acoustic pulses accelerated and decelerated are successively generated and propagated from each shock-vortex interaction, which simply explains the genesis of eccentrically diverging acoustic waves appearing in the experimental photograph.

• Journal of Pharmaceutical Investigation
• /
• v.2 no.1
• /
• pp.52-57
• /
• 1972

There are many reports on the stability of drugs in powders and various dosage forms. The author studied on the stability of ascorbic acid mixed with talcs. From the result of this experiment, it was considered that talcs markedly accelerated oxidative degredation of ascorbic acid in powders and the acceleration rate depends on the varieties of crude talcs. Iron salts seem to be the principal factor influencing the degradation of ascorbic acid Degradation rate of ascorbic acid mixed with purified talc is significantly slower than that with the crnde talcs. The more the concetration of ascorbic acid is diluted, the faster the degradation rate and degredation rate of Ascorbic acid is the function of tme.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.50-51
• /
• 2006

The nanofibrous scaffolds were obtained by co-electrospinning PHBV and collagen Type I in HIFP. The resulting fiber diameters were in the range between 300 and 600 nm. The nanofiber surfaces were characterized by ATR-FTIR, ESCA and AFM. The PHBV and collagen components of the PHBV-Col nanofibrous scaffold were biodegraded by PHB depolymerase and a collagenase Type I aqueous solution, respectively. It was found, from the cell-culture experiment, that the PHBV-Col nanofibrous scaffold accelerated the adhesion of the NIH 3T3 cell compared to the PHBV nanofibrous scaffold, thus showing a good tissue engineering scaffold.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.691-694
• /
• 2005

The present study was to examine the influence of porosity and moisture content on the water permeability, strength and plant-growth characteristics of porous concrete. The result of the experiment verified that the coefficient of permeability of porous concrete with porosity between $30\%\;and\;36\%$ increased by 2cm/sec and the compressive strength decreased 1MPa at every $3\%$ increase of porosity. In addition, the plant growth of porous concrete showed 5cm at $36\%$ porosity and 2.5cm at $30\%$ porosity respectively. Thus, the higher the porosity, the more the plant grew. When $2\%$ moisture content was used in porous concrete with the same porosity, the plant growth was accelerated two times faster than the case without it.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.513-518
• /
• 2003

Recently, advanced systems for water treatment are introduced for water quality improvement. One of those systems is water treatment method using ozone($O_3$). For it has strong oxidizing energy, it is necessary to have materisl stability against $O_3$. In this paper, epoxy resin specimens using as anticorrosive material of concrete structure for drink water are used to serve as a material of deterioration evaluation. It is to be studied weight loss, surface corrosion of specimens, ingredient analysis of floating particle, a solute of chemical ingredient by way of accelerated ozone testing. As the results of experiment, specimen weight is decreased. The surface of specimen is eroded heavily and showed a loss of gloss and floating particle, and in the stability for drinking water, harmful ingredient is not detected in the water.