• 한국전기전자재료학회논문지
• /
• 제28권4호
• /
• pp.238-243
• /
• 2015

The vegetable insulating oils are substitute for the mineral oil in power transformer. Vegetable insulating oils has higher flash/fire point and biodegradability than conventional mineral oils. In this paper, we investigated the dissolved gas analysis of vegetable oils. In the experiment, I had to accelerated aging under the same conditions mineral oil and vegetable oils. Accelerated aging proceeded to about 100% of the life of oil-filled transformer. In addition, we performed gas analysis of insulating oil of accelerated aging progress. The experiment results of the five gases was measured with the exception of Hydrogen and Acetylene. The mineral oil and vegetable oils gas is generated in a similar tendency depending on the accelerated aging. As a result, vegetable oils, can be dissolved gas analysis by method such as mineral oil.

• 한국전기전자재료학회논문지
• /
• 제20권8호
• /
• pp.691-696
• /
• 2007

In this study accelerated aging test equipment was developed to simulate domestic weather condition for accelerated aging test of polymer housed distribution surge arresters. Polymer arresters were aged for 3,000 hours by this test equipment and chemical and electrical characteristics analysis of surge arresters were conducted after aging test. In addition, performance assessment of outdoor installed arresters for 3 years was conducted to compare aging effect between accelerated aging test and natural aging. Through this experiment it is verified that the capability of the proposed aging test for simulating natural aging and the housing material and disconnector of domestic polymer arresters can be deteriorated by the long time field operation.

• 전기학회논문지
• /
• 제61권8호
• /
• pp.1148-1152
• /
• 2012

The vegetable-based insulating oils are substitutes for mineral oils in oil-filled transformer. The important properties of vegetable insulating oil is their higher flash/fire point and biodegradability than conventional mineral oils. The large oil-filled transformer eliminate the risk of explosion and fire should the transformer fail and oil ignite owing to high flash/fire point of vegetable insulating oil. In addition, higher biodegradability of vegetable insulating oils can let the oil spill damage reduced. In this experiment, the real oil-filled transformers using mineral oil and vegetable oil have accelerated aging. After working on the 100% accelerated aging experiment were conducted comparing the transformer. The hottest-spot temperature using thermal coefficients were calculated to determin the degree of accelerated aging. As a result, apply mineral oil transformer in accordance with the accelerated aging life come to an end. In contrast, vegetable insulating oils showed the opposite characteristics. Vegetable insulating oil compared to the mineral oil are found to be an long life. As a result, the vegetable oil has a long-term stability.

• 한국작물학회지
• /
• 제47권2호
• /
• pp.123-126
• /
• 2002

Lipoxygenase might be associated with seed deterioration by catalyzing the incorporation of molecular oxygen into fatty acids and generating free radicals. This study was performed to determine whether seed lipoxygenase activity would alter soybean seed longevity. In this study, germination percentage of lipoxygenase-lacking cultivar Jinpumkong2 (lx1lx1lx2lx2lx3lx3) was lower than that of Taekwangkong (Lx1Lx1Lx2Lx2Lx3Lx3). Segregation ratio for the three lipoxygenase isozymes of the F2-derived from the cross between Taekwangkong and Jinpumkong2 was fitted to 9 (Lx1Lx2Lx3) : 3 (Lx1Lx2lx3) : 3 (lxllx2Lx3) : 1 (lx1lx2lx3), suggesting the tight linkage between the Lx1 and Lx2 loci. Germination percentages varied widely but not differed among lipoxygenase isozyme types of F$_3$ seeds before and after accelerated aging. Seed coat of Jinpumkong2 was damaged severely following accelerated aging, whereas that of Taekwangkong was not. Thus, seed of lipoxygenase-lacking soybean cultivar, Jinpumkong2 showed greater deterioration compared with that of the normal Taekwangkong. However, the presence or absence of lipoxygenase activity had no effect on soybean germination.

• 한국화재소방학회논문지
• /
• 제25권2호
• /
• pp.107-113
• /
• 2011

차동식 스포트형 공기 팽창식 열감지기를 인위적으로 높은 온도에서 가속열화시켜 경년변화되는 특성에 대하여 연구하였다. 이 연구는 현장에 설치된 감지기가 화재 또는 점검기기에 의한 고온의 열에 노출되었을 경우에 감지기의 동작에 미치는 영향을 분석하기 위하여 실험하였다. 실험결과 현장에서 5년 동안 사용되었던 2005년 B사 감지기는 $100^{\circ}C$의 온도에서 1시간 동안 노출되었을 경우에 감지기가 동작하지 않는 경우가 발생하였다. 이것은 감지기 감열실내의 팽창된 공기가 리크공 이외의 곳에서 리크 되었기 때문인 것으로 판단된다. 그러나 감지기의 동작표시를 나타내는 LED는 온도가 $160^{\circ}C$까지 올라갔음에도 불구하고 모두 정상적으로 동작하였다. 따라서 동작표시 LED의 회로소자는 고장은 발생하지 않았음을 알 수 있었다.

• 펄프종이기술
• /
• 제38권3호
• /
• pp.66-71
• /
• 2006

The objective of this study was to find in what color Hanji(Korean hand-made paper) is dyed when it is dyed with a pigment extracted from clove tree using different kinds of mordant, and how the paper is discolored and variety of strength under the condition of accelerated aging test. The results of this experiment are as follows. The Hanji dyed with aluminum acetate mordant was colored yellowish brown at pH 4.82, discoloration after aging was as much as a slight difference of color was recognized, and the decrease of strength after aging test was small. Thus, the method using aluminum acetate mordant was usable in coloring Hanji. The second most useful Hanji dyeing moth of was using distilled water and ferrous sulfate mordant, which dyed Hanji light brown at pH 6.03. However, when pigment was extracted using distilled water and copper sulfate mordant was used, discoloration was satisfactory but strength decreased too much and pale brown was obtained. Thus, this method was not usable.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권2호
• /
• pp.149-157
• /
• 2003

The purpose of this paper is to quantitatively investigate aging state of epoxy coating on containment structure at nuclear power plant. In order to evaluate an physical bonding of the epoxy coating, adhesion test was performed on a degraded epoxy coating on concrete specimens fabricated by accelerated aging experiment. In addition, impedance data by ultrasonic test were measured to compare with adhesion data. From almost 50 % of the specimens, aging phenomena of epoxy coating such as pin hole, blistering was discovered. To improve reliability on quality degradation of epoxy, co-relation between two kinds of different data was analyzed. By tracing co-related these data, it was possible to figure out physical state of as-built epoxy coating. The possibility to develop new methodology of time - dependent aging state on epoxy coating was found and discussed.

• 한국전기전자재료학회논문지
• /
• 제30권12호
• /
• pp.817-821
• /
• 2017

As a ZnO varistor is subjected to electrical and environmental stresses, it degrades gradually, which may result in power interruption by short circuit. This study investigates changes in the electrical characteristics of ZnO varistors due to deterioration owing to energy absorption, and determines the optimal parameters for on-line diagnosis of the varistor. Two types of varistors were used for an accelerated aging experiment involving the application of the $8/20{\mu}s$ standard lightning impulse current. The electrical characteristics in terms of the reference voltage, total leakage current, resistive leakage current, and third-harmonic component of the total leakage current were measured, and their change rates were analyzed. The results revealed that the total leakage current increased slightly with an increase in the varistor absorbed energy, while the resistive leakage current and the third-harmonic component increased apparently. Therefore, the third-harmonic component of the total leakage current was proposed as the optimal parameter for on-line monitoring of ZnO varistor conditions.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2001년도 학술대회논문집
• /
• pp.13-16
• /
• 2001

In this paper, the emission and aging properties of ZnS:Cu electroluminescent device were experiment respectively at room temperature and 7$0^{\circ}C$ relative humidity 100%. ZnS:Cu and BaTiO$_3$were respectively used for phosphor and dielectric. While AC 100V on 400Hz frequency were applied to the devices at room temperature and 70$_3$relative humidity 100%, the change of brightness were measured and compared. The surface of aged devices were investigated by scanning electron microscope. With the continuously operated environment of room temperature and 7$0^{\circ}C$ relative humidity 100%, the decay time were measured and the dark spot and aging status on the surface of the device were investigated. ZnS:Cu electroluminescent properties were deteriorated by the Increased temperature and humidity. Also the deteriorated properties were confirmed by the brightness and surface chanties of device, and the aging mechanism from the simulation on sulfur vacancy and deep tracts density.

• 펄프종이기술
• /
• 제35권1호
• /
• pp.48-53
• /
• 2003

The objective of this study was to find in what color Korean handmade paper(Hanji) is dyed when it is dyed with a pigment extracted from waste onion peelings using different kinds of mordant, and how the paper is discolored and variety of strength under the condition of accelerated aging test. The results of this experiment are as follows. 1. Korean handmade paper was dyed in different colors according to the kinds of mordant. Mainly it was dyed in orange-brown, and sometimes in gold or khaki. 2. Korean handmade paper dyed was not discolored much, which suggests that the pigment is strong under the condition of aging. 3. As for durability, Korean handmade paper dyed in gold was strongest. Korean handmade paper, to which aluminum sulfate, iron sulfate or sodium dichromate was applied as mordant, had poor durability. Thus, these were not suitable as mordant.