• 제목/요약/키워드: absorption rate

검색결과 2,253건 처리시간 0.027초

Comparative Estimation of Exposure Level and Health Risk Assessment of Highly Produced Pesticides to Agriculture Operators by Using Default Dermal Absorption Rate or Actual Measurement Values

  • Kim, Su-Hyeon;Lee, Chang-Hun;Kim, Ki-Hun;Jeong, Sang-Hee
    • 대한의생명과학회지
    • /
    • 제22권4호
    • /
    • pp.199-206
    • /
    • 2016
  • Pesticides are widely used to prevent loss of agricultural production but extensive exposure can induce health problems to pesticide operators. This study was performed to evaluate the health risk of highly produced pesticides used in fruit growing farm land by comparison of estimated exposure level with AOEL using KO-POEM program. AOEL was driven based on NOAEL of each pesticide evaluated by JMPR, EFSA or KRDA. In calculation of exposure level, types of formulation, dilution factors, spraying duration and motor type and exposure protection device were allocated according to actual condition of use. Dermal absorption rate was differently applied among EFSA default values (25% or 75%), general default value (10%) or real test result values to know the plausibility of default values and safety of pesticide to operators in outline. Twenty pesticide ingredients (fungicides and insecticides) were produced more than 30 tons per year, which were mancozeb, chlorothalonil, imidaclopirid and etc in order. Dermal absorption rates obtained from studies were various from 0.07 to 81% but mostly under 10%. The estimated exposure levels showed big differences more than 10 times higher when using EFSA default rate and up to 5 times higher when using general rate of 10% comparing using rates of test results. Mancozeb, chlorthalonil, diazinon and chlorpyrifos presented still higher exposure level than AOEL even when using test absorption rate from study, which suggests that re-evaluation of AOEL or dermal exposure absorption rate or strict management are required for health protection of operators who use those four pesticides in farm land.

Oxyfluorfen 처리(處理)에 따른 내성선발(耐性選拔) 수도품종(水稻品種)의 흡수(吸收) 및 이행(移行) 차이(差異) (Differential Absorption and Translocation of Oxyfluorfen Between Selected Rice Cultivars)

  • 구자옥;석총호조;변종영
    • 한국잡초학회지
    • /
    • 제8권1호
    • /
    • pp.37-44
    • /
    • 1988
  • 기히 선발(選拔)된 oxyfluorfen에의 내성(耐性) 및 감수성(感受性) 품종(品種)(군(群))에 대한 생리적차이(生理的差異)를 확인(確認)하기 위하여 $^{14}C$-제초제(除草劑)를 이용(利用)한 일련의 흡수(吸收) 이행(移行) 시험(試驗)을 수행(遂行)하였으며, 결과(結果)를 요약(要約)하면 다음과 같다. 시험(試驗) 1. 선발품종군간(選拔品種群間)의 흡수(吸收) 및 이행차이(移行差異) -감수성품종군(感受性品種群)은 단위건물중당(單位乾物重當)의 근부(根部) 흡수량(吸收量), 하위경부흡수량(下位莖部吸收量), 상위경부흡수량(上位莖部吸收量) 및 전체흡수량(全體吸收量)에서 각각 내성품종군(耐性品種群)의 209%, 193%, 344% 및 204%에 이르렀고, 지상부(地上部)로의 이행율(移行率)도 152%에 달(達)하는 정도로 높았다. 시험(試驗) 2. 선발품종간(選拔品種間)의 약제침지부위(藥劑沈漬部位) 및 시간(時間)에 따른 흡수(吸收) 및 이행차이(移行差異) -품종(品種)에 관계(關係)없이 뿌리흡수(吸收)는 되었으나 이행(移行)은 극히 제한(制限)되었다. -하단경부(下端莖部)에서도 흡수(吸收)는 하였으나 상위경부(上位莖部)로의 이행(移行)은 품종(品種)에 관계(關係)없이 제한적(制限的)이었다. -침지시간(沈漬時間)이 길어지면 근부흡수량(根部吸收量)도 증가(增加)되었으며, 흡수(吸收)의 지속성(持續性)은 내성품종(耐性品種)보다 감수성품종(感受性品種)에서 유의적(有意的)으로 컸다. -경엽(莖葉)에서 흡수(吸收)된 oxyfluorfen이 근부(根部)로는 쉽게 이행(移行)되는 경향(傾向)이었다. 그러나 침지시간경과(沈漬時間經過)에 따라 경엽흡수(莖葉吸收) 및 잔류량(殘留量)은 내성(耐性)보다 감수성품종(感受性品種)에서 지속적(持續的)으로 증대(增大)되는 경향(傾向)이었다.

  • PDF

황토를 이용한 친환경 유공 흡음보드의 흡음특성 (Absorption Characteristics of Perforated Environment Friendly Sound Absorbing Board using Hwangto)

  • 김선우;박현구
    • KIEAE Journal
    • /
    • 제11권1호
    • /
    • pp.3-8
    • /
    • 2011
  • Sound absorbing materials used for lightweight panels and interior material are mainly made of fibroid material such as glass wool or rock wool. However these fiber type sound absorbing materials have some problems such that sound absorption could be decreased as time goes by because of durability. In addition, dust scattering from fiber type material can cause another problem in health. In this point of view, this study aims to develop environment friendly sound absorbing material using Hwangto(so called loess or yellow soil), a traditional housing material. Hwangto is natural housing material in Korea and generally known for improving indoor air quality. Hwangto panel is made to construct on the floor, wall and ceiling, and expected that there is not enough absorption. Present study tried to develop environment friendly sound absorbing material that has high sound absorption performance with good environment performance in terms of air quality. Pore rate was designed to maximize the absorption in the specific frequency bands, and two kinds of backing space were applied in order to see the effect of backing space. As a result peak frequency that has maximum absorption is going high as the pore rate is increased. The backing space provides more absorption and makes the peak frequency down to low.

생산 방식별 재생 잔골재의 품질에 대한 기초적 연구 (A Study on the Quality Improvement of Recycled Fine Aggregates with Production Methods)

  • 심종우;이세현;유명열;이문환;송태협
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
    • /
    • pp.368-371
    • /
    • 2004
  • It analyzes the quality of the fine aggregate which is reproduced through a dry production process with cyclone and a wet production process. The conclusions of the study are as follows. 1. The recycled fine aggregate through the dry production process with cyclone shows the low rate of absorption and impurity content after the cyclone process. It shows that its density is 2.37, absorption rate is 4.8 and stability is $5.1\%$ and less. Therefore, it satisfies the standards of KS F 2573(recycled aggregate for concrete) as the first grade. 2. The recycled fine aggregate through the wet production process shows the low rate of absorption and foreign substance content after the process of wash and dehydration. It shows that its density is 2.40, absorption rate is 3.12 and stability is $3.2\%$ and less. Therefore, it satisfies the standards of KS F 2573(recycled aggregate for concrete) as the first grade.

  • PDF

Fluorouracil과 Metoclopramide 및 Propantheline.Bromide와의 병용시(倂用時) 항암효과(抗癌効果)에 관한 연구(硏究) (Combined Effect of Fluorouracil with Metoclopramide or Propantheline Bromide in Rats and Rabbits)

  • 최준식;이진환;백채선
    • Journal of Pharmaceutical Investigation
    • /
    • 제14권1호
    • /
    • pp.11-18
    • /
    • 1984
  • This paper was attempted to study on the effect of metoclopramide or propantheline on the absorption rate and bioavailability and pharmacokinetic parameter of fluorouracil in rats and rabbits. The result are as follows; Metoclopramide increased the absorption rate of fluorouracil but propantheline decreased in situ experiment with rat small intestine. Metoclopramide increased the blood level and relative bioavailability and absorption rate constant of fluorouracil in rabbits. Prolonged the peak blood level (tmax) and decreased the absorption rate constant (Ka) but did not affect the blood level and relative bioavailability of fluorouracil in rabbits. As a matter of fact, it is considerd that the coadministration of metoclopramide or propantheline is more desirable than the single administration of fluorouracil for available dosage regimen.

  • PDF

루브라참나무의 생장과 재질 - 흡수량, 흡습성 - (Wood Quality and Growth of Quercus rubra in Korea - Water absorption, Hygroscopic property -)

  • 박강식;김병로
    • 한국가구학회지
    • /
    • 제27권2호
    • /
    • pp.91-95
    • /
    • 2016
  • This study was conducted to investigate the relationship between water absorption (or hygroscopic property) and growth rate of rubra oak (Quercus rubra) from 5 different origins of seed (Carleton, Simcoe, Chatham, Bancroft, Unknown). Water absorption at cross section of Quercus rubra was $0.43{\sim}0.92g/cm^2$ and the property was not related with growth rate. Overall equilibrium moisture content of rubra oak were 11.35~11.56% and 15.15~15.83% at $40^{\circ}C$ with 75% and 90% relative humidities, respectively. There was no relationship between growth rate and moisture content(hygroscopy) in rubra oak. Based on the results, Rubra oak can be classified as a low hygroscopic wood grade, and thus might be a good raw material for furniture productions owing to its superior dimensional stability.

흡수식 냉온수기의 부분부하에 따른 냉각수 변유량시 성능특성에 관한 연구 (A Study on the Performance Characteristics of an Absorption Chiller for Variable Cooling Water Flow Rate at Partial Load Conditions)

  • 박찬우;조현철;강용태
    • 설비공학논문집
    • /
    • 제16권1호
    • /
    • pp.26-33
    • /
    • 2004
  • In general, an absorption chiller or heat pump is operated under the constant cooling water flow rate condition even though the system works with a partial load. The objective of this paper is to study the effect of the cooling water flow rates and the temperature of cooling water on the system performance to find the energy saving methode for the partial load operation of the double effect $H_2O$/LiBr absorption chiller. It is found that the performance of the system is sensitive to the temperature of cooling water than the cooling water flow rate, so the decrease of the performance due to reducing the cooling water flow rate can be overcome with the reduction of the cooling water temperature by 1$^{\circ}C$. The flow rate of the cooling water flow rate ranges from 50% to 100% of the flow rate at normal conditions with a partial load. It is also found that the operation cost of the cooling water pump and the cooling tower can be reduced by 23%.

교반셀에서 측정한 아민첨가 암모니아수 흡수제의 이산화탄소 흡수 반응 속도 측정 (Absorption Rate of Carbon Dioxide into Blended Ammonia Solution with Amine Additives in a Stirred Cell Reactor)

  • 박호석;유정균;홍원희;김종남
    • Korean Chemical Engineering Research
    • /
    • 제47권2호
    • /
    • pp.185-189
    • /
    • 2009
  • 10 wt% 암모니아수 흡수제에서 이산화탄소 흡수속도를 교반셀 반응기를 이용하여 293~337 K 범위에서 측정하였다. 암모니아 흡수제와 이산화탄소의 반응속도를 아레니우스 식으로 나타내었으며 활성화에너지는 50.42 kJ/mol였다. 2-Amino-2-methyl-1-propanol(AMP), 2-amino-2-methyl-1,3-propandiol(AMPD), 2-amino-2-ethyl-1,3-propandiol(AEPD)의 입체장애아민 첨가제가 1 wt% 함유된 흡수제에서의 이산화탄소 흡수속도를 측정하였다. 아민 첨가제들은 흡수속도에 영향을 주었으며 1 wt%의 AMP를 첨가한 경우 반응속도 상수는 약 53% 증가하였다.

Effect of the rheological properties of aqueous xanthan gum solution on chemical absorption of carbon dioxide with diisopropanolamine

  • Son, Young-Sik;Park, Sang-Wook;Park, Dae-Won;Lee, Jae-Wook
    • Korea-Australia Rheology Journal
    • /
    • 제21권2호
    • /
    • pp.109-117
    • /
    • 2009
  • Absorption rate of carbon dioxide was measured in the aqueous xanthan gum (XG) solution in the range of 0~0.15 wt% containing diisopropanolamine (DIPA) of $0{\sim}2\;kmol/m^3$ in a flat-stirred vessel with an impeller of 0.05 m and agitation speed of 50 rpm at $25^{\circ}C$ and 101.3 kPa. The volumetric liquid-side mass transfer coefficient ($k_La$) of $CO_2$, which was obtained by the measured physical absorption rate, was correlated with the viscosity and the elastic behavior of XG solution such as Deborah number as an empirical formula. The chemical absorption rate of $CO_2$ ($R_A$), which was estimated by the film theory using the measured $k_La$ and the known kinetics of reaction between $CO_2$ and DIPA, was compared with the measured rate. The aqueous XG solution with elastic property of non-Newtonian liquid made $k_La$ and $R_A$ increased compared with Newtonian liquid based on the same viscosity of the solution.

고전 자동역학 방법을 사용한 실리콘 표면위의 이온화된 Al의 물리기상증착에 관한 연구 (Classical Molecular Dynamics Study of Al lonized Physical Vapor Deposition on Silicon Surface)

  • Kang, Jeong-Won;Lee, Young-Ghik;Mun, Won-Ha;Son, Myung-Sik;Hwang, Ho-Jung
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1999년도 추계종합학술대회 논문집
    • /
    • pp.895-898
    • /
    • 1999
  • We calculated Al-Absorption, Al-reflection, and Si-etching probabilities as a function of incident angle and energy using classical molecular dynamics (MD) simulation. Variations of the cases of Al-absorption rate and Al-reflection rate are less than that of Si-etching rate. In contrast with general prediction, our simulation results showed that channeling of the <110> direction occurred the most in the case of incident angle between 30degree and 40degree. We investigated that channeling of the <110> directions quite affect Al-absorption rate in silicon. Since Si-etching rate is high and Al-absorption rate by <110> channeling is high, we found that Al ionized physical vapor deposition (PVD) on Si(001) has a different characteristics with Al ionized PVD on A1(111).

  • PDF