• 한국결정성장학회지
• /
• 제21권2호
• /
• pp.82-86
• /
• 2011

인공경량 골재는 다결정질 소성체를 주 구성으로 하므로 골재 내부에 다량의 공극이 일정비율로 형성되는 것이 특징이다. 이러한 인공경량 골재는 조직 구조의 특성상 외부환경의 변화에 의해 수분이 비정상적인 이동을 보이는 경향이 있다. 다공질 재료의 수분 방출 특성은 일반적으로 기공률 및 기공크기 분포에 크게 좌우되지만, 인공적으로 소결 제조된 경우에는 표면에 생성된 치밀한 구조의 표피층에도 많은 영향을 받을 것으로 생각된다. 인공경량 골재 내부의 수분 이동에 미치는 요인은 골재내의 세공 및 공극의 분포와 형상, 크기, 그리고 프리웨팅 방법 등이 있으며 각 조건에 따라 상당한 차이를 보인다. 본 연구에서는 인공경량 골재를 제조하여 골재의 가압시 흡수 특성이나 침수시간에 대한 흡수율의 거동에 대한 명확한 규명을 함으로써 경량골재 펌프압송을 위한 기초적 자료를 제공하고자 하였다. 본 실험에 사용된 인공경량골재는 독일 'L'사의 상업용 인공경량골재와 본 연구팀이 제조한 2가지 조성의 인공경량골재를 사용하였으며, 골재 수분함침시간, 진공압력, 급냉조건을 변화시켜 골재의 흡수율을 측정하였다. 인공경량골재를 $300^{\circ}C$ 에서 급냉 하였을 경우 24시간 침수보다 높은 흡수율을 보였고, 진공압력에 따라 흡수율이 증가하는 경향이 있으며, -300 mmHg의 진공 압력시 24시간 침수보다 "L"사 골재는 54 %의 높은 증가를 보였으나 K622와 K73 골재는 비교적 적은 2 % 내외의 흡수율 증가양상을 보였다.

• Advances in concrete construction
• /
• 제11권4호
• /
• pp.323-333
• /
• 2021

The main objective of this study is to characterize and evaluate the hydrophobic performance of polymer-based water-repellent coatings on cementitious mortar surfaces. Different concentrations of poly(vinyl acetate) (PVAc) and poly(1,4-butylene adipate) (PBA) were prepared in the laboratory and their applicability and performance was tested experimentally by water absorption test and analysis of surface contact angles of cementitious mortar specimens. According to the results of this study, it can be stated that incorporation of nano polymer particles on the surface of cementitious mortar specimens can enhance contact angles and reduce water absorption by increasing hydrophobicity. However, a dosage limit exists for polymer materials in coating, and observed hydrophobic improvements decreases when polymer dosage reached beyond the limit. Additionally, it is observed that water absorption of polymer coated cementitious mortars is closely related with the results of surface contact angle.

• 설비공학논문집
• /
• 제6권3호
• /
• pp.175-181
• /
• 1994

This paper deals with the correlation of absorption rate in absorber and evaporation rate in evaporator. The evaporator consists of a copper tube of 10mm dia, and 600mm long and chilled water flowing through the tube is fed by the chilled water circulator. The flowrate of LiBr-water solution in the absorber plays a significant role in determining the magnitude of the heat transfer rate from chilled water to refrigerant There exists a flowrate of solution which has a maximum value of heat transfer. It is interesting to note that the absorption rate of absorber increases with increasing the heat transfer rate of the evaporator. Also, absorption rate increases with evaportation rate, and the ratio(the former/the other) depends on the inlet temperature of LiBr-water solution in the absorber. The heating capacity in the absorber is higher than the refrigerating capacity in the evaporator.

• Journal of Electrical Engineering and Technology
• /
• 제7권2호
• /
• pp.230-235
• /
• 2012

Cases of insulation breakdown damage of water-cooled generator stator windings occur frequently due to coolant leakage and water absorption worldwide. Such serious accidents may cause not only enormous economic loss but also very serious grid accidents in terms of stable supply of electric power. More than 50 % of domestic generators have been operated for more than 15 years, and leak and water absorption problem of windings are often found during the planned preventive maintenance period. Since 2005, leak and water absorption tests have been performed for total watercooled stator windings after fully drying the inside of the windings. The results are then comprehensively analyzed. The result of the test performed by GE, a foreign manufacturer, for 141 generators showed failures in 80 of them (failure rate: 57 %), whereas in the tests carried out in Korean domestic power plants, only 14 out of 50 generators showed failures (failure rate: 28 %).

• Journal of the Korean Wood Science and Technology
• /
• 제34권2호
• /
• pp.10-21
• /
• 2006

Recycled polypropylene (RPP) - Wood Saw Dust (WSD) composites with and without acetylation of filler were produced at different filler loading (15%, 25%, 35% and 45% w/w) and filler size (300, 212 and $100{\mu}m$). The RPP-WSD was compounded using a Haake Rheodrive 500 twin screw compounder at $190^{\circ}C$ at 8 MPa for 30 minutes. The mechanical properties and water absorption properties of modified and unmodified WSD-PP composites were investigated. Acetylation of WSD improved the mechanical and water absorption characteristic of composites. The decrease of filler size (300 to $100{\mu}m$) of the unmodified and acetylated WSD showed increase of tensile strength and impact properties. The composites exhibited higher tensile modulus properties as the filler loading increased (15% to 45%). However tensile strength, elongation at break and impact strength showed the opposite phenomenon. Water absorption increased as the mesh number and filler loading increased. With acetylation, lower moisture absorption was observed as compared to unmodified WSD. The failure mechanism from impact fracture of the filler-matrix interface with and without acetylation was analyzed using Scanning Electron Microscope (SEM).

• Composites Research
• /
• 제21권2호
• /
• pp.8-14
• /
• 2008

섬유강화 복합재료는 수분에 의해 강도저하가 발생하며 이로 인하여 파괴가 발생하여 인적 물적 피해를 야기하고있다. 본 논문에서는 흡습에 의한 강도저하의 원인을 규명하고자 하였다. 먼저 수분이 복합재료에 흡수되는 메커니즘을 가정하였다. 흡수 메커니즘은 step 1, step 2, 그리고 step 3로 구분하였다. 이 메커니즘을 증명하기 위하여 강화섬유 및 수지의 종류, 수분이 흡수되는 시간 등의 조건을 다르게 하여 시험을 하였으며 그 결과 건조에 의해 인장강도가 회복되는 가역(reversible)반응과 건조로 인해 회복이 불가능한 비가역(irreversible)반응이 모두 작용함을 알 수 있었다. 강도저하는 흡습율 2.5% 에서 거의 완료되며, 흡습율이 4%에 이르면 비가역반응에 의한 강도저하가 많이 작용하여 강도회복이 적어지는 경향을 보였다.

• 대한기계학회논문집B
• /
• 제32권9호
• /
• pp.669-675
• /
• 2008

The objectives of this paper are to examine the effect of nano-particles on the pool type absorption heat transfer enhancement and to find the optimal conditions to design a highly effective compact absorber for ammonia/water absorption system. The effect of $Al_2O_3$ nano-particles and carbon nanotube(CNT) on the absorption performance is studied experimentally. The experimental ranges of the key parameters are 20% of ammonia concentration, $0{\sim}0.08\;vol%$ (volume fraction) of CNT particles, and $0{\sim}0.06 \;vol%$ of $Al_2O_3$ nano-particles. For the ammonia/water nanofluids, the heat transfer rate and absorption rate with 0.02 vol% $Al_2O_3$ nano-particles were found to be 29% and 18% higher than those without nano-particles, respectively. It is recommended that the concentration of 0.02 vol% of $Al_2O_3$ nano-particles be the best candidate for ammonia/water absorption performance enhancement.

• 한국태양에너지학회 논문집
• /
• 제27권4호
• /
• pp.19-26
• /
• 2007

This paper concerns the study of absorption refrigeration and heat pump cycle to use sewage. Simulation analysis on the double-effect absorption refrigeration cycle with parallel and two-stage heat pump cycle has been performed. The working fluid is Lithium Bromide and water solution. The absorption refrigeration cycle use sewage as a cooling water for the absorber and condenser, and absorption refrigeration cycle does that as a chilled water for the evaporator of the first stage cycle. And the two-stage cycle consists of coupling double-effect with parallel and single effect cycle so that the first stage absorber and condenser produces heating water to evaporate refrigerant in the evaporator of the second stage. The effects of operating variables such as a absorber temperature on the coefficient of performance have been studied for absorption refrigeration and heat pump cycle.

• 설비공학논문집
• /
• 제13권9호
• /
• pp.860-867
• /
• 2001

Absorption of water vapor into LiBr-$H_2O$ O solution flowing over a finned inclined surface is numerically investigated. The momentum, energy, and diffusion equation are numerically solved using a finite difference method. The four different shapes of the wall surfaces are considered to find the best surface for absorption assuming that the wall temperature and the surface tension are constant. The effects of the fin interval and Reynolds number are investigated. Based on the numerical results, it is known that the parabolic surface shows better absorption performance than the other surfaces, and that water vapor absorption increases gradually with decreasing the fin interval.

• 설비공학논문집
• /
• 제16권1호
• /
• pp.26-33
• /
• 2004

In general, an absorption chiller or heat pump is operated under the constant cooling water flow rate condition even though the system works with a partial load. The objective of this paper is to study the effect of the cooling water flow rates and the temperature of cooling water on the system performance to find the energy saving methode for the partial load operation of the double effect $H_2O$/LiBr absorption chiller. It is found that the performance of the system is sensitive to the temperature of cooling water than the cooling water flow rate, so the decrease of the performance due to reducing the cooling water flow rate can be overcome with the reduction of the cooling water temperature by 1$^{\circ}C$. The flow rate of the cooling water flow rate ranges from 50％ to 100％ of the flow rate at normal conditions with a partial load. It is also found that the operation cost of the cooling water pump and the cooling tower can be reduced by 23％.