• Journal of Ginseng Research
• /
• v.8 no.2
• /
• pp.75-81
• /
• 1984

The effect of the saponin fraction extracted from Panax ginseng C.A. Meyer on the absorption of ${\alpha}$-tocopherol in rat has been investigated and realized that the saponin fraction stimulated not only the absorption of ${\alpha}$-tocopherol (1.5-2 times that of control) but also its transport and excretion. ${\alpha}$-tocopherol is known to be transported mainly in the form of ${\beta}$-lipoprotein but the present study showed that the ${\alpha}$-tocopherol was transported in the form of albumin bound or micellar structure as well.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.5
• /
• pp.711-717
• /
• 1996

This study was carried to figure out the effect of washing on the cationic surfactant (DSDMAC) absorption by nylon fabrics washed with anionic surfactant(SDBS). Cationic surfactant absorption, static electricity, and fabric stiffness of washed and unwashed nylon fabrics were estimated. And to check the correlation between DSDMAC absorption and SDBS absorption, SDBS absorption by nylon fabrics were measured The results were as follows; 1. Nylon fabrics washed with SDBS absorbed more DSDMAC than unwashed fabrics. The more SDBS absorbed by nylon fabrics, the more DSDMAC absorbed. This is account for the increase in negative zeta potential of washed nylon fabrics. 2. Absorption of SDBS by nylon fabrics increased static electricity. Absorption of DSBMAC by washed and unwashed nylon fabrics greatyl decreased static electricity, and static electricity of washed nylon fabrics more decreased than that of unwashed nylon fabrics. 3. When washing cycles were under 20, DSDMAC absorption decreased fabric stiffness. As washing cycles were over 20, DSDMAC deposited as particles acted as points of weak adhesion between adjacent fibers, so increased the fabric stiffness.

• Archives of Pharmacal Research
• /
• v.17 no.5
• /
• pp.287-293
• /
• 1994

The effect of several adsorbents on paraquat poisohing was investigated (1) by measuring the saturatd amount of the poison adhered on the adsorbents in vitro and (2) by assaying the blood level of paraquat in the rat in in situ intestinal absorption experiments. Activated charcoal powder, natural aluminum silifonate) were used as adorbents. The steady-state blood level of paraquat in its absorption experiment with the cationic exchange resins was markedly lower than those without the resins or with other adsorbents. A good relationship was achieved between the calculated AUC or adsorptioin rate (in situ) and the saturated adsorption amount (in vitro). The rank order of the effect was sodium polystyene sulfonate > calcium polystyene sulfonate>natural aluminum silicate>activated charcoal powder. The effect of sodium polystyrene sulfonate after intestinal washing with physiological saline ws also measured, and a synergistic effect (marked decrease in blood paraquat level0 was found as compared with the intestinal washing alone. The simultaneous use of G.I. weshing and powerful adsorbent was scientifically proven to be most benefical.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.6
• /
• pp.792-799
• /
• 1998

Further improvement of existing $H_{2}O/LiBr$ absorption refrigeration machine is absolutely neces-sary to promote the utilization of gas-cooling system Among various methods to improve the per-formance of the absorption refrigeration machine this research has focused on the use of a new working fluid that has better properties than the existing $H_{2}O/LiBr$ working fluid. In the series of the research, $H_{2}O/LiBr+HO{(CH_{2})}_{3}OH$ system was selected as the most promisable candidate. The absorption refrigeration machine is water-cooled double-effect, $H_{2}O/LiBr+HO{(CH_{2})}_{3}OH$ sys-tem with series flow type. In this study we found out the characteristic of new working solution through the cycle simulation and compared the result with that of LiBr solution to evaluate. Theoptimum designs and operating conditions were determined based on the operating constraints and the coefficient of performance. Results demonstrate that new working fluid subsrantially increases COP by as much as 10% and has a wider working range with 8% higher crystallization limits compared to the conventional $H_{2}O/LiBr$.

• Structural Engineering and Mechanics
• /
• v.67 no.2
• /
• pp.165-173
• /
• 2018

A simple predicted model using a modified Shear-lag method was used to represent the moisture absorption effect on the stiffness degradation for $[0/90]_{2s}$ composite laminates with transverse cracks and under flexural loading. Good agreement is obtained by comparing the prediction model and experimental data published by Smith and Ogin (2000). The material properties of the composite are affected by the variation of temperature and moisture absorption. The transient and non-uniform moisture concentration distribution give rise to the transient elastic moduli of cracked composite laminates. The hygrothermal effect is taken into account to assess the changes in the normalised axial and flexural modulus due to transverse crack. The obtained results represent well the dependence of the stiffness properties degradation on the cracks density, moisture absorption and operational temperature. The composite laminate with transverse crack loaded in axial tension is more affected by the hygrothermal condition than the one under flexural loading. Through this theoretical study, we hope to contribute to the understanding of the moisture absorption on the composite materials with matrix cracking.

• Korean Journal of Metals and Materials
• /
• v.50 no.10
• /
• pp.729-734
• /
• 2012

This study investigated the effect of water absorption on the tensile properties of carbon-glass/epoxy hybrid composites at room temperature and $-30^{\circ}C$. To investigate the effect of the position of glass fabric in the hybrid composite on the tensile properties, the stacking pattern of the fiber fabrics for reinforcing was created in three different ways: (a) glass fabrics sandwiched between carbon fabrics, (b) carbon fabrics sandwiched between glass fabrics and (c) alternative layers of carbon and glass fabrics. They were manufactured by a vacuum-assisted resin transfer molding (VARTM) process. The results showed that there was surprisingly little difference in tensile strength at the two different temperatures with dry and wet conditions. However, the water absorption into the hybrid system affected the tensile properties of the hybrid composites at RT and $-30^{\circ}C$. When the glass fabrics were at the outermost layers, the hybrid composite had the lowest tensile properties. This is attributed to the fact that the composite had a relatively high water absorption rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.73-81
• /
• 2020

This study demonstrated the effect of IT Ssupports for Iintegration Ccompetency(ITSIC) on organizational performance by using organizational temperance and absorption capacity as medium. The research model was verified with Smart PLS 3.0 based on the survey conducted overa total a total of of 126 pparticipantseople's surveys for the employees. First, the ITSIC had a positive effect on both the alignment and adaptability and also on absorption capacity. Second, it was confirmed that organizational temperance hads a positive effect on absorption capacity. Third, when the organizational temperance was mediated in the relationship between ITSIC and absorption capacity, it had a indicated a positive effect. Fourth, absorption capacity had a positive impact on organizational performance. The implications of this study differ from the existing studies through by validating validation of correlations correlations by extending IT technology and organizational performance to organizational ethical factors. In addition, it has been established that the ethical factors of the organization also act as leading factors of absorption capacity. ITSIC helps managers make balanced decision-making, which can contribute to improving absorption capacity by giving members a positive perception, ultimately having a positive impact on organizational performance. It suggests the importance of building appropriate IT infrastructure and cultivating organizational virtues in order to improve the performance of organizations in which absorption capacity is essential.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.65-71
• /
• 2001

Absorbers such as porous materials and panels have limited absorption characteristics to some frequency bands. There is a need for absorbers with high absorption coefficients in a wide frequency ranges to make good response of room acoustics. This is almost impossible for a single absorption material. Composite absorption structure with cover, porous material. and air gap is known to have those wide frequency characteristics. In this basis. various composite absorption structures are measured and investigated as wide range absorption structures. Measurements are performed according to an international standard, ISO 354. Various surface types such as wooden slits, wood/steel perforated panels are selected as surface covers, and also various porous materials such as polyurethanes, polyesters, and glasswools are used inside the covers. Result shows that the area of void parts of surface materials is critical to high frequency absorptions, and thickness of air gaps are critical factor of the peak absorptions of low frequency bands.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1071-1076
• /
• 2002

The purpose of this paper is to examine sound absorption characteristics of sintered Al(aluminum) plate. Comparison between experiment and theoretical analysts by using empirical formula are made. Based on comparison. it is found that Voronina model gives more reasonable explanation for sound absorption characteristics of sintered Al plates. Effect of air gap with varying the thickness of plates are also investigated, which concludes that the air gap generally increase absorption but for too thick thickness of Al plates. Al plates with air gap shows 0.85∼0.9 of NRC(Noise Reduction Coefficient) measured in reverberation room. which is comparable to glass wool. Comparison between normal and random Incident absorption shows that random incident absorption is higher than normal incident absorption.

• The Journal of the Korea Contents Association
• /
• v.20 no.8
• /
• pp.274-284
• /
• 2020

In the era of the Fourth Industrial Revolution, the level of data-efficient utilization greatly affects the performance of the enterprise. This study was to verify the effect on organizational performance and the absorption capacity as a mediate, depending on person-job fit and person-organization fit in organizational memory affordance. According to a survey of 317 employees of large, medium and small businesses, organizations that have sufficient organizational memory have had a positive impact on both person-job fit(PJF) and person-organization fit(POF), and also on absorption capacity. In addition, the organizational memory affordance had a positive effect on absorption capacity by mediating the POF. PJF and POF had a positive effect on management performance, but only POF when mediating absorption capacity showed a positive influence relationship. This study is meaningful by comprehensively empirical analysis of the organizational IT construction environment and the members' perception of organization and job as a leading factor in absorption capacity, and simultaneously demonstrating the impact on organizational performance.