• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.2
• /
• pp.243-250
• /
• 2017

In this study, single number rating methods of sound absorption coefficients are discussed. After that the sound absorption performance of noise barriers which are classified by Korea Standard are analyzed according to several standards. The existing rating methods such as NRC (noise reduction coefficient), SAA (sound absorption average) or ${\alpha}_w$ (weighted sound absorption coefficient) from ASTM C423, KS F 3505 and ISO 11654 are introduced. The sound absorption performance of noise barrier is evaluated to compare NRC and ${\alpha}_w$ value. When the value is over 0.6 there are large variance between NRC and ${\alpha}_w$ value. As results, it is needed to unify single number rating methods of sound absorption coefficients for Korean standards on sound absorbing materials.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.6
• /
• pp.605-612
• /
• 2005

In this study, the possible use of HMDA (Hexamethylenediamine) as additive to enhance reaction between $CO_{2}$ and AMP (2-amino-2-methyl-1-propanol) which has higher absorption capacity than that of MEA (Monoethanolamine) was investigated. Also, the absorption capacity for $CO_{2}$ was compared with addition of HMDA, piperazine or MDEA (N-methyldiethanolamine) into $30\;wt\%$ AMP at $40^{circ}C$ and $CO_{2}$ partial pressure ranging from 0.5 to 120 kPa. Apparent rate constant ($K_{app}$) and absorption capacity with the addition of $5\∼20\;wt\%$ HMDA into AMP increased $214.2\∼276.3\%$ and $29.9\∼91.7\%$ than those of AMP alone. As a result, when $5\;wt\%$ HMDA added into AMP, the increasing rate of the absorption rate and the absorption capacity was found to be the highest. In addition, the absorption capacity increased $6.8\%,\;9.8\%,\;11.6\%$ with addition of MDEA, piperazine or HMDA respectively as compared to AMP alone at $CO_{2}$ partial pressure of 20 kPa. Consequently, HMDA as additive to improve absorption capacity of AMP was superior to other additives.

• Structural Engineering and Mechanics
• /
• v.66 no.6
• /
• pp.713-727
• /
• 2018

Thin-walled mental tubes under lateral crushing are desirable and reliable energy absorbers against impact or blast loads. However, the early formations of plastic hinges in the thin cylindrical wall limit the energy absorption performance. This study investigates the energy absorption performance of a simple, light and efficient energy absorber called the ring stiffened tube. Due to the increase of section modulus of tube wall and the restraining effect of the T-stiffener flange, key energy absorption parameters (peak crushing force, energy absorption and specific energy absorption) have been significantly improved against the empty tube. Its potential application in the offshore blast wall design has also been investigated. It is proposed to replace the blast wall endplates at the supports with the energy absorption devices that are made up of the ring stiffened tubes and springs. An analytical model based on beam vibration theory and virtual work theory, in which the boundary conditions at each support are simplified as a translational spring and a rotational spring, has been developed to evaluate the blast mitigation effect of the proposed design scheme. Finite element method has been applied to validate the analytical model. Comparisons of key design criterions such as panel deflection and energy absorption against the traditional design demonstrate the effectiveness of the proposed design in blast alleviation.

• Journal of the Korean Home Economics Association
• /
• v.23 no.1
• /
• pp.11-17
• /
• 1985

This paper aims to examine the variety of the absorption of cotton, T/C and hemp fabrics seperately seperaterly sized by rice, wheat, potato, corn flour and pp.V.A.. Experimental variables occurring in the concentration of sizing agents, the water content of unsized fabrics and an iron temperature show the following results, 1. When fabrics sized, the rate of absorption increases according to the order of rice, corn, pp.V.A., potato, wheat flour for cotton fabrics, of rice, corn, pp.V.A., wheat, potato flour for hemp fabrics and of the rice, pp.V.A., potato, corn, wheat flour for T/C fabrics : rice flour shows an absorption rate highest among all the others mentioned above. 2. To a certain extent, the stronger the concentration of sizing agents, the higher the rate of absorption. 3. The higher fabrics density, the higher absorption rate. 4. The structure and hydrophilic property of the sized fabrics affect the rate of absorption. 5. The fabrics with water content of 20% before sizing it shows the rate of absorption highest. 6. An iron temperature after sizing fabrics shows the rate of absorption highest at the properest at the properest one : $180^{\circ}C$ for cotton, $150^{\circ}C$ for T/C and $200^{\circ}C$ for hemp fabrics.

• Journal of computational fluids engineering
• /
• v.5 no.1
• /
• pp.33-42
• /
• 2000

The LiBr-H₂O absorption process on a horizontal tube has been analyzed numerically. The flow field, which was calculated in the authors' previous study by solving the fully elliptic Navier-Stokes equations with accurate free-surface-tracking method, is used to solve the temperature and concentration distributions in the absorption film. With the assumption that the absorbent is linear, calculations have been made for various inlet temperature and flow-rate conditions. For low inlet temperature, the absorption rate is large in the upstream region but the mean temperature also increases and as a result the absorption decreases as the film flows to downstream while high-inlet-temperature case does the opposite. The difference in the absorption rate due to the inlet temperature change becomes smaller in the downstream than that in the upstream. For large flow rate, the heat transfer to the wall becomes poor due to the thick film and so does the absorption rate. The analyses have also been carried out for multiple tube arrangement and the results show that the absorption rate converges after a few tube rows.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.2
• /
• pp.103-114
• /
• 2012

Nowadays membrane material is widely used for large indoor spaces and long spaces such as traditional market. Thermal insulation and sound field control performance is considered as a main properties for design of such buildings. In this paper sound absorption and thermal insulation properties of membrane material was investigated. Firstly, normal incidence sound absorption coefficient of 10 kinds of glass wool textiles showed that sound absorption coefficient was increased in proportion of thickness and surface density of textile. Sound absorption coefficient of 4 kinds of sound absorptive inner membrane with outer membrane was tested in the reverberation chamber. Sound absorption coefficient of mid frequency range was about 0.4 ~ 0.6. Also, sound absorption coefficient was changed by the air space behind the membrane material. Secondly, sound field control performance was investigated using mock-up space. By the installation of sound absorption membrane material, reverberation time was decreased and speech intelligibility was increased. Finally, thermal resistance and room temperature in two kinds of mock-up rooms were tested, simultaneously. Results of thermal properties showed thermal insulation properties ware increased by adding inner membrane material underneath the outer membrane.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.540-545
• /
• 2007

The performance of microturbine CHP system equipped with an absorption chiller was analyzed by modelling of a microturbine and an absorption chiller. The microturbine having recuperator was simulated by the Brayton cycle model. The mass flow rate and available heat energy of the exhaust gas from the microtubune were simulated, and this results were utilized as input values for the generator of the absorption chiller. The absorption chiller is a single-effect air cooled type having solution heat exchanger. When heat input to the generator increased, the heat transfer rate and UA of the heat exchangers of the absorption chiller proportionally increased. Besides, the COP of the absorption chiller increased with increase of the heat input to the generator under the sufficient size of the evaporator condition. When the capacity of the CHP system increased from 30 to 60 kW, the mass flow rate of the LiBr for the absorption chiller increased by two times, and UA values for evaporator and condenser were increased by 3.9 and 3.4 times, respectively, under the same COP condition.

• Proceedings of the Korean Society of Food Science and Nutrition Conference
• /
• 2004.11a
• /
• pp.47-52
• /
• 2004

This study was conducted to determine the effects of egg phospholipids [(Phosphatidylcholine (PC) and sphingomyelin (SM)] on intestinal absorption of cholesterol and other lipids. Each rat with Iymph cannula was infused via a duodenal catheter at 3.0 mL/h for 8 h with a lipid emulsion containing triolein, cholesterol and PC in 24 mL PBS. The PC in the lipid emulsion was egg PC (EPC), hydrogenated egg PC (HPC), or soy PC (SPC). The EPC in the lipid emulsion markedly lowered the Iymphatic absorption of cholesterol, compared with SPC and a lipid emulsion containing no PC. The HPC further lowered the absorption of cholesterol. The phospholipid output was not affected by the source of PC infused. The total Iymphatic output of oleic acid (18: 1), the major fatty acid infused in the form of triolein, did not differ among the NPC, SPC and EPC groups, but was significantly lower in the HPC group. The findings provide the first evidence that EPC markedly lowers the Iymphatic absorption of cholesterol under in vivo conditions. The inhibitory effect of EPC appears to be due to the higher degree of saturation of its acyl groups relative to SPC, suggesting that the intestinal absorption of egg cholesterol may be reduced by the presence of PC in e99 yolk. Experiment 2 was designed to determine whether egg SM, structurally similar to PC, also inhibits the Iymphatic absorption of cholesterol. Egg SM lowered the Lymphatic absorption of cholesterol in a dose dependent manner. Likewise, SM lowered the Iymphatic absorption of oleic acid, whereas it had no effect on retinol absorption. SM at a high dose lowered the Iymphatic outputs of both PC and SM, whereas there was no such effect at a lower dose. These results also indicate that luminal egg SM has an inhibitory effect on the intestinal absorption of cholesterol and other lipids of relatively high hydrophobicity.

• Journal of Pharmaceutical Investigation
• /
• v.25 no.1
• /
• pp.1-7
• /
• 1995

After oral administration of various drinking solutions, the initial absorption rate of water through gastrointestinal tract of the rabbits was evaluated using tritinated water $(^3H_2O)$ as a marker to develop the sports drinking beverage for Korean people. The polynomial curve fitting over 20 min was performed using computer program to obtain the initial absorption rate of water from the tangent line of the fitted equation because initial absorption rate of water was more critical compared to elimination rate during exercise. The amount of water absorbed was increased but a large variation was observed among testing preparations in a small study group $(2{\leq}n{\leq}6)$. The initial absorption rate of water from isotonic sports drinking beverages was statistically significant when compared to hypertonic cola but was not significant when compared to hypotonic solutions (potable water and barley water). In case of hypertonic sports dringking beverages (i.e. Takeda), initial absorption rate of water was not improved and efficient when compared to other isotonic sports dringking beverages. The initial absorption rate of water from prescribed isotonic sample solution containing electrolytes, carbohydrates, and vitamins was not statistically significant when compared to other isotonic drinking beverages but showed similar absorption profile. It was obvious that isotonic solutions simultaneously containing electrolytes, vitamins and carbohydrates (sugar and glucose) had a tendency to increase the initial absorption of water compared to hypotonic (potable water and barley water) and hypertonic preparations (orange juice and cola). Although statistical significance of initial absorption rate of water between isotonic sports drinking beverages and hypotonic potable and barley water was not observed, unlike the hypertonic solutions, isotonic sports drinking beverages may aid not only to replenish loss of water, electrolytes and other nutrients during the exercise but also to prevent dehydration and muscle fatigue, resulting in improved physical performance in an exhausted condition.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.1
• /
• pp.35-42
• /
• 1998

We compared absorption and adsorption rates of air pollutants by plants to eveluate the difference of absorption capacity of plant species and kinds of air pollutants, when foilage plants were exposed to $O_3$ and $SO_2$ singly and combiningly. Absorption and adsorption rates of three foliage plants exposed to $O_3$ and $SO_2$ singly and in combination varied a little according to plant species and kinds of air pollutants. But total absorption rate of Spathiphyllum patinii and Ficus benjamina was higher, and it was lower in Pachira aquatica. When exposed to $O_3$ and $SO_2$ at the same concentration, Pachira aquatica absorbed more $O_3$ than $SO_2$, in contrast to Ficus benjamina absorbing more $SO_2$. On the other hand, Spathiphyllum patinii absorbed as much $O_3$ as $SO_2$. Physiological activities were measured since absorption rates were affected by physiological characteristics of plants. Spathiphyllum patinii and Ficus benjamina showed higher photosynthetic and transpiration rates, and Pachira aquatica showed lower values. And diffusive and stomatal resistences of Pachira aquatica were higher than those of two other species. These results showed that absorption capacity was affected by the differences of physiological characteristics. Absorption capacity of air pollutants increased in plants, such as Spathiphyllum patinii and Ficus benjamina, which had high $SO_2$ absorption rate. We found that plants showing high $CO_2$ absorption rates absorb a lot of air pollutnats.