• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1727-1732
• /
• 2004

A nickel layer was deposited onto the PZT thin films, serving both as a selective radiation absorption layer and as a top electrode. The absorption properties of such nickel coated multi-layered infrared detectors were studied in the visible and infrared wavelength ranges. The optimal thickness of the nickel layer on our substrate was 10nm. The maximum absorption coefficient of the deposited 10nm thick nickel layer was 0.7 at a 632nm wavelength. However, a striking asymmetric polarization hysteresis loop was observed in these PZT thin films with nickel as the top electrode. This asymmetric polarization was attributed to the difference between the dynamic pyroelectric responses in these Ni/PZT/Pt films poled either positively or negatively before the measurement. A positively poled film showed a 40% higher voltage response than a negatively poled detector.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.517-520
• /
• 2006

The production of recycling aggregate is used to process in the crushing that recycling aggregate isn't perfect the concrete aggregate in Korea. This study is examine to the properties of recycling aggregate used method of trituration. Test item is the fineness, density and percent of absorptance, solid volume percentage of aggregate. The result is that first, the method of trituration is excellent to increase the time of trituration and steel ball but decrease washing water. Second, method of trituration is improve to the properties of recycling aggregate but aggregate of production is irregularity. And method of trituration have to study of the many test items.

• 대한설비공학회지:설비저널
• /
• 제8권2호
• /
• pp.81-88
• /
• 1979

The performance of air type solar heating system has been investigated for a system which has been operating continuously for two years. Design factors of a collector, such as the effective transmittance-absorptance and heat transfer factor were also determined experimentally. The flat plate collector is fabricated from steel sheet metal with two sealed glass covers. Solar heat is stored in a pebble bed of primarily granitic rock approximately 20-40 mm in diameter. The system is controled by automatically driven motors and dampers. The ratio of useful collected solar heat divided by the total solar radiation on the collector dropped was the range of 35 to 42 percent in monthly average. As it result, the air system was found fairly competitive with the water system, however, the heat supply from storage was limited because of using the pebble as the heat storage media.

• 생물환경조절학회지
• /
• 제20권1호
• /
• pp.8-13
• /
• 2011

본 연구는 피복재 종류에 따른 착색단고추의 생육 및 생산성에 대한 지하부 환경 요인의 영향 정도를 알아보았다. 조사 기간 동안 배양액 공급량은 플라스틱 필름온실에서는 $5,404L{\cdot}m^{-2}$로 유리온실의 $3,483L{\cdot}m^{-2}$보다 1.6배나 많았다. 그러나 배양액 흡수율은 두 온실에서 71.3~73.3%로 유사한 수준이었다. 배지 EC도 $4.17{\sim}4.23dS{\cdot}m^{-1}$ 수준으로 큰 차이를 나타내지 않았다. 정단부에서 아래로 6번째 잎의 면적은 유리온실에서 평균 $123.0cm^2$/1eaf로 플라스틱필름온실의 $119.5cm^2$/1eaf보다 다소 넓었다. 그러나 잎의 생체중, 건물중 및 건물률은 두 온실 간 뚜렷한 차이를 나타내지 않았다. 주간 생산량은 유리온실에서 $850g{\cdot}m^{-2}$로 플라스틱필름온실의 $650g{\cdot}m^{-2}$보다 1.3배정도로 많았다. 하지만 조사 기간 동안 잎의 면적 및 건물률, 그리고 생산량 모두에 대한 배지 EC와 배양액 흡수율 차이에서 오는 영향은 두 온실 간 뚜렷한 차이를 나타내지 않았다. 따라서 피복재 및 지상부 환경이 다른 온실에서 착색단고추 수경재배 시 생육 및 생산성 차이에 대한 지하부 요인의 영향은 거의 없는 것으로 판단된다.

• 한국건설관리학회논문집
• /
• 제11권6호
• /
• pp.111-121
• /
• 2010

최근 들어 도심지 보도 또는 아파트 단지내 도로 등에 시공되는 보도블록에 대한 소비자의 눈높이가 높아짐에 따라 과거에는 콘크리트 블록 일색이었던 보도포장 재료가 점토바닥벽돌, 천연석 또는 나무 등으로 다양화 고급화되고 있다. 그 중 특히 사람에게 친환경 친인간적인 점토바닥벽돌의 판매량은 해마다 두 자리수 이상의 성장률을 보일만큼 수요자가 다양하고 많아지고 있으나 시공 후 단시간 내에 '모서리 깨짐', '동결 파손', '휨파괴' 및 '줄눈 벌어짐' 등의 파손이 빈번하게 발생되고 있어 내구성 문제가 지적되고 있다. 점토바닥벽돌은 요업제품의 특성상 벽돌끼리 부딪힐 경우에는 쉽게 깨지는 특성을 가지고 있으며, 물을 쉽게 흡수하는 성질이 있어 동결로 인한 부피 팽창 파손에 비교적 취약할 뿐만 아니라 생산설비와 공정관리 등 생산과정의 미세한 차이에 따라 제품의 강도 또는 흡수율 등 물성에 대한 편차가 크게 발생한다. 그리하여 엄격한 품질관리 기준에 따라 생산과 시공을 하지 않을 경우, 제품에 하자가 발생하여 유지보수에 많은 비용이 소요된다. 본 연구에서는 점토바닥벽돌 포장에서 흔히 발생하는 파손 증상을 유형별로 분류하여 원인을 분석하였으며, 필요시 압축 강도 및 흡수율 시험 등을 통하여 벽돌의 생산, 시공 및 품질관리 기준 등 광범위한 부분에 걸쳐 해결방안을 제시하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제16권5호
• /
• pp.264-267
• /
• 2015

AlCrNO cermet films were prepared on aluminum substrates using a DC-reactive magnetron sputtering method and a water-cooled Al:Cr target. The Al₂O₃/AlCrNO (LMVF)/AlCrNO (MMVF)/AlCrNO (HMVF)/Al/substrate of the 5 multi-layers was prepared according to the Ar and (N₂ + O₂) gas-mixture rates. The Al₂O₃ of the top layer is the anti-reflection layer of triple AlCrNO (LMVF)/AlCrNO (MMVF)/AlCrNO (HMVF) layers, and an Al metal forms the infrared reflection layer. In this study, the crystallinity and surface properties of the AlCrNO thin films were estimated using X-ray diffraction (XRD) and field-emission scanning electron microscopy (FESEM), while the composition of the thin films was systematically investigated using Auger electron spectroscopy (AES). The optical properties of the wavelength spectrum were recorded using UH4150 spectrophotometry (UV-Vis-NIR) at a range of 0.3 μm to 2.5 μm.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.571-575
• /
• 2001

To examine the grinding effect through preheating of waste concrete as a way of retrieving coarse aggregates from waste concrete, the removal rates of cement mortar and paste of both recycled aggregates and heated and grinded ones were investigated. As the preheating temperature increased, the removal rate of cement mortar from waste concrete was raised, and this kind of removal hardly affected the abrasion rate and specific gravity of aggregates. On the other hand, when it was treated over 40$0^{\circ}C$ of preheating temperature, the absorptance was reduced to less than 2.17, and cement mortar was effectively separated from waste concrete. It could meet the Korean Standards on recycled aggregates for concrete, and it is expected to expand the scope of utilization by making it possible to retrieve the aggregates which have the properties close to natural aggregates.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.548-553
• /
• 2009

This study is on the application of ceramic body and art glaze by using coal ash according to each wt%. Body color was turned red and dark as increasing coal ash contents in the body and art glaze because of the effect of noncombustible carbon in $Fe_2O_3$ and coal ash. Not only pore and black core were generated but also absorptance and shrinkage were increased as increasing coal ash contents. The glaze of coal ash 20 wt% showed blue absorption band, turned red band as increasing coal ash contents, $Al_2O_3\;to\;SiO_2$ ratio got lower and became mat because glaze is estranged from $Al_2O_3\;to\;SiO_2$ mol ratio 1:10 of transparent glaze as increasing coal ash contents. Glaze showed unstable dissolving condition in the more coal ash contents.

• 보존과학연구
• /
• 통권30호
• /
• pp.125-136
• /
• 2009

Stone cultural heritages in Korea have a severe damages from chemical and biological weathering because most of them have been situated in outdoors without any suitable protection systems, and this in turn causes deformation and structural damage. To counteract these problems and increase durability, various kinds of conservation materials are used in the conservation and restoration treatments. However until now there are not many practical and technological experiments on this subject. This paper attempts quantitative evaluation of effectiveness about chemical of ethylsilicate based resin for sandstone in Yeongyang-gun. It takes a long time to evaluate durability and side effect after conservation materials treatment. So we use artificial weathering through freezing§ thawing experimental method. As a result of this experiment, porosity and absorptance increased, and elastic wave speed, elastic modules, unconfined compression strength and tensile strength decreased more than before. This study plans to make a scientific method study about weathering factor and mechanism, and to deduce correlation between artificial weathering and natural weathering.

• 한국태양에너지학회 논문집
• /
• 제35권4호
• /
• pp.9-15
• /
• 2015

Black cobalt solar selective coatings were prepared by using an electroplating method. The changes in the optical properties of the black cobalt selective coating due to thermal degradation were analyzed by using the Auger electron spectroscopy (AES) and spectrophotometer. The black cobalt selective coating was prepared on a copper substrate by using a synthesized electrolyte with $CoCl_2$ and KSCN at a current density of ${\sim}0.5A/dm^2$ for 45s ~ 60s. Its optical properties were a solar absorptance (${\alpha}$) of the order of 0.80 ~ 0.84 and a thermal emittance (${\epsilon}$) of 0.01. From the AES depth profile analysis of heated sample, thermal degradation of the black cobalt selective coating heated for 33 hours at temperature of $350^{\circ}C$ occurred primarily due to interdiffusion at interface of cobalt and copper substrate. This results were predictable that the ${\alpha}$ decreases due to the thermal oxidation and diffusion.