• 센서학회지
• /
• 제30권1호
• /
• pp.36-41
• /
• 2021

The motivation of this paper is to easily analyze the properties of nondispersive infrared gas sensor that has more than two different optical path length and to suggest the criterion and definition of infrared light absorbance in order to minimize the measurement errors. With the output voltage ratios and the normalized derivatives of infrared ray (IR) absorbance, when the normalized derivatives of IR absorbance decreases from 0.28 to 0.10, the lower and higher limits of errors were decreased from -5.62% and 2.39% to -4.27% and 2.78%. When the normalized derivatives of IR absorbance were 0.10, the output voltage could be partitioned into two regions with one exponential equation and the temperature compensation error was less than 5%.

• Applied Microscopy
• /
• 제20권2호
• /
• pp.37-45
• /
• 1990

Ultrastructural and spectrophotometric studies on mitochondrial swelling and contraction were carried out. All mitochondria just after isolated from rat liver showed condensed conformation. When mitochondria were incubated in 0.25 M sucrose only, they were moderately swollen and the absorbance at 520 nm was slightly decreased. Adding ATP to sucrose caused the absorbance to increase and the mitochondria to contract partially. KCl solution of 0.3 M induced marked decrease of absorbance and swelling of mitochondria. When ATP was added to KCl, increase of the absorbance and no contraction of the mitochondria excluding increased electron density of mitochondrial intermembranes were observed. Markedly decreased absorbance and somewhat largely swelled mitochondria in sodium arsenite solution of 0.4 or 1.0 mM were observed. When ATP was added to sodium arsenite, the absorbance increased slightly but mitochondria were more contracted than those in KCl-treated group. Above results indicate that the absorbance may not be correlated to morphological observations in the mitochondrial swelling and contraction.

• Journal of Biosystems Engineering
• /
• 제23권6호
• /
• pp.561-570
• /
• 1998

The MLR(Multiple Linear Regression) models to estimate soluble solids content non-destructively were presented to make a selection of optimal photosensor utilized to measure the soluble solids content of apples. Visible and NIR absorbance in the 400 to 2498 nanometer(nm) wavelength region, soluble solids content(sugar content), hardness, and weight were measured for 400 apples(gala). Spectrophotometer with fiber optic probe was utilized for spectrum measurement and digital refractometer was used for soluble solids content. Correlation between absorbance spectrum and soluble solids content was analyzed to pick out the optimal wavelengths and to develop corresponding prediction model by means of MLR. For the coefficient of determination($R^2$) to be over 0.92, the MLR models out of the original absorbance were built based on 7 wavelengths of 992, 904, 1096, 1032, 880, 824, 1048nm, and the ones of the second derivative absorbance based on 5 wavelengths of 784, 1056, 992, 808, 872nm. The best model of the second derivative absorbance spectrum had $R^2$=0.91, bias= -0.02bx, SEP=0.28bx for unknown samples.

• 대한화학회지
• /
• 제53권6호
• /
• pp.704-708
• /
• 2009

분광광도법으로 칼라렌즈 내 염색제에 대한 흡광도를 연구하였다. 사용된 렌즈와 염색제는 각각 CR-39 플라스틱 광학렌즈와 Ons & $Lavas^{(R)}$의 Blue 1800 이다. 칼라렌즈 내 염색제의 흡광도는 칼라렌즈와 CR-39 렌즈의 흡광도의 차를 이용하여 구하였으며, 염색제의 평균농도는 칼라렌즈와 CR-39 렌즈의 질량차로부터 구하였다. 칼라렌즈에 침투된 염색제에 대하여도 흡광도와 평균농도 사이에 Beer 법칙이 성립하였고, 검정선의 기울기로부터 흡광계수는 a=0.983 $Lg^{-1}cm^{-1}$임을 알아내었다.

• 대한금속재료학회지
• /
• 제46권11호
• /
• pp.755-761
• /
• 2008

We fabricated thermally evaporated 10 nm-Ni/1 nm-Ir/(poly)Si films to investigate the energy saving property of silicides formed by rapid thermal annealing (RTA) at the temperature range of $300{\sim}1200^{\circ}C$ for 40 seconds. Moreover, we fabricated 100 nm-thick ITO/(poly)Si films with an rf-sputter as references. A transmission electron microscope (TEM) and an X-ray diffractometer were used to determine cross-sectional microstructure and phase changes. A UV-VIS-NIR and FT-IR (Fourier transform infrared spectroscopy) were employed for near-IR and middle-IR absorbance. Through TEM analysis, we confirmed 20~65 nm-thick silicide layers formed on the single and polycrystalline silicon substrates. Ir-inserted nickel silicide on single crystalline substrate showed almost the same absorbance in near IR region as well as ITO, but Ir-inserted nickel silicide on polycrystalline substrate, which had the uniform absorbance in specific region, showed better absorbance in near IR region than ITO. The Ir-inserted nickel silicide on polycrystalline substrate particularly showed better absorbance in middle IR region than ITO. The results imply that nano-thick Ir-inserted nickel silicides may have excellent absorbing capacity in near-IR and middle-IR region.

• 약학회지
• /
• 제50권5호
• /
• pp.313-321
• /
• 2006

There are three kinds of liquid petroleum marker which is extracted by the basic or acidic, and both developer. Korean marker, Unimark 1494 DB (marker) have been spectrophotometrically analysed by the determination of absorbance at 582 nm after base extraction by Unimark 1494 DB Developer C-5 (developer). Some blue dyes which have same reactive radical of marker and can be changed deep blue color in base developer extraction (BDE), may be increased absorbance at 582 nm, but dyes or markers which can be increased the absorbance, were not unclear. In this experiment, effects of three dyes or marker such as Orimax Green 151 (the mixture of CI Solvent Yellow 16 and CI Solvent Blue 70), quinizarin and Orimax Blue 2N (CI Solvent Blue 35), and two solvent such as topasol (P-250) and lubricant (P-8) on the absorbance were studied by HITACHI Recording Spectrophotometer U-3300. It shows that all of them increased absorbance at 582 nm after BDE. Absorbance at 582 nm can be showed 0.0544 by Orimax Green 151 at the concentration of 3.96 mg/l, quinizarin at the concentration of 1.38 mg/l, and Orimax Blue 2N at the concentration of 2.73 mg/l in the artificial petroleum (normal diesel oil: topasol: lubricant=2 : 4: 4), respectively. Absorbance, 0.0544 indicates that concentration of marker is 1.64 mg/l in the reference curves, respectively. And also these results can be showed that the artificial petroleum have about 10% cheep fuel such as kerosene which have marker (16.0 mg/l). Absorbance of P-250 was 0.01361-0.22842 depending upon the purchasing date, and that of P-8 was 0.05644. pH of developer was 14.83, and so this result indicates that Unimark 1494 DB is a base extractable petroleum marker, phenylazophenol (US Patent No. 5,252,106). In the BDE, the slight color of Orimax Blue 2N, Orimax Green 151 and quinizarin in artificial petroleum changed to deep bright blue color, respectively. These result indicate that the absorbance at 582 nm by BDE may be increased not only by azo, diazo, amine and ketone (anthraquinone, coumarin) dyes or markers, but also the contaminants of P-250 and P-8 which have same as reactive radical of dyes or markers.

• 한국식품영양학회지
• /
• 제16권4호
• /
• pp.388-396
• /
• 2003

녹용각질을 protease와 염산으로 가용화시킬 수 있는 최적 조건을 조사하였다. 녹용을 5$0^{\circ}C$에서 물로 추출하고 난 각질에 세균 protease를 가하여 5$0^{\circ}C$에서 5시간 추출한 것은 32.8%(흡광도 3.61), 파파인 추출액은 23.8%(흡광도 0.94), 펜신 추출액은 31.2%(흡광도 2.96)가 녹았다. 녹용을 끓여서 추출하고 남은 각질에 세균 protease를 가하여 5$0^{\circ}C$에서 5시간 반응시킨 것은 45.0%(흡광도 3.61), 파파인 추출액은 30.4%(흡광도 0.33), 펜신 추출액은 51.2%(홉광도 2.77)가 녹았다. HPLC로 분석한 결과, 저온 물추출 각질과 열수 추출각질은 protease에 의하여 모두 분자량 1,000 이하의 펩티드로 작아졌다. 녹용 각질에 염산을 가하여 5$0^{\circ}C$에서 5시간 반응시킨 결과, 염산 0.1N농도에서 45%(흡광도 0.78), 0.2N에서 61%(흡광도 1.82), 0.4N에서는 81.0%(흡광도 2.29), 2.0N에서 82.0%(흡광도 3.28) 녹았다. HPLC로 분석한 결과, 0.8N 염산으로 추출한 것은 분자량 7만 정도의 피크가 58%였다. 녹용을 0.8N 염산으로 추출하여 동결 건조한 분말의 단백질 함량은 8.2%, 아미노산 함량은 81.6%, 회분 함량은 1.3%를 나타냈고, 무기물 함량은 Ca 0.1%, P 2.3%, Mg 0.8%, Na 3,4%, F 0,02%를 나타냈다. 녹용각질 가용화의 최적조건은 세균 pretense를 작용시켜서 5$0^{\circ}C$에서 5시간 반응시킨 다음, 0.8N 염산으로 5시간 추출하는 것이었다.

• 한국산업보건학회지
• /
• 제6권2호
• /
• pp.301-312
• /
• 1996

This study was performed to search a optimal analyzing method of cadmium in whole-blood. Cadmium was determined by graphite furnace atomic absorption spectrometry(GFAAS). We investigated the effect of ashing temperature on the absorbance of cadmium in a simple dilution(ten-fold) method with triton X-100 and matrix modifier methods treated with $NH_4H_2PO_4$(1 and 3%) and $Pd(NO_3)_2$(0.00l and 0.005%) as matrix modifier. We also compared the reported reference values of standard blood with values resulted from optimal analyzing conditions of this study. In case of a simple dilution method, when ashing temperature was set at $450^{\circ}C$, the absorbance of sample and background were $0.334{\pm}0.012$ and $1.382{\pm}0.245$, respectively. Background level was higher than the value(0.8) that can be corrected by $D_2$ background correction method. As ashing temperature was rised to $500^{\circ}C$, the absorbance of sample and background were $0.178{\pm}0.008$ and $0.711{\pm}0.223$ respectively. The higher ashing temperature($450^{\circ}C-650^{\circ}C$) was, the lower the absorbance of sample was. In case of a matrix modifier method with $NH_4H_2PO_4$(1 and 3%), when ashing temperature was rised from $500^{\circ}C$ to $650^{\circ}C$, the absorbance of sample slightly changed. The absorbances of sample at $600^{\circ}C$ were $0.230{\pm}0.017$ and $0.137{\pm}0.012$, respectively. These values were larger than that of simple dilution method. But the absorbance of background was higher than the level that can be corrected by $D_2$ method. In case of a matrix modifier method with $Pd(NO_3)_2$(0.001 and 0.005%), the absorbance of sample and background were higher than those of other methods and were stable and reproducible. When ashing temperature was over $550^{\circ}C$, the absorbance of sample was significantly decreased. In case of 0.005% $Pd(NO_3)_2$ carbon residue remained in graphite tube affected the absorbance of sample and background. From these results, We propose that in case of a simple dilution(ten-fold) method with triton X-100 ashing temperature must be maintained below $400^{\circ}C$. In order to diminish the absorbance of background, the alternative method is attenuation of injection volume or multiplication of dilution ratio. We recommend $Pd(NO_3)_2$ than $NH_4H_2PO_4$ as a matrix modifier. In case of a matrix modifier method with $Pd(NO_3)_2$ ashing temperature might be maintained below $550^{\circ}C$.

• 한국식품영양학회지
• /
• 제17권2호
• /
• pp.147-155
• /
• 2004

동결건조 녹용, 열건조 녹용, 녹각을 물, pretense, 염산으로 단계적으로 추출하였다. 5$0^{\circ}C$ 물로 추출한 경우 동결건조 녹용은 9.01%(흡광도 8.82), 열건조 녹용은 9.01%(흡광도 4.45), 녹각은 1.10%(흡광도 0.31)의 추출율을 나타냈고, 세균 protease로 추출한 경우는 동결건조녹용은 16.89%(흡광도 4.50), 열건조 녹용은 17.20%(흡광도 5.62), 녹각은 18.22%(흡광도 0.64)의 추출율을 나타냈고, 0.8N 염산으로 추출한 경우는 동결건조 녹용은 72.25%(흡광도 4.60), 열건조 녹용은 71.1%(흡광도 4.70), 녹각은 79.82%(흡광도 2.80)의 추출율을 나타냈다. 이들 삼단계 과정으로 동결건조 녹용은 98.15%, 열건조 녹용은 97.35%, 녹각은 99.14% 추출되었다. HPLC로 분석한 결과, 녹용 및 녹각추출물에서 나타나는 고분자 피크는 단백질 가수분해 효소의 작용으로 분자량 1,000 정도의 작은 피크로 분해되었고 남은 각질은 0.8 N염산에 의하여 분자량 7만 정도의 단백질이 추출되었다. 이상의 결과로부터 동결 건조녹용의 추출에는 물과 protease에 의한 추출, 열건조 녹용의 추출에는 protease와 염산에 의한 추출, 녹각의 추출에는 염산에 의한 추출이 효과적이었다.

• 한국재료학회지
• /
• 제17권6호
• /
• pp.323-330
• /
• 2007

We fabricated thermaly evaporated 10 nmNi/(poly)Si films to investigate the energy saving property of silicides formed by rapid thermal annealing (RTA) at the temperature of $300{\sim}1200^{\circ}C$ for 40 seconds. Moreover, we fabricated $10{\sim}50$ nm-thick ITO/Si films with a rf-sputter as reference films. A four-point tester was used to investigate the sheet resistance. A transmission electron microscope (TEM) and an X-ray diffractometer were used for the determination of cross sectional microstructure and phase changes. A UV-VISNIR and FT-IR (Fourier transform infrared rays spectroscopy) were employed for near-IR and middle-IR absorbance. Through TEM analysis, we confirmed $20{\sim}70nm-thick$ silicide layers formed on the single and polycrystalline silicon substrates. Nickel silicides and ITO films on the single silicon substrates showed almost similar absorbance in near-IR region, while nickel silicides on polycrystalline silicon substrate showed superior absorbance above 850 nm near-IR region to ITO films. Nickel silicide on polycrystalline substrate also showed better absorbance in middle IR region than ITO. Our result implies that nano-thick nickel silicides may have exellent absorbing capacity in near-IR and middle-IR region.