• Asian Journal of Atmospheric Environment
• /
• v.9 no.1
• /
• pp.66-77
• /
• 2015

In order to survey the seasonal variation of the chemical composition of particulate matter of $2.5{\mu}m$ or less ($PM_{2.5}$), $PM_{2.5}$ was sampled from 8 February 2013 to 31 March 2014 in an industrial area of Chiba Prefecture, Japan. Chemical measurements of the sample included: ionic components ($Na^+$, $NH_4{^+}$, $Ca^{2+}$, $Mg^{2+}$, $K^+$, $Cl^-$, $NO_3{^-}$ and $SO_4{^{2-}}$), carbonaceous components - organic carbon (OC) and elemental carbon (EC), and water-soluble organic carbon (WSOC). Also, secondary organic carbon (SOC) was measured based using the EC tracer method, and char-EC and soot-EC were calculated from the analytical results. The data obtained were interpreted in terms of temporal variation. Of the overall mean value of $PM_{2.5}$ mass concentration obtained during the study period, ionic components, OC and EC accounted for 45.3%, 19.7%, and 8.0%, respectively. $NO_3{^-}$ showed a unique seasonal distribution pattern due to a dependence on temperature and absolute humidity. It was estimated that an approximate temperature of $14^{\circ}C$, and absolute humidity of $7g/m^3$ were critical for the reversible reaction of $NH_4NO_3(p){\leftrightharpoons}NH_3(g)+HNO_3(g)$. The amount of OC and EC contributing to the monthly $PM_{2.5}$ mass concentration was higher in autumn and winter compared to spring and summer. This result could be attributed to the impact of burning biomass, since WSOC and the ratio of char-EC/soot-EC showed a similar pattern during the corresponding period. From the comparison of monthly WSOC/OC values, a maximum ratio of 83% was obtained in August (summer). The WSOC and estimated SOC levels derived from the EC tracer method correlated (R=0.77) in summer. The high occurrence of WSOC during summer was mainly due to the formation of SOC by photochemical reactions. Through long-term observation of $PM_{2.5}$ chemical components, we established that the degree to which the above-mentioned factors influence $PM_{2.5}$ composition, fluctuates with seasonal changes.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.19
• /
• pp.33-66
• /
• 2003

This is a comparative and analytical study which comprises of the analysis of the rules of the buyer's remedies where the seller delivers defective goods of four legal systems; Directive, CISG, English law and Korean law. In light of threefold main purposes of this study, it firstly attempts to describe and analyze the remedy provisions of Directive in a comparative way in order to provide legal advice to the sellers who plans to enter into English consumer markets. It shows that the two tier remedial system under Directive is not much different from the other jurisdictions, except where the right of rescission under Directive is absolute in a sense that it does not require a certain degree of seriousness of defect. Secondly, the study compares the rules of one jurisdiction with those of other jurisdictions and evaluates the rules in light of the discipline of comparative law the basic question of which is whether a solution from one jurisdiction may facilitate the systematic development and reform of another jurisdiction. It proves the followings; (1) the reluctance and uncertainty in English law of ordering specific performance based on the discretionary power does not reflect the parties' preference because the order is either uncertain or rather negative where the purchase of substitute goods elsewhere is not a satisfactory solution in many cases; (2) the position in Korean law which has no limitation on the right to require substitute goods is likely unfair in commercial sales, but justified in consumer sales; (3) the right of termination or reduction under Directive which is subject to the applicability of the right to require repair or substitute goods seems to be contrary to the consumer's preference where the defective delivery destroys the basis of trust in the quality of the seller's performance; (4) the absolute right of termination under Directive and English law seems crucial in consumer sales because they are often inferior to commercial sellers in terms of information and bargaining power; (5) the right of reduction as a self-help remedy which is absent in English law emphasizes its usefulness. Thirdly, it finds that, where CISG is deemed to fail to unify different rules on the right to require specific performance between Civil and Common law, it is attempted once again in Directive and notwithstanding their hostility to awarding the right to require specific performance in English law, Regulations 2002 expressively stipulates such right.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.5
• /
• pp.388-396
• /
• 2003

In this paper, a fast motion search algorithm that performs motion search for variable blocks in integer pixel unit is proposed. The proposed method is based on the successive elimination algorithm (SEA) using sum norms to find the best estimate of motion vector and obtains the best estimate of the motion vectors of blocks, including 16${\times}$8, 8${\times}$16, and 8${\times}$8, by searching eight pixels around the best motion vector of 16${\times}$16 block obtained from all candidates. And the motion vectors of blocks, including 8${\times}$4, 4${\times}$8, and 4${\times}$4, is obtained by searching eight pixels around the best motion vector of 8${\times}$8 block. The proposed motion search is applied to the H.264 encoder that performs variable blocks motion estimation (ME). In terms of computational complexity, the proposed search algorithm for motion estimation (ME) calculates motion vectors in about 23.8 times speed compared with the spiral full search without early termination and 4.6 times speed compared with the motion estimation method using hierarchical sum of absolute difference (SAD) of 4${\times}$4 blocks, while it shows 0.1dB∼0.4dB peak signal-to-noise ratio (PSNR) drop in comparison to the spiral full search.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.3
• /
• pp.237-246
• /
• 1995

Larvae of the freshwater shrimp, Macrobrachium nipponense were reared in the laboratory at constant condition $(25^{\circ}C,\;7\%o)$, and their feeding rate, oxygen consumption rate, and growth rate were measured in regular intervals of time during larval development. Regression equations describing rates of feeding, growth and respiration as functions of time during individual larval molt cycles were inserted in a simulation model in order to analyse time-dependent patterns of variation as well as in bioenergetic efficiencies. Absolute values for feeding, growth, respiration and assimilation showed clear changes during the molt cycle, The absolute and specific values of respiration (R: R/C) showed small variation during the individual molt cycles. Significance of respiration in relation to growth (G) increased within the carbon budget, respiration rate (R/C) outbalanced growth rate (G/C) in late premolt. When the portion of metabolizable carbon is respired (R/G), metabolic coefficient was < 1 (i.e. R$(K_2)$ decreased concurrently, In cumulative carbon budget, total feeding was $491.54\;{\mu}g$ C/ind., assimilation was $85.3\%$, respiration was $47.7\%$, and growth was $37.6\%$ from hatching to postlarval stage.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.2
• /
• pp.107-113
• /
• 2011

To evaluate the performance of the hydrodynamic model, we introduced 10 skill assessments that are assorted by two groups: quantitative skill assessments (Absolute Average Error or AAE, Root Mean Squared Error or RMSE, Relative Absolute Average Error or RAAE, Percentage Model Error or PME) and qualitative skill assessments (Correlation Coefficient or CC, Reliability Index or RI, Index of Agreement or IA, Modeling Efficiency or MEF, Cost Function or CF, Coefficient of Residual Mass or CRM). These skill assessments were applied and calculated to evaluate the hydrodynamic modeling at one of Florida estuaries for water level, current, and salinity as comparing measured and simulated values. We found that AAE, RMSE, RAAE, CC, IA, MEF, CF, and CRM are suitable for the error assessment of water level and current, and AAE, RMSE, RAAE, PME, CC, RI, IA, CF, and CRM are good at the salinity error assessment. Quantitative and qualitative skill assessments showed the similar trend in terms of the classification for good and bad performance of model. Furthermore, this paper suggested the criteria of the "good" model performance for water level, current, and salinity. The criteria are RAAE < 10%, CC > 0.95, IA > 0.98, MEF > 0.93, CF < 0.21 for water level, RAAE < 20%, CC > 0.7, IA > 0.8, MEF > 0.5, CF < 0.5 for current, and RAAE < 10%, PME < 10%, CC > 0.9, RI < 1.15, CF < 0.1 for salinity.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.4
• /
• pp.55-61
• /
• 2010

This paper is concerned with an experimental research to random vibration control caused by external loads specially in bridges which tend to be structurally flexible. Experimenting on a reduced structure modelled on Seohae Grand Bridge, we inflicted a reduced form of El-centro wave on the model structure to a proper proportion. On the center of its middle span, we placed a shear type MR damper which was to control its vibration and also acquire its structural responses such as displacement and acceleration at the same site. The experiments concerning controlling vibration were performed according to a variety of theories including un-control, passive on/off control, and Lyapunov stability theory. Its control performance was evaluated in terms of the peak absolute displacements, the peak absolute accelerations and the total power required to control the bridge which differ from each different experiment method. Among all the methods applied in this paper, case of Lyapunov control method turned out to be the most effective to reduces of displacement and acceleration. Also, this method could to decrease consuming of external power for vibration control. Finally, it was noteworthy that Lyapunov control method was specially effective in the vibration control employing a semi-active damper such MR damper.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.1
• /
• pp.85-94
• /
• 2011

This paper is concerned to constitute a semi-active realtime feedback vibration control system and evaluate it through experiments in order to control in realtime the vibration externally generated, specially on the bridges which is structurally flexible. For the experiment of vibration control, we built a model bridge structure of Seohae Grand Bridge in a 1/200 reduced form and inflicted El-centro wave on the model structure also in a reduced force considering the lab condition. The externally excited vibration was to be controled by placing a shear type MR damper vertically on the center of bridge span, and the response (displacement and acceleration) of structure was to be acquired by placing LVDT and Accelerometer at the same time. As for the experiment concerning controlling vibration, a realtime feedback vibration control experiments were performed under each different condition largely such as un-control, passive on/off control, Lyapunov stability theory control, and Clipped-optimal control. Its control performance under different condition was quantitatively evaluated in terms of the peak absolute displacements, the peak absolute accelerations and the power required for control on the center of span. The results of experiments proved that the Lyapunov control and clipped-iptimal control were effective to decrease the displacement and acceleration of the structure, and also to decrease the power consumption to a great extent. Finally, the semi-active realtime feedback vibration control system constituted in this research was proven to be an effective way to control and manage the vibration generated on bridge structure.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.3
• /
• pp.30-43
• /
• 2017

The purpose of this study is to improve the usefulness of photogrammetry in the field of cultural heritage recording concentrated on laser scanning. Two measurement methods(laser scanning, photogrammetry) were compared in terms of accuracy and reality for the Rock-carved Standing Buddha in Singyeong-ri, Hongseong. With regard to accuracy, the distances of major points by both shape information and between the two shape information were compared. Only a deviation of about 1mm was found in the distance measurement of the major points by both shape information. In particular, the average distance between two shape information identified through aligning was only about 0.01mm. Also, the absolute deviation within about 2mm accounted for 70% of the total, and the absolute deviation within about 3.5mm was found to be 95.4% of the total. These values showed very high similarity between laser scanning and photogrammetry-based shape information. In respect of reality, the carved depth, texture, and patterns were compared. As a result of comparing four cross-sectional shapes, only slight differences were found in the shape information of both measurement techniques and similar shapes were identified. The overall texture of both shape information was also similar. However, the detailed shape based on the photogrammetry with decimation is realized with a smoother texture than the original and laser scanning. In particular, Photogrammetry also realistically expressed the various ornaments carved in the Rock-carved Buddha and the patterns with shallow depths were comparatively detailed.

• Journal of Intelligence and Information Systems
• /
• v.28 no.2
• /
• pp.263-278
• /
• 2022

With the recent advent of IoT technology, automatic pet feeders are being distributed so that owners can feed their companion animals while they are out. However, due to behaviors of pets, the method of measuring weight, which is important in automatic feeding, can be easily damaged and broken when using the scale. The 3D camera method has disadvantages due to its cost, and the 2D camera method has relatively poor accuracy when compared to 3D camera method. Hence, the purpose of this study is to propose a deep learning approach that can accurately estimate weight while simply using a 2D camera. For this, various convolutional neural networks were used, and among them, the ResNet101-based model showed the best performance: an average absolute error of 3.06 grams and an average absolute ratio error of 3.40%, which could be used commercially in terms of technical and financial viability. The result of this study can be useful for the practitioners to predict the weight of a standardized object such as feed only through an easy 2D image.

• Journal of Venture Innovation
• /
• v.5 no.4
• /
• pp.179-189
• /
• 2022

In the face of revolutionary changes in industry, the relationship between labor and income needs to be reconceptualized in the period of social revolution. The absolute decrease in labor due to the absence of labor is caused by automation, smartization, AI, robot labor, etc., which we must accept whether we want to or not. However, while gross social product and capital of the state or society increase, individual income is likely to decrease. During this transformation period, the state or politics must prepare for the problems caused by the decline in individual income. Until now, there have been various levels of discussion on social welfare or social security from the perspective of welfare or assistance. Attempts or studies at the experimental level have been conducted at the level of many countries or local governments and have found positive and negative effects. There is no basic income system that is widely implemented at the national level, and various discussions are taking place from a future-oriented perspective. Therefore, I propose to look at it from a new perspective based on the perspective so far. We explored that it is part of a positive approach to examine the importance and necessity of basic income in terms of working hours, quality of labor, income, quality of life, value of spare time, and work-life balance. The goal is to actively accept the absolute lack of working hours, replacement of mechanical labor, and polarization due to changes in the industry paradigm, and to look at the problems that come from a positive perspective. If we are going to accept it anyway, we should not look at these issues as short-sighted, but prepare them preemptively and establish a primitive plan from a long-term and overall perspective. Smartphones have changed the world over the past decade and have been lost, but wouldn't there be a lot of new discoveries? Shouldn't we think of it as a great opportunity to improve the quality of life through technological changes?