• 터널과지하공간
• /
• 제22권4호
• /
• pp.284-295
• /
• 2012

본 연구에서는 암석 절삭 장비의 마모에 직접적인 영향을 주는 인자인 암석의 마모도(abrasiveness) 측정에 관한 연구를 수행하였다. 몇 가지 방법 중 세르샤 마모 시험(Cerchar abrasiveness test)을 통하여 암석의 마모도에 영향을 미치는 인자를 확인하고 효율적인 시험을 수행하기 위한 조건들을 연구하였다. 국내 19종 암석에 대한 시험 결과를 통하여, 세르샤 마모 지수(CAI, Cerchar Abrasiveness Index)에 영향을 미치는 암석의 역학적 물성(단축압축강도, 간접인장강도, 탄성계수, 포아송비, 공극률, 쇼어경도)과의 상관관계를 찾아보았고 X선 회절 분석을 통하여 암석의 구성 광물 중 마모도에 가장 큰 영향을 미치는 석영 함량, 등가 석영 함량과의 관계도 확인하였다. 그 결과로 암석의 입자 결합 특성보다 광물의 특성이 CAI에 영향을 더 미치는 것으로 관찰되었고, 단축압축강도와 등가 석영함량의 함수로 CAI를 예측하는 모델을 제시하였으며 핀의 경도가 커질수록 CAI값이 선형적으로 작아짐을 확인하였다. 수치해석적 연구를 통해 세르샤 마모 시험을 모사한 결과 초기 긁힘 거리에서 대부분의 마모가 발생함을 확인하였고 하중이 증가할수록 CAI값이 증가함을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.153-160
• /
• 2006

Tunnel type spillway is rarely constructed in worldwide, and designed secondary in Korea. In this paper we pronounce a case study of tunnel type spillway design. We firstly considered lining concrete abrasiveness and cavitations for tunnel safety. This paper describes the design of tunnel type spillway section, excavation method, blasting, support and concrete lining.

• Geomechanics and Engineering
• /
• 제17권6호
• /
• pp.527-534
• /
• 2019

There have been developed a number of methods to assess the abrasivity of rock materials with the increased use of mechanized rock excavation. These methods range from determination of abrasive and hard mineral content using petrographic thin section analysis to weight loss or development of wear flat on a specified cutting tool. The Cerchar abrasivity index (CAI) test has been widely accepted for the assessment of rock abrasiveness. This test has been considered to provide a reliable indication of rock abrasiveness for isotropic rocks. However, a great amount of rocks in nature are anisotropic. Hence, viability assessment of Cerchar abrasivity test for the anisotropic rocks is investigated in this research. The relationship between CAI value and quartz content for the isotropic rocks is well known in literature. However, a correlation between EQ, F-Schimazek value, Rock Abrasivity Index (RAI) and CAI of anisotropic rocks such as phyllite was done first time in literature with this research. The results obtained with this research show F-Schimazek values and RAI values should be considered when determination of the abrasivity of anisotropic rocks instead of just using Cerchar scratch test.

• Geomechanics and Engineering
• /
• 제29권3호
• /
• pp.219-228
• /
• 2022

The most widely used parameter to represent rock abrasiveness is the Cerchar abrasivity index (CAI). The CAI value can be applied to predict wear in TBM cutters. It has been extensively demonstrated that the CAI is affected significantly by cementation degree, strength, and amount of abrasive minerals, i.e., the quartz content or equivalent quartz content in rocks. The relationship between the properties of rocks and the CAI is investigated in this study. A database comprising 223 observations that includes rock types, uniaxial compressive strengths, Brazilian tensile strengths, equivalent quartz contents, quartz contents, brittleness indices, and CAIs is constructed. A linear model is developed by selecting independent variables while considering multicollinearity after performing multiple regression analyses. Machine learning-based regression methods including support vector regression, regression tree regression, k-nearest neighbors regression, random forest regression, and artificial neural network regression are used in addition to multiple linear regression. The results of the random forest regression model show that it yields the best prediction performance.

• 대한치과보철학회지
• /
• 제39권1호
• /
• pp.96-104
• /
• 2001

This study was performed to compare the abrasiveness and wear resistance of several restorative materials occluding enamel and gold alloy. Intact labial surface of bovine incisor and the plain portion of type III gold alloy were used as plate specimens, and pin specimens were fabricated using $Artglass^{(R)},\;Targis^{(R)},\;Sculpture^{(R)}$. After two-body wear test using pin and plate model, amount of vertical height loss of plate and pin specimens were measured and statically analyzed. The amount of vertical height loss of plate specimens against pin specimens were measured by a roughness measurement instrument. The amount of vertical height loss of pin specimens against plate specimens were measured by an image analyzing program after taking scanning electron micrographs of pin specimens. The results were as following. 1. As fir the amount of enamel wear. gold group showed least amount of wear. There was no significant difference among Sculpture, Targis and Artglass groups(p<0.05). 2. As for the amount of gold wear Sculpture group standed first and Targis and Artglass group followed respectively, and there was significant difference between Sculpture and Artglass groups(p<0.05). 3. As for the amount of restorative materials against enamel, Artglass group showed greatest, and there was no significant difference among gold. Sculpture, Targis groups(p<0.05). 4. As for the amount of restorative materials against gold, Artglass group standed first and Targis and Sculpture group followed respectively, and there was significant difference among each groups(p<0.05).

• 한국터널지하공간학회 논문집
• /
• 제16권6호
• /
• pp.533-542
• /
• 2014

본 연구에서는 Gehring, CSM, NTNU 모델을 이용한 디스크 커터 수명 예측 방법과 각 모델이 가지는 특징을 살펴보았다. 디스크 커터 수명에 크게 영향을 주는 요소인 관입깊이, 암석의 일축압축강도, 마모지수의 변화가 각각의 예측 모델들에 미치는 영향을 분석하였다. 디스크 커터 수명은 1회전당 관입깊이에 선형적으로 증가하였고, 일축압축강도의 증가에 따라 감소하는 경향을 보였다. 마모지수인 CAI 값이 증가함에 따라 Gehring과 CSM 모델에서의 디스크 커터 수명은 감소하였으나, CLI 값이 증가할수록 NTNU 모델의 디스크 커터 수명은 증가하는 경향을 보였다. 그리고 실제 현장 자료를 이용하여 디스크 커터 수명을 상호 비교하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.22-27
• /
• 2002

The existing compressor steel seal used in automotive air-conditioner has the problem of oil leakage and the deterioration in shielding performance, due to the abrasion and the corrosion of the material. A new type of polymer resin seal is studied in the research. The polymer resin seal has the characteristics of high anti-abrasiveness and anti-corrosiveness, which can overcome the deflects of the steel seal. In addition, the seal needs lower manufacturing cost and is appropriate to mass production, because it is made by the injection molding method requiring no mechanical processing. The profile generation program for seal mold has been developed using the gradient method, and the molding characteristics of the seal have analyzed through the flow analysis and the warpage analysis. The program has been verified by comparing the analysis results with the measured data of the test product. The research might be said to provide the basic method to produce the polymer resin seals with various types and dimensions.

• 대한치과의사협회지
• /
• 제22권10호통권185호
• /
• pp.855-860
• /
• 1984

국산 세치제와 잇솔이 갖추어야 할 기본요건과 개발방향이 제시된 세미나가 지난해에 이어, 지난 7월 14~15일 양일간에 걸쳐 속리산 관광호텔에서 구강보건학계와 럭키ㆍ부광ㆍ태평양등 국내 3대 세치제 제조회사의 52명이 참석한 가운데 서울치대 예방치학교실 주최로 개최되었다. 총 13개 연제가 발표된 이번 세미나에서는, 국민 복지를 빨리 증진시키기 위하여, 기업간의 건전한 경쟁을 유도하고, 기술개발을 촉진하며, 국산품의 품질 개선, 가격인하, 국제경쟁력의 신장등, 정부의 기본방향을 재확인하는 동시에 거시적이고 원시적인 안목으로 볼때 기술개발을 위한 산학활동과 선업간의 협력은 산업발전을 통하여 국민복지 증진에 분명히 기여할 수 있음을 강조한 서울치대 김종배교수의 주제 발표와 세치제의 주요작용, 세치제의 abrasiveness 및 polishing 효과와 용어의 정의, 개인에 적합한 세치제의 선택방법, Monofluorophosphate와 plaque 및 타액의 상호작용, 세치제의 선호변인 분석, 세치제 광고문안상의 문제점, 세치제의 전망, 세치제의 전망, 세치제 개발의 제요소, 세치제의 검정 기준과 과정, 잇솔의 기본요건과 시판잇솔의 규격, 잇솔의 강모형태와 탄력성에 관한 이론적 고찰, 개인에 적합한 강모강도를 가진 잇솔의 선택방법, 「A study on the F'ion concentration of commercial dentifrices」에 대해 폭넓고 진지한 토의가 있었다. 다음은 이날 발표된 내용을 요약정리한 것이다.

• 한국공작기계학회논문집
• /
• 제11권5호
• /
• pp.81-87
• /
• 2002

The existing compressor steel seal used in automotive air-conditioner has the problem of oil leakage and deterioration in shielding performance, due to the abrasion and corrosion of the material. A new type of polymer resin seal studied in this research has the characteristics of high anti-abrasiveness and anti-corrosiveness, which can oversome the defects of the steel seal. In addition, the seal needs lower manufacturing cost and is appropriate to mass production, because it is made by the injection molding method requiring no mechanical processing. The profile generation program for seal mold has been developed using the gradient method, and the molding characteristics of the seal have analyzed through the flow analysis and the warpage analysis. The program has been verified by comparing the analysis results with the measured data of the test product. The research might be said to provide the basic method to produce the polymer resin seals with various types and dimensions.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.579-579
• /
• 2001

One of the most important factors for the clinical success of adhesive posterior restorations is marginal adaptation. This property is very closely related to mechanical properties and to the shrinkage behavior of composite materials. Most of modem composite materials are light-cured. This is why the first part of this lecture will be confined to our recent research on light curing, such as plasma polymerization, LED polymerization and the power of modem halogen lamps. In the second part of the lecture the shrinkage properties such as dimensional shrinkage and shrinkage forces of different light curing materials and during different curing procedures will be discussed. Finally, in the third part of the lecture, marginal adaptation before and after loading in different cavity classes and by using different restorative techniques and curing procedures will be presented. Data will also be given on wear resistance, abrasiveness against opposing cusps and postcuring of composite materials.(omitted)