• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.657-660
• /
• 2001

In this paper, a robust watermarking technique is presented by using a block-based statistics in DCT domain. First, the proposed technique calculates JND threshold value using the global statistics in DCT domain. Then watermark insertion is carried out by inserting one watermark into coefficients which are above the threshold value J within a 2${\times}$2 block. Finally, watermark is estimated by averaging the extracted watermarks from the coefficients which are above the threshold in a window. In experiments it is shown that the proposed techniques can enhance perceptual invisibility and robustness against additive noise and JPEG compression attacks by using the characteristics of JND.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.7 no.2
• /
• pp.55-58
• /
• 1982

An useful method for evaluating the threshold of the optimum detector can be used if sufficient statistics exists. This was done by giving examples. The design of the suboptimum detector can be carried out by finding the threshold of the appropriate test statistics. The results are conformed with the existing theory and the method given above is applicable in extensive area of designing the detectors.

• International Journal of Highway Engineering
• /
• v.17 no.1
• /
• pp.129-142
• /
• 2015

PURPOSES : The purpose of this study is to suggest a basis for setting appropriate safety goals specifically related to the threshold zone luminance in a vehicular traffic tunnel. METHODS : In the test, drivers were divided into two groups. One group consisted of all drivers (average drivers) group with an age ratio of drivers holding domestic driver's license and driver group by age to produce threshold zone luminance in the tunnel. The threshold zone luminance produced as a result was used to analyze how it affects the safety level of each driver group and provide a basis for setting an appropriate safety criterion that can be used to determine threshold zone luminance. We used test equipment, test conditions, and ananalysis of threshold zone luminance identical to that reported by ChoandJung(2014) but the values of adaptation luminance in our analys is were expanded to range from100 to $10,000cd/m^2$. RESULTS : Adaptation luminance and threshold zone luminance are found to be related by a quadratic function. The threshold zone luminance needed by older drivers to ensure a certain safety level is significantly higher than that for drivers of other age brackets when adaptation luminance increases. 56% of older drivers are at an increased risk of an accident at the same luminance for which the safety level of average drivers is 75%. The safety level that can be achieved for older drivers increases to above 60% when threshold zone luminance level is set with the goal of attaining a safety level of more than 85% for average drivers. The safety level that can be attained for average drivers is above 90% when the threshold zone luminance is high enough to ensure over 75% in the safety level of older drivers. Results of this study are applicable to highways and others whose designed speed is 100 km/h. CONCLUSIONS : Threshold zone luminance determined on the basis of drivers having average visual ability is of limited value as a performance standard for ensuring the safety of older drivers. Hence, safety level for older drivers should be considered separately from safety levels for drivers with an average ability to avoid risk. Upward adjustment of older drivers' safety level in the process of determining appropriate threshold zone luminance in a vehicular traffic tunnel may bring both tangible and intangible benefit as a result of reducing accidents. However, there is an associated dollar cost arising from installing and operating lights. As a result, the economic impact of these trade-offs should also be considered.

• Electrical & Electronic Materials
• /
• v.9 no.8
• /
• pp.813-818
• /
• 1996

Amorphous As$_{10}$Ge$_{15}$ Te$_{75}$ device shows the memory switching characteristics under d.c. bias. In bulk material, a-As$_{10}$Ge$_{15}$ Te$_{75}$ switching threshold voltage (V$_{th}$) is very high (above 100 volts), but in the case of thin film, V$_{th}$ decreases to a few or ten a few volts. The characteristics of V$_{th}$ depends on the physical dimensions such as the thickness of thin film and the separation between d.c. electrodes, and the annealing conditions. The switching threshold voltage decreases exponentially with increasing annealing temperature and annealing time, but increases linearly with the thickness of thin film and exponentially with increasing the separation between d.c. electrodes. The desirable low switching threshold voltage, therefore, can be obtained by the stabilization through annealing and changing physical dimensions.imensions.sions.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.9
• /
• pp.801-803
• /
• 1995

• Korean Journal of Materials Research
• /
• v.21 no.4
• /
• pp.196-201
• /
• 2011

It is known that the relative dielectric constant of insulating polyethylene matrix composites with conducting materials (such as carbon black and metal powder) increases as the conducting material content increases below the percolation threshold. Below the percolation threshold, dielectric properties show an ohmic behavior and their value is almost the same as that of the matrix. The change is very small, but its origin is not clear. In this paper, the dielectric properties of carbon black-filled polyethylene matrix composites are studied based on the effect medium approximation theory. Although there is a significant amount of literature on the calculation based on the theory of changing the parameters, an overall discussion taking into account the theory is required in order to explain the dielectric properties of the composites. Changes of dielectric properties and the temperature dependence of dielectric properties of the composites made of carbon particle and polyethylene below the percolation threshold for the volume fraction of carbon black have been discussed based on the theory. Above the percolation threshold, the composites are satisfied with the universal law of conductivity, whereas below the percolation threshold, they give the critical exponent of s = 1 for dielectric constant. The rate at which the percentages of both the dielectric constant and the dielectric loss factor for temperature increases with more volume fraction below the percolation threshold.

• Publications of The Korean Astronomical Society
• /
• v.12 no.1
• /
• pp.185-196
• /
• 1997

We present a code which identifies individual clouds in crowded region using IMFORT interface within Image Reduction and Analysis Facility (IRAF). We define a cloud as an object composed of all pixels in longitude, latitude, and velocity that are simply connected and that lie above some threshold temperature. The code searches the whole pixels of the data cube in efficient way to isolate individual clouds. Along with identification of clouds it is designed to estimate their mean values of longitudes, latitudes, and velocities. In addition, a function of generating individual images (or cube data) of identified clouds is added up. We also present identified individual clouds using a $^{12}CO$ survey data cube of Galactic Anticenter Region (Lee et al. 1997) as a test example. We used a threshold temperature of $5\sigma$ rms noise level of the data With a higher threshold temperature, we isolated subclouds of a huge cloud identified originally. As the most important parameter to identify clouds is the threshold value, its effect to the size and velocity dispersion is discussed rigorously.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.2
• /
• pp.40-49
• /
• 1996

In this paper, we studied channel assignment and handover schemes for the indoor microcell systems. For efficient frequency spectrum reuse we proposed the high quality reassignment (HQR) scheme. Proposed HQR scheme tries to keep the reuse distances small by monitoring C/I of channels being used. To assign a channel for a new or handove call, the scheme checks C/I of all available channels. Then HQR assigns the channel that has C/I near the threshold value, A_TH. The scheme also checks C/I of ongoing calls and continuously reassigns a new channel when needed. It attempts handover not only when C/I gets below a handover threshold value, HO_TH, but also when C/I becomes above a high quality reassignment threshold, H_TH. The performance of the proposed HQR scheme was analyzed by a computer simulation configuraed. The performance of the scheme was also analyzed for various threshold values selected and the results are presented in this paper. The results show that HQR scheme perfomrs better than the scheme adopted for DECT.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.159-162
• /
• 1998

Land cover and land use classification on a huge scale, e.g. national or continental scale, has become more and more important because environmental researches need land cover: And land use data on such scales. We developed a crop field extraction method, which is one of the steps in our land cover classification system for a huge area. Firstly, a crop field model is defined to characterize "crop field" in terms of NDVI value and textual information Textual information is represented by the density of straight lines which are extracted by wavelet transform. Secondly, candidates of NDVI threshold value are determined by "scale-space filtering" method. The most appropriate threshold value among the candidates is determined by evaluating the line density of the area extracted by the threshold value. Finally, the crop field is extracted by applying level slicing to Landsat TM image with the threshold value determined above. The experiment demonstrates that the extracted area by this method coincides very well with the one extracted by visual interpretation.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.3
• /
• pp.132-138
• /
• 1997

Electrical characteristics of split-gate flash EEPROM with triple polysilicon is investigated in terms of effects of floating gate and offset gate. In order to search for t the effects of offset gate on programming characteristics, threshold voltage and drain current are studied with variation of control gate voltage. The programming process is believed to depend on vertical and horizontal electric field as well as offset gate length. The erase and program threshold voltage are found to be almost constant with variation of control gate voltage above 12V, while endurance test indicates degradation of program threshold voltage. With increase of offset gate length, program threshold voltage becomes smaller and the drain source voltage just after program under constant control gate voltage becomes higher.