• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1729-1742
• /
• 2017

In designing System Protection Schemes (SPSs) in power systems, protecting transmission network against extreme undesired conditions becomes a significant challenge in mitigating the transmission line overloading. This paper presents an intelligent Special Protection and Control Scheme (SPCS) using of Differential Evolution with Adaptive Mutation (DEAM) approach to obtain the optimum generation rescheduling to solve the transmission line overloading problem in system contingency conditions. DEAM algorithm employs the attraction-repulsion idea that is applied in the electromagnetism-like algorithm to support the mutation process of the conventional Differential Evolution (DE) algorithm. Different N-1 contingency conditions under base and increase load demand are considered in this paper. Simulation results have been compared with those acquired from Genetic Algorithm (GA) application. Minimum severity index has been considered as the objective function. The final results show that the presented DEAM method offers better performance than GA in terms of faster convergence and less generation fuel cost. IEEE 30-bus test system has been used to prove the effectiveness and robustness of the proposed algorithm.

• Carbon letters
• /
• v.7 no.3
• /
• pp.188-195
• /
• 2006

Phosphoric acid-activated carbon WP's and zinc chloride-activated carbons WZ's were developed from wild cherry stones. The textural properties of the activated carbons were determined from nitrogen adsorption data at 77 K and the chemistry of the carbon surface, i.e. the surface carbon-oxygen groups (type and amount) was determined from the base and acid neutralization capacities (Boehm method). The adsorption of phenol, p-nitrophenol, p-chlorophenol, dinitrophenol and dichlorophenol was followed at 298 K. The activated carbons obtained were characterized by high surface area and large pore volumes as well as by high surface concentration of C-O groups. The investigated carbons exhibited high adsorption capacities towards phenols with these capacities increased with the increase of molecular weight and the decrease of the solubility of phenol in water. However, no general relationship could be observed between the adsorption capacities of carbons and any of their textural parameters or their surface chemistry. This may be attributed to the many factors controlling phenol adsorption and the different types and mechanisms of adsorption involved.

• Journal of Applied Reliability
• /
• v.11 no.1
• /
• pp.97-110
• /
• 2011

BLDC(Brushless Direct Current) motor is a powerful device to control the automotive electronic components used in green cars such as HEV/EVs(Hybrid Electric Vehicle and Electric Vehicle). This study is to propose reliability test items derived through pretesting, suitability analysis abd classification of previous BLDC motor tests. For environmental stress tests are determined by analysing environmental conditions and relevant failure mechanisms induced by climate loads, mechanical loads, chemical loads, etc. ATL and HALT are also considered for life testing and screening.

• Toxicological Research
• /
• v.24 no.4
• /
• pp.297-305
• /
• 2008

This study was carried out to measure the concentration of heavy metals (Pb, Mn, Cr, Cd, Ni, Zn, and Cu) in water and Bolti fish (Tilapia nilotica) samples collected from Rasheed branch of River Nile, north of El-Giza Governorate, Egypt by atomic absorption spectrophotometry. The investigated districts through which the branch passes include El-Manashi, Gezzaya, El Katta, Abo Ghaleb and Wardan. Based on WHO and FAO safety reference standards, the results of the current study showed that water and fish tissues were found to contain heavy metals at significantly variable concentration levels among the investigated districts. They were polluted with respect to all the metals tested at Gezzaya district. However, the levels of analyzed metals in water and fish tissues were found lower than legal limits in other districts. The heavy metals showed differential bioaccumulation in fish tissues of the different districts as the accumulation pattern (as total heavy metal residues) was district dependant as follow: Gezzaya > Wardan > El Katta > Abo Ghaleb > El Manashi.

• Biomedical Science Letters
• /
• v.9 no.1
• /
• pp.1-8
• /
• 2003

Liver is an organ having an ability to regenerate by itself when it is damaged or removed. Since the research on the liver regeneration so far was regarding on the cellular multiplications not the formation of the shape, we intended to analyze the expression pattern of Hox genes during liver regeneration. RNA samples isolated from liver at the time of partial hepatectomy, 4 hours as well as 3 days later following regeneration were used to perform RT-PCR with Hox-specific degenerate primers. The PCR products were cloned, sequenced and analyzed through BLAST program. Genes belonging to the AbdB type Hox genes (paralogous groups IX-XIII) expressed predominantly during regeneration, while the other group (I-VII), especially Hoxal and bl seemed to be expressed continuously before and after regeneration. These data altogether imply that paralogous group IX and X genes including Hoxa10 and d10 seemed to be regeneration specific genes of liver.

• Environmental Engineering Research
• /
• v.25 no.4
• /
• pp.605-613
• /
• 2020

This study is to investigate the possibility of using activated carbon prepared from Iraqi date-pits (ADP) which are produced from palm trees (Phoenix dactylifera L.) as low-cost reactive material in the permeable reactive barrier (PRB) for treating lead (Pb⁺²) from the contaminated groundwater, and then compare the results experimentally with other common reactive materials such as commercial activated carbon (CAC), zeolite pellets (ZP). Factors influencing sorption such as contact time, initial pH of the solution, sorbent dosage, agitation speed, and initial lead concentration has been studied. Two isotherm models were used for the description of sorption data (Langmuir and Freundlich). The maximum lead sorption capacities were measured for ADP, CAC, and ZP and were found to be 24.5, 12.125, and 4.45 mg/g, respectively. The kinetic data were analyzed using various kinetic models particularly pseudo-first-order, pseudo-second-order, and intraparticle diffusion. COMSOL Multiphysics 3.5a depend on finite element procedure was applied to formulate transmit of lead (Pb⁺²) in the two-dimensional numerical (2D) model under an equilibrium condition. The numerical solution shows that the contaminant plume is hindered by PRB.

• International Journal of Quality Innovation
• /
• v.10 no.1
• /
• pp.77-87
• /
• 2009

The main aim of the paper is to provide an empirical analysis on patient satisfaction as an indicator of service quality in Malaysian public hospitals. Self-administered questionnaires were administered to patients by convenience sampling. Two sets of questionnaires were used, one for inpatient and another one set for outpatient. Selection of hospitals was made according to states in Peninsular Malaysia. 23 hospitals covering all state level hospitals, the National Referral Centre and selected district hospitals were chosen as respondent hospitals. Two dimensions of service quality emerged, namely clinical and physical dimension of service. Both outpatient and inpatient were found to be more satisfied with clinical dimension of service than physical dimension. For outpatient satisfaction, there was positive correlation between waiting time and patient satisfaction. Patient satisfaction was also found to be higher in the smaller district hospitals than in the larger state hospitals. For clinical dimension of service, patients were satisfied with the services of doctors and nurses, while for physical dimension of service, patients were satisfied with the cleanliness of the facilities. The ability of the research to be conducted by random sampling was inhibited by the reluctance of patients to cooperate, which led to the use of convenience sampling. Studies have also shown that patients are reluctant to express their feelings on services provided by their caregivers. The study provides primary data for a nationwide study on patient satisfaction in Malaysian public hospitals, for both inpatient and outpatient.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.9 no.2
• /
• pp.83-93
• /
• 2009

Recently, El-Naschie has shown that the notion of fuzzy topology may be relevant to quantum paretical physics in connection with string theory and E-infinity space time theory. In this paper, we study the concepts of r-fuzzy semi-I-open, r-fuzzy pre-I-open, r-fuzzy $\alpha$-I-open and r-fuzzy $\beta$-I-open sets, which is properly placed between r-fuzzy openness and r-fuzzy $\alpha$-I-openness (r-fuzzy pre-I-openness) sets regardless the fuzzy ideal topological space in Sostak sense. Moreover, we give a decomposition of fuzzy continuity, fuzzy ideal continuity and fuzzy ideal $\alpha$-continuity, and obtain several characterization and some properties of these functions. Also, we investigate their relationship with other types of function.

• Advances in nano research
• /
• v.3 no.4
• /
• pp.225-242
• /
• 2015

The current investigation aims to study performance of geopolymer mortar reinforced with Multiwalled carbon nanotubes upon exposure to $200^{\circ}C$ to $1000^{\circ}C$ for 2 hrs. MWCNTs are doped into slag Geopolymer mortar matrices in the ratio of 0.0 to 0.4, % by weight of binder. Mortar composed of calcium aluminosilicate to sand (1:2), however, binder composed of 50% air cooled slag and 50% water cooled slag. Various water / binder ratios in the range of 0.114-0.129 used depending on the added MWCNT, while 6 wt., % sodium hydroxide used as an alkali activator. Results illustrate reduction in mechanical strength with temperature except specimens containing 0.1 and 0.2% MWCNT at $200^{\circ}C$, while further increase in temperature leads to decrease in strength values of the resulting geopolymer mortar. Also, decrease in firing shrinkage with MWCNT up to 0.1% at all firing temperatures up to $500^{\circ}C$ is observed, however the shrinkage values increase with temperature up to $500^{\circ}C$. Further increase on the firing temperature up to $1000^{\circ}C$ results in an increase in the volume due to expansion.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.21-26
• /
• 2006

This paper focuses on modeling and predicting differential GPS corrections transmitted by marine radio-beacon systems using artificial neural networks. Various neural network structures with various training algorithms were examined, including Linear, Radial Biases, and Feedforward. Matlab Neural Network toolbox is used for this purpose. Data sets used in building the model are the transmitted pseudorange corrections and broadcast navigation message. Model design is passed through several stages, namely data collection, preprocessing, model building, and finally model validation. It is found that feedforward neural network with automated regularization is the most suitable for our data. In training the neural network, different approaches are used to take advantage of the pseudorange corrections history while taking into account the required time for prediction and storage limitations. Three data structures are considered in training the neural network, namely all round, compound, and average. Of the various data structures examined, it is found that the average data structure is the most suitable. It is shown that the developed model is capable of predicting the differential correction with an accuracy level comparable to that of beacon-transmitted real-time DGPS correction.