• Progress in Superconductivity
• /
• 제12권2호
• /
• pp.82-87
• /
• 2011

We studied the trapped field properties of bulk Y-Ba-Cu-O superconductors by applying 3 T of the permanent or $Nb_3Ti$ superconducting magnet. The 28 mm circular type of YBCO bulk superconductor was prepared and then hole at the center of bulk, parallel to the c-axis, was mechanically drilled. Typical size of hole in YBCO bulk was 10 mm in diameter. In order to examine the trapped field variation in terms of different impregnated materials, a hole in YBCO bulk was filled with resin and indium respectively. The trapped field decay due to flux flow was determined in terms of time. Our preliminary result indicates the trapped field value measured on the YBCO without hole after 30 minute by applying 3 T, was 6,500 G, which is much higher than that, 4,500 G, measured on YBCO with hole. Also, we confirmed that the tendency of a trapped field decrement with time was almost the same regardless of the impregnated materials in YBCO.

• 대한치과교정학회지
• /
• 제42권4호
• /
• pp.218-224
• /
• 2012

Objective: To investigate the resistance to sliding (RS) in self-ligating and conventional ligation bracket systems at 5 different second-order bracket angulations by using low-stiffness alignment wires in a 3-bracket experimental model and to verify the performance of the main RS components in both systems when these wires are used. Methods: Interactive self-ligating brackets with closed and open slides were used for the self-ligating (SL) and conventional ligation (CL) groups, respectively; elastomeric ligatures (1 mm inner diameter) were used in the latter system. The alignment wire used was 0.014 inch heat-activated NiTi (austenitic finish temperature set at $36^{\circ}C$ by the manufacturer). A custom-made testing machine was used to measure frictional resistance. Tests were repeated 5 times at every angulation simulated. All data were analyzed statistically. Results: The RS increased significantly with increasing angulation in both SL and CL groups (p < 0.0001). However, the RS values were significantly higher at every angulation (p < 0.0001) in the CL group. Conclusions: Despite the relevance of the binding phenomenon, ligation forces predominantly affect the RS when lowstiffness alignment wires are used.

• 한국해양공학회지
• /
• 제9권1호
• /
• pp.92-100
• /
• 1995

The effect of different anisotropy and stress ratio on fatigue crack propagation behavior was investigated under various stress ratio(R=-0.4, -0.2, 0.2, 0.2, 0.4) using pure titanium sheet used in aerospace, chemical and food industry. The rack closure behavior under constant load amplitude fatigue crack propagation test was examined. Fatigue crack propagation rate da/dN was estimated in terms of effective stress intensity factor range, $\Delta$K$_{eff}$, regardless of various stress ratio but was influenced by anisotropy. Also, it was found that the effect of anisotropy was considerably decreased but still not negligible when he da/dN was evaluated by a conventional parameter, $\Delta$$K_{eff}$/E and when the modified da/dN.$\sqrt{\varepsilon}_f$ was evaluated by $\Delta$$K_{eff}$/E. On the other hand, da/dN could be evaluated uniquely by effective new parameter, $\Delta$K$_{eff}$/$sigma_{ys}$, regardless of anisotropy, as int he following equation da/dN=C''[\frac{{\Delta}K_{eff}}{{\sigma}_{ys}}]^{n''}. And effective stress intensity factor range ratio, U was estimated by the following equation with respect to the ratio of reversed plastic zone size, $\Delta r_{p}$ to monotonic plastic zone size, $r_p$ regardless of stress ratio and anisotropy. U=-4.45$(\Delta r_{p}/r_{p})^{2}$+4.1$(\Delta r_{p}/r_{p})$+0.245_{p})$+0.245

• 한국발생생물학회지:발생과생식
• /
• 제7권2호
• /
• pp.81-88
• /
• 2003

정자의 운동개시는 수정시에 정자와 난자가 만나기 위한 전제조건이다. 동물의 정자는 CAMP와Ca2'의 조절기구에 의해서 정자의 운동개시가 일어난다. 정자운동 활성 및 개시를 위한 세포 신호전달기구는 멍게류와 연어과 어류에서 많은 연구가 이루어져 왔다. 멍게류의 경우, 난에서 분비되는 정자 활성 및 유인물질(sperm-activating and -attracting factor)은 정자 활성 및 난으로의 유인을 위하여 외부의 $Ca^{2+}$을 요구한다. 한편 연어과 어류의 정자에서는 Cyclic AMP 의존형의 단백질 인산화가 정자 운동개시 기구에 관여한다. 방정된 정자 주위의 $K^{+}$ 농도의 감소는 특정한 $K^{+}$ channel 및 dihydropyridine 감수성의 L-/T- type $Ca^{2+}$ channel을 통한 $K^{+}$ 유출과 $Ca^{2+}$ 유입에 의해 세포막의 과분극과 세포내 $Ca^{2+}$ 이온의 농도증가를 가져온다. 세포막의 과분극에 의해서 합성된 cyclic AMP는 정자 운동개시의 주요기구인 cyclic AMP의존형의 단백질 인산화를 유도한다.

• 열처리공학회지
• /
• 제18권1호
• /
• pp.29-40
• /
• 2005

Formation of nanocrystalline ferrite was investigated using milled powders obtained by planetary ball milling of chips, which were made by high speed mechanical cutting of a low carbon steel(0.15%C-1.1%Mn-0.01%Ti). After 4 hour milling the chips were changed to powders of $50{\mu}m$ in average size, and with increasing milling time the powders were refined to about $3{\mu}m$ for 128 hour and showed more equiaxed shapes. Nanocrystalline(nc) region appeared in the surfaces of powders milled for 1 hour, and the 4 hour milled powders were almost filled with nc region. Hardness of nc region was much higher than that of work-hardened(WH) region. With increasing milling time, ferrite and cementite in pearlite were severely deformed and lamellar spacing was decreased, and then cementites began to disappear after 4 hour milling due to dissolution into ferrite. Deformation bands formed in lightly work-hardened region showed large width and similar crystallographic orientations. Spacing of deformation bands was decreased with deformation and the layered microstructure consisting of narrow deformation bands subdivided into variously oriented small grains was formed by more deformation, and eventually this structure seemed to be evolved to the nc structure by further deformation. It is also conjectured the growth of nc ferrite grains occurred through the coalescence of nanocrystalline ferrites rather than the nucleation and growth of recrystallized grains.

• Journal of Animal Science and Technology
• /
• 제47권1호
• /
• pp.73-82
• /
• 2005

This study was carried out to evaluate changes in the characteristics of the fermented pork using a Korean traditional seasonings. Biceps femoris were cut to cube(7 ${\times}$ 12 ${\times}$ 2 em) and three Korean traditional seasonings such as soybean paste(Tl), garlic paste(T2), red pepper paste(T3), were seasoned by the proportions of meat to each seasonings(l: 1), respectively. The seasoned samples were fermented at 0 $\pm$ 1 $^{\circ}C$ for 10 days. Sensory evaluation did not significantly differ between all treatments. The highest pH among treatments were shown in T2, wheres T3 showed the lowest value. The highest saccarinity was shown in T2, followed by T3. Salinity was shown to be higher in all treatments. Shear force value was the highest in T2 and T3. VBN and TBARS increased during storage. The total bacterial counts was highest of storage 21 days. E. coli. was higher in the order of T2 > T3 > TI. Lactobacilli spp. was higher in the order of T2 > T1 > T3.

• 한국전기전자재료학회논문지
• /
• 제31권1호
• /
• pp.19-23
• /
• 2018

In a Pb-included piezoelectric composition, $Sr_yPb_{1-y}[(Zn_{1/3}Nb_{2/3})_x-(Ni_{1/3}Nb_{2/3})_{0.2}-(Zr_{0.46}Ti_{0.54})_{0.8-x}]O_3$ was selected in order to attain high piezoelectric properties. According to the PZN ratio (x) and the amount of Sr doping (y), the crystal structure, microstructure and piezoelectric properties were measured and evaluated. In the case of Sr 4 mol% doping, the piezoelectric properties were the highest for a PZN ratio of 0.1. In this condition, the grain size was larger and the intensity was higher. With the PZN ratio fixed and varying the Sr doping, the piezoelectric properties increased until 10 mol% doping and then decreased for over 12 mol% doping. In the case of x＝0.1 and y＝10 mol%, the best piezoelectric properties were obtained, i.e., $d_{33}=660pC/N$ and $k_p=68.5%$, and these values seem to be related to the grain size and crystal structure.

• 한국수산과학회지
• /
• 제27권4호
• /
• pp.335-343
• /
• 1994

명태연육 냉동변성을 억제할 수 있는 냉동변성방지제의 적정량을 알아보기 위하여 crystalline sorbitol을 비롯한 세가지의 변성방지제 및 sorbitol/sucrose 혼합제제를 첨가하 여 $-25^{\circ}C$에서 16주간 저장했을 때의 단백질품질 변화를 실험하였다. $8\%$ 수준의 sucrose-sorbitol 혼합제제(1:1, w/w)를 $0.2\%$ Na-pyrophosphate/ Na-triphosphate(1:1)와 병용하였을 때 drip loss가 가장 적었으며, 염용성단백질량은 가장 많았다. 또한 혼합제제를 사용했을 때는 trypsin inhibitor량, 단백질소화율 및 단백효율비의 변화가 거의 없어 단백질품질 보전에 효과적이었으나, 냉동변성방지제를 처리하지 않았을 경우에는 단백효율비와 소화율은 급격히 떨어졌었다. Polyphosphate나 maltodextrin의 경우에는 처리 농도가 증가하여도 소화율저하 방지에는 별효과가 없었으나, $4{\sim}6\%$의 sorbitol, 또는 $10\%$수준의 sucrose는 polyphosphate를 병용하지 않아도 소화율저하는 효과적으로 막을 수 있었다. $8\%$ 수준의 sorbitol/sucrose 혼합제제(5:3, w/w)처리가 소화율 보전효과로 볼 때 냉동연육의 단백질품질저하 방지에 가장 효과적이었다.

• 한국식품영양과학회지
• /
• 제16권2호
• /
• pp.98-104
• /
• 1987

메뚜기 건조시료의 in vitro 소화율과 trypsin 비소화성물질을 정량하고, 아미노산 분석결과를 이용하여 이들 시료의 품질을 C-PER technique으로 평가하였다. 메뚜기 건조시료의 조단백질이 73% 이상(건물중량)으로 단백질원으로서의 가치가 인정되며 chitin질을 제거하면 순도가 높은 단백질을 얻을 수 있을 것이다. 특히 인(p)과 아연(zn)의 함량이 높게 나타났다. In vitro 소화율은 탈지시료가 일건 및 열풍건조 시료에 비하여 높게 나타나 열처리로 인한 소화율의 감소를 가져왔으며 이는 trypsin 비소화성물질의 증가와 밀접한 관계를 가진다. 아미노산 분석결과 lysine의 함량이 ANRC casein에 비하여 특히 낮았으며 tryptophan과 methionine의 함량이 낮았고 aspartic acid, glutamic acid, arginine등의 함량이 일건 및 열풍건조 시료에서 증가하는 경향을 나타내었다. 전반적인 단백효율비의 계산 결과 C-PER이 아미노산 분석결과로만 계산되는 DC-PER에 비해 높은 결과를 나타내었고, 예측소화율은 90%정도로 나타났다. 이상에서 메뚜기 일건 및 열건시료는 산화지질과의 반응으로 단백질의 손실을 초래하였고 TIS의 증가, 아미노산 조성의 변화로 in vitro 소화율저하를 초래하였다.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.743-746
• /
• 2019

본 논문에서는 새로운 해양 방사선 자동 감시 시스템을 제안한다. 제안하는 시스템은 다음과 같은 특징들을 가진다. 첫 번째로 NaI + PVT 혼합형 검출기를 사용함으로 반응속도가 빠르고 정밀분석이 가능하다. 두 번째로 섬광체형 센서에 온도보상 알고리즘을 적용함으로서 추가적인 냉각장치가 필요 없으며 시시각각 변화하는 해양환경에 안정적인 운영이 가능하다. 세 번째로 냉각장치가 필요 없으므로 전력소비량이 적어 태양열을 활용하여 전력의 안정적인 공급이 가능하므로 해양환경 관측부이에 설치 가능하다. 네 번째로 GPS 및 무선통신을 사용하여 측정지역에 대한 정확한 위치정보와 실시간 데이터 전송기능으로 주변국 등의 원전사고 등 발생 시 즉각적인 경보대응이 가능하다. 제안된 시스템의 성능을 평가하기 위하여 공인시험기관에서 실험한 결과는 방사선 측정범위는 세계 최고 수준인 $5{\mu}Sv/h{\sim}15mSv/h$의 범위에서 측정이 되었고, 정확도는 ${\pm}8.1%$의 측정 불확도가 측정되어 국제 표준인 ${\pm}15%$ 이하에서 정상동작 됨이 확인되었다. 내환경등급(방수)은 IP67을 달성하였고, $-20{\sim}50^{\circ}C$ 동작온도에서 5% 이내로 변동률이 측정되어서 안정성이 확인되었다. 진동시험 후 측정값 변화율이 10% 이내로 측정되어서, 파도에 의한 해양환경에서 진동으로 인한 측정값의 변화가 없을 것으로 확인되었다.