• 한국통신학회논문지
• /
• 제10권5호
• /
• pp.258-265
• /
• 1985

이 論文은 SISO 離散時間 基準모델 適應制御시스템에 대한 設計問題를 다루었다. 基準모델과 未知시스템의 入·出力端에 狀態變數필터를 도입하므로서, 可用信號들로 구성된 아주 간단한 適應시스템을 구성할 수 있다. 未知시스템의 相對次數가 1 또는 2 이상인 경우의 設計法은 多數 발표되었으나, 構造가 매우 복잡하거나 設計理論이 일반화하지 못하였다. 본 論文에서는 相對次數가 2이상인 경우에 간단한 線型필터를 도입하므로서 適應構造를 간단히 구성할 수 있음을 證明하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제8권1호
• /
• pp.79-86
• /
• 2007

In this paper, an adaptive control algorithm using system identification is proposed for an aircraft fault tolerant control system. A discrete state-space system is reformulated to be the ARX model which has the advantage in handing variable structure systems. Discrete model reference adaptive control is used to make the output of fault system follow the output of reference model. To validate the performance of the proposed control scheme, numerical simulations are performed for the high performance aircraft with control surface damage.

• 대한기계학회논문집A
• /
• 제21권12호
• /
• pp.2081-2089
• /
• 1997

Accurate positioning of the throttle valve of a gasoline engine is required to implement various systems such as traction control system(TCS), cruise control system and drive-by-wire system. In this research, position control system has been developed for the throttle actuator system that uses one throttle actuation for small volume and DC servo motor for fast response. In order to drive the DC motor, PWM signal generator and PWM amplifier were built and interfaced to the motor and controller. Also, time delay control(TDC) law has been used as a basic control algorithm. A method of varying the reference model of the TDC according to the size of change in target throttle angle is proposed here. The simulation and experimental results show that both overshoot prevention and fast response are achieved by the TDC technique with this variable reference model.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.56-59
• /
• 1995

In this paper, we propose a new rubust design scheme of a variable structure type model reference control (VS-MRC) which can be applied to linear time-varing plants. Our idea is started from the hypothesis that the plant consists of two parts, i.e., one has time-invariant parameters and the other has time-varying parameters. We consider the former the nominal part of the plant and the latter a kind of disturbance to the nominal one. In this design scheme, the ordinary VS-MRC is adopted to the nominal part and the signum function is introduced to eliminate the influence of the disturbance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2008-2011
• /
• 1998

When the vector control, which does not need a speed signal from a mechanical speed sensor, it is possible to reduce the cost of the control equipment and to improve the control performance in many industrial application. This paper describes a rotor speed identification method of induction motor based on the theory of Model Reference Adaptive System(MRAS). The identifier execute the rotor speed identification so that the vector control of the induc-tion motor may be achieved. The improved auxiliary variable are introduce to perform accurate rotor speed identification. Simulation and experimental result show the validity of the proposed control method.

• 제어로봇시스템학회논문지
• /
• 제17권10호
• /
• pp.1029-1036
• /
• 2011

An energy-efficient reference walking trajectory generation algorithm is suggested utilizing allowable ZMP (Zero-Moment-Point) region, which maxmizes the energy efficiency for cyclic gaits, based on three-dimensional LIPM (Linear Inverted Pendulum Model) for biped robots. As observed in natural human walking, variable ZMP manipulation is suggested, in which ZMP moves within the allowable region to reduce the joint stress (i.e., rapid acceleration and deceleration of body), and hence to reduce the consumed energy. In addition, opimization of footstep planning is conducted to decide the optimal step-length and body height for a given forward mean velocity to minimize a suitable energy performance - amount of energy required to carry a unit weight a unit distance. In this planning, in order to ensure physically realizable walking trajectory, we also considered geometrical constraints, ZMP stability condition, friction constraint, and yawing moment constraint. Simulations are performed with a 12-DOF 3D biped robot model to verify the effectiveness of the proposed method.

• 한국CDE학회논문집
• /
• 제12권4호
• /
• pp.245-254
• /
• 2007

This research proposed feature extraction algorithms as an input of STEP Ap214 data, and feature parameterization process to simplify further design change and maintenance. The procedure starts with suppression of blend faces of an input solid model to generate its simplified model, where both constant and variable-radius blends are considered. Most existing cell decomposition algorithms utilize concave edges, and they usually require complex procedures and computing time in recomposing the cells. The proposed algorithm using reference features, however, was found to be more efficient through testing with a few sample cases. In addition, the algorithm is able to recognize depression features, which is another strong point compared to the existing cell decomposition approaches. The proposed algorithm was implemented on a commercial CAD system and tested with selected industrial product models, along with parameterization of recognized features for further design change.

• 대한전자공학회논문지
• /
• 제22권6호
• /
• pp.89-96
• /
• 1985

단일 입·출력 시불변 비최소 위상 공정에 대한 폴-플레이스먼트 제어기를 기준 모델을 사용하여 설계하였다. 제안된 폴-플레이스먼트 제어기는 변수 다항식5(q-1)만을 사용하여 파라미터 형으로 나타내어 기준모델의 전달함수와 제어기의 전달함수를 같게 하는 방법을 사용하였다. 또한, 적응 폴-플레이스먼트 제어기는 위의 제어기에 적응 알고리즘을 적응하여 제어기의 파라미터를 추정 하도록 설계 되었다.

• 한국CDE학회논문집
• /
• 제7권3호
• /
• pp.148-156
• /
• 2002

Most Rapid Prototyping (RP) processes adopt a solid Computer Aided Design (CAD) model, which will be sliced into thin layers of constant thickness in the building direction. Each cross-sectional layer is successively deposited and, simultaneously, bonded onto the previous layer; and eventually the stacked layers from a physical part of the model. A new RP process, the transfer-type Variable Lamination Manufacturing process using expandable polystyrene foam sheet (VLM-ST), has been developed to reduce building time and to improve the surface finish of parts with the thick layers and a sloping surface. This paper describes the generation of Unit Shape Layer (USL), the cutting path data of the linen. hotwire cutter for the VLM-ST process. USL is a three-dimensional layer with a thickness of more than 1 mm and a side slope, and it is the basic unit of cutting and building in the VLM-ST process. USL includes data such as layer thickness, positional coordinates, side angles of each layer, hotwire cutting speed, the heat input to the hotwire, and reference shape. The procedure of generating USL is as follows: (1)Generation of the mid-slice from the CAD model, (2)Conversion of the mid-slice into a simply connected domain, (3)Generation to the reference shape for the mid-slice, (4)Calculation of the rotation angle of the hotwire of the cutting system.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권7호
• /
• pp.808-815
• /
• 2006

In this paper, we suggest decoupling control method based on general PI control law to control variable speed refrigeration system of the ship effectively. In the variable speed refrigeration system, the capacity and the superheat are controlled by inverters and electronic expansion valves respectively for saving energy and improving cost performance. Thus, we propose decoupling model to eliminate the interfering loop between capacity and superheat at first. Next, we design PI controller to control capacity and superheat independently and simultaneously. Finally the control performance was investigated through some experiments. The experimental results show that the PI control design can obtain good control performance under the adjustable control reference and thermal load variation.