• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.10
• /
• pp.1014-1023
• /
• 2008

Subway electric trains need to be faster for accommodation of long distance passengers. The faster run of the existing trains results in deterioration of ride quality due to noise and vibration. To reduce the noise and vibration of the electric train, a running test of the electric train was performed and an ADAMS/Rail model was set up to verify the running test results. The experimental results show that the sources of the cabin noise and vibration basically comes from the irregularity of the railroad track and the deterioration of the connection part between cabin and bogie. Consequently for mitigation of noise and vibration of the electric train, the redesign of the center pivot with softer stiffness and the minimization of rail irregularity are necessary. the frequent maintenance of the train will lead to better comport.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.383-386
• /
• 2005

An integrated analytical model which should have essential dynamics on the longitudinal railway vehicle is developed. The model consists of translational movement, rotational movement, brake actuator, adhesion force between rail and wheel, and brake friction force between wheel and pad. Thus, during the deceleration for stopping, a feedback controller controlling the brake cylinder pressure is designed to improve ride quality and to release friction problems. Through the developed model, the feasibility of controlling the cylinder pressure is verified for the better performances during braking.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1056-1061
• /
• 2007

Railroad roadbed was consisted into structure types that earthwork, tunnel, bridge and joint sections. Joint section was affected a large factor confidence and safety of the train running by stiffness transition zone that track substructure stiffness change section as like between tunnel and earthwork from ballast track to concrete track. These problems are the results of increased dynamic wheel loads, which also lead to wear and tear on vehicle components and contribute to poor ride quality. The study presented in this paper was conducted on model test by using Wheel Moving Loading System.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.244-250
• /
• 2007

The electric train in the first line subway runs faster in the block from Suwon to Cheonan than the general block. The faster run results in the deterioration of ride quality due to the increase of noise and vibration. To reduce the noise and vibration of the electric train, a running test of the electric train was performed in the block from Suwon to Cheonan. The experimental results show that the sources of the noise and vibration basically comes from the irregularity of the railroad track and the connection part between car body and bogie. The possible countermeasure of the high speed electric train can be the reinforcement of the center pivot to have more flexibility and the frequent maintenance of electric train.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.425-431
• /
• 1994

THe dynamic characteristics of car are determined by ride quality and control stability. These characteristics are maintained by suspension, which is composed of springs, dampers and links. The values of these parameters are very important factor to determine the dynamic characteristic. Until now, most of company depends on trial-and-error method and driving test to solve this problem. But these methods are consumed many costs and time in developing process. In this paper,to minimize these difficulties,the proper model will be developed and analyzed the sensitivity of suspension parameter in time domain. On this ground, find the design parameter that have a dominant infuence on system response and estimate the change of system response values.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.40-49
• /
• 1996

With the advance of the standard of living, the demand on automobile goes beyond the simple transportion equipment, therefore the interior noise reduction has been the important factor for improvement of the ride quality. Idling noise is a major vehicle characteristic determining occupant comfort. In the present research two approaches for noise source identification based on theory for multi-input system have been investigated. The concept of the frequency response function and the multi-dimensional spectral analysis were used to estimated the spectra of the noise source.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.05a
• /
• pp.164-170
• /
• 2002

현재 농업용 장비들은 특성상 사용자에게 심한 양의 진동을 가하고 있다. 이는 사용자에게 나쁜 승차감을 주고 또한 장시간 운전시에는 건강에도 좋지 않은 영향을 줄 수 있다. 본 연구에서는 농업용 트랙터에서 사용자에게 전달되는 진동의 양을 측정하여 사용자가 느끼는 승차감을 정량적으로 측정하고 또한 건강에 미칠 수 있는 영향에 대해 평가해 보았다. 실험은 포장도로와 농로 그리고 논갈기 작업시에 인체에 전달되는 12축의 진동을 측정하였고, 또한 트랙터에 사용되는 서스펜션 시트의 특성을 보기 위해 시트 아래의 수직방향 진동을 측정하였다 실험에 참가한 피실험자는 모두 현재 트랙터를 사용하고 있는 4명을 대상으로 하였다 실험 결과 현재의 트랙터는 사용자에게 좋지 않은 승차감을 주고 있으며 건강에도 좋지 않은 환경을 제공하고 있음을 볼 수 있었다. 이러한 환경을 개선하기 위해서는 서스펜션 시트의 설계가 중요하게 되는데 보다 좋은 승차감을 제공하기 위해서는 인간이 민감하게 느끼고 또 트랙터에서 많은 양이 나타나는 주파수 대역의 진동을 저감하기 위한 설계가 필요하다고 할 수 있다.

• Smart Structures and Systems
• /
• v.6 no.9
• /
• pp.1079-1105
• /
• 2010

Railway transport of goods and passengers is effective in terms of energy conservation and travel time savings. Safety and ride quality have become important issues as train speeds have increased. Due to increased speeds, minor damage to railway structures and abnormal interactions between trains and structures have given rise to increasingly serious accidents. Therefore, structural health and operational conditions must be monitored continuously in all service environments. Currently, various health and operation management systems are being developed and these are reducing both maintenance frequency and costs associated with disassembly. In this review, major damage and malfunctions and their locations are first analyzed based on numerous references. Then advanced train health and operation management technologies are classified into wayside detection methods and advanced integrated sensor methods and their operating principle and functions are reviewed and analyzed.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.283-289
• /
• 2004

Rail defects(Corrugation, shelling, etc) are occurred by the Rail with wheel contact stress. Rail grinding is maintaining of optimal rail profile to use special rail grinding machine to remove rail defect. The benefits of rail grinding enforcement, improve track safety, improve track steering and rail life, improve ride comfort and reduce noise, etc. Actually when rail grinding plan apply to field track, we should consider a lot of function before determination, such as grinding method, grinding pass number, removing metal volume, etc. because each track has various characteristics. Therefore it is important that the determination of rail grinding strategy for optimum and economic before enforcement.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1322-1324
• /
• 2004

Lately, there is urban transit vehicles in trend that speed is increased and safety are reinforced. In the case of Japan, is developing vehicles that the electric motor of direct drive type for maintenance expense curtailment and noise decrease. It is predicted to happen the demand of EMU met new environment such as wide area railway in domestic. Furthermore, It is need the introduction of vehicles met new standard according to reinforcement of safety standard such as interior finishing material. Therefore, This paper present about the development direction of urban transit vehicles in domestic environment.