• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.15-21
• /
• 1999

This study investigates the free and forced vibration characteristics of an annular piezoelectric motor stator constructed of two piezoelectric material layers and one stainless steel layer. The annular piezoelectric motor stator is subjected to a travelling load produced by piezo drive electrical voltage input to the two piezoelectric layers. The stator is modeled as an annular laminated plate based on the classical plate theory and the governing equations are derived via Hamilton's variational principle. Variation of the free vibration characteristics as a function of several design parameters has been studied and based on this result, the forced vibration responses to the input electricity of various frequencies and magnitudes are investigated. The obtained results will provide an important criterion, a priori, in the design of piezoelectric motors.

• Journal of the Semiconductor & Display Technology
• /
• v.2 no.2
• /
• pp.9-15
• /
• 2003

This paper proposes a thickness measurement method of silicon-oxide and poly-silicon film deposited on 12" silicon wafer for spin etcher. Halogen lamp is used as a light source for generating a wide-band spectrum, which is guided and focused on the wafer surface through a optical fiber cable. Interference signal from the film is detected by optical sensor to determine the thickness of the film using spectrum analysis and several signal processing techniques including curve-fitting and adaptive filtering. Test wafers with three kinds of priori-known films, polysilicon(300 nm), silicon-oxide(500 nm) and silicon-oxide(600 nm), are measured while the wafer is spinning at 20 Hz and DI water flowing on the wafer surface. From experiment results the algorithm presented in the paper is proved to be effective with accuracy of maximum 0.8% error.rror.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.680-687
• /
• 2000

In this paper we present a new vector control scheme for induction motor. An exact knowledge of the rotor flux position is essential for a high-performance vector control. The position of the rotor flux is measured in the direct scheme or estimated in the indirect schemes. Since the estimation of the flux position requires a priori knowledge of the induction motor parameters, the indirect schemes are machine parameter dependent. The rotor resistance and stator resistance among the parameters change with temperature. Variations in the parameters of induction machine cause deterioration of both the steady state and dynamic operation of the induction motor drive. Several methods have been presented to minimize the consequences of parameter sensitivity in indirect scheme. In this paper new estimation scheme of rotor flux position is presented to eliminate sensitivity due to resistance change with temperature. Simulation results are used to verify the performance of the proposed vector control scheme.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.78-87
• /
• 1999

A mathematical model for the stress free surface profile in Over-Round and Round-Oval grove rolling, which can be used effectively in the calculation of pass area, is presented. The new model has generality, simplicity and accuracy for practical usage. The stress free surface profile of an outgoing stock can be modeled when the maximum spread of it known a priori. The equation for the stress free surface profile is formulated from the linear interpolation of the radius of curvature of an incoming stock and that of roll groove to the axis direction. In developing the analytical model, the effect of rolling temperature and friction between roll and work piece(stock) were not considered since the geometry of roll groove and the incoming work piece were assumed a dominant factor which decides the stress free surface profile of the outgoing stock. A simulation with the analytical model developed also has been carried out to demonstrate the stress free surface profile of the outgoing stock.

• Bulletin of the Korean Mathematical Society
• /
• v.57 no.1
• /
• pp.219-244
• /
• 2020

In this paper, we approximate the solution of the coupled nonlinear Schrödinger equations by using a fully discrete finite element scheme based on the standard Galerkin method in space and implicit midpoint discretization in time. The proposed scheme guarantees the conservation of the total mass and the energy. First, a priori error estimates for the fully discrete Galerkin method is derived. Second, the existence of the approximated solution is proved by virtue of the Brouwer fixed point theorem. Moreover, the uniqueness of the solution is shown. Finally, convergence orders of the fully discrete Crank-Nicolson scheme are discussed. The end of the paper is devoted to some numerical experiments.

• Journal of Korea Water Resources Association
• /
• v.33 no.1
• /
• pp.31-38
• /
• 2000

Relationships between hydrologic variables are often nonlinear. Usually the functional form of such a relationship is not known a priori. A multivariate, nonparametric regression methodology is provided here for approximating the underlying regression function using locally weighted polynomials. Locally weighted polynomials consider the approximation of the target function through a Taylor series expansion of the function in the neighborhood of the point of estimate. The utility of this nonparametric regression approach is demonstrated through an application to nonparametric short term forecasts of the biweekly Great Salt Lake volume.volume.

• The Korean Journal of Applied Statistics
• /
• v.7 no.2
• /
• pp.131-143
• /
• 1994

Under the asymmetric losses (entropy loss and Stein loss), we find the classes of Bayes and empiricla Bayes estimates for estimating the Poisson means when the distributin of means are believed a priori. Following the idea of Efron and Morris (1973), we have a computer simulation to compute a relative savings loss of proposed estimates as compared to the classical estimates.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.8
• /
• pp.3842-3855
• /
• 2018

A novel image completion method is proposed that uses the advantage of planar structural information to fill corrupted portions of an image. First, in estimating parameters of the projection plane, the image is divided into several planes, and their planar structural information is analyzed. Second, in calculating the a priori probability of patch and patch offset regularity, this information is converted into a constraint condition to guide the process of filling the hole. Experimental results show that the proposed algorithm is fast and effective, and ensures the structure continuity of the damaged region and smoothness of the texture.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.3
• /
• pp.504-509
• /
• 1987

In this paper a characteristics of image which can be segmented based on the thresholding technique using a histogram was investigated employing 3 parameters: the variance of pixel value, the average mean difference between target and background and the target size. The threshold value for the histogram segmentation was determined by applying the hypothesis testing theory. The performance of the selected threshold was evaluated by computing a probability of error. Since a priori probability can be easily obtained from the histogram, it was found that the Bayes decision rule which theoretically guarantees the minimum probability of error works better than the minimax criterion rule.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.4
• /
• pp.323-330
• /
• 2014

Various inventory control theories have tried to modelling and analyzing supply chains by using quantitative methods and characterization of optimal control policies. However, despite of various efforts in this research filed, the existing models cannot afford to be applied to the realistic problems. The most unrealistic assumption for these models is customer demand. Most of previous researches assume that the customer demand is stationary with a known distribution, whereas, in reality, the customer demand is not known a priori and changes over time. In this paper, we propose a reinforcement learning based adaptive echelon base-stock inventory control policy for a multi-stage, serial supply chain with non-stationary customer demand under the service level constraint. Using various simulation experiments, we prove that the proposed inventory control policy can meet the target service level quite well under various experimental environments.