• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1673-1675
• /
• 2004

The design, modeling and measurement of RF switch module for GSM applications is presented in this paper. RF switch module is constructed using a LTCC multi-layer switching circuit and integrated low pass filter. Insertion and return loss of the low pass filter were designed less than 0.3 dB and better than 12.7 dB at 900 MHz. The RF switch module contained 10 embedded passives and 3 surface mount components integrated on $4.6{\times}4.8{\times}1.2$ mm, 6-layer multi-layer integrated circuit. The insertion loss of switch module was measured at 900 MHz was 11 dB.

• KSBB Journal
• /
• v.15 no.5
• /
• pp.529-536
• /
• 2000

Results from experiments and mathematical modeling were compared for pervaporative butanol fermentation. The developed model includes expressions to predict characteristics of butanol fermentation, such as, microbial growth, solvent (butanol, acetone, and ethanol) formation and organic acid (acetate and butyrate) production. Butanol diffusivity was 1.15${\times}$10(sup)-7 ㎡/hr at 1.5 L/min-tubing of air flow rate using a pervaporative module. The model correlated well with experimental results (cell growth, glucose consumption and concentrations of solvents and organic acids) for batch fermentation with and without pervaporation. Larger surface area and thinner module tubing resulted in an increased glucose consumption and a decreased residual butanol concentration. Optimum membrane area and thickness were 0.34 ㎡ and 120 $\mu\textrm{m}$, respectively.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.1
• /
• pp.87-99
• /
• 1999

A shop floor control system(SFCS) performs the production activities required to fill orders. In order to effectively control these activities, the autonomous agent-based heterarchical shop floor control architecture is adopted where a supervisor does not exist. In this paper, we define functional perspective of the heterarchical shop floor control using planning, scheduling, and execution modules. In particular, we focus on an execution module that can coordinate the planning and scheduling modules and a general execution module that easily can be modified to execute the other equipment. The execution module can be defined informally as a module that downloads and performs a set of scheduled tasks. The execution module is also responsible for identifying and resolving various errors whether they come from hardware or software. The purpose of this research is to identify all the execution activities and solving techniques under the assumptions of the heterarchical control architecture. And we model the execution module in object-oriented modelling technique for generalization. The execution module modeled in object-oriented concept can be adopted to the other execution module easily. This paper also proposes a classification scheme for execution activities of the heterarchical control architecture. Petri-nets are used as a unified framework for modeling and controlling execution activities. For solving the nonexistence of a supervisor, a negotiation-based solution technique is utilized.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.431-434
• /
• 2004

The design, simulation, modeling and measurement of a RF switch module for GSM applications were presented in this paper. switch module were simulated by ADS and constructed using a LTCC multi-layer switching circuit and integrated low pass filter, designed to operate in the GSM band. Insertion and return losses at 900 MHz of the low pass filters were designed to lower than 0.3 dB and higher than 12.7 dB respectively. The switch module constructed, contained 10 embedded passives and 3 surface mounted components integrated on $4.6{\times}4.8{\times}1.2$ m volume, 6-layer integrated circuit. The insertion loss of switch module at m MHz were around 11 dB.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.3
• /
• pp.89-95
• /
• 1993

This paper presents the development of CAD system for the design of lens of the Turn Signal Lamp that can model and simulate its optical performance. The system consists of three main modules: skin surface modeling module, inner lens modeling module and optical performance simulation module. Skin surface geometry can be modeled by the input of data file and inner lens can be modeled by the input of only four parameter using its geometric characteristics. Also light distribution pattern, the barometer of optical performance is generated by means of finite ray tracing method. The system display modeled geometry, ray tracing and generated light distribution pattern.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.680-687
• /
• 2016

Small and middle sized architectural design firms still have trouble using BIM (Building Information Modeling) for their tasks, which means that it is necessary to develop BIM Libraries and Technical contents. These BIM libraries should be based on common technical standards that reflect the technical contents to provide optimum BIM design support. This is essential to reduce the technological burden on the design office, because BIM does not just involve the 3D modeling of the design, but provides very important information for calculating the quantity of materials required for the construction and providing materials for the design work. Therefore, this research was aimed at improving the efficiency of the BIM design process by developing a system module based on the BIM technical contents data for the purpose of linking the BIM data and technical contents. The developed system module will be expanded to other uses of BIM in the long term.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.05a
• /
• pp.121-124
• /
• 2002

This paper resents a virtual forming system to simulate deep drawing process for stress-strain information by utilizing virtual system designed using Virtual Reality Modeling Language (VRML) and computer aided analysis (CAE) tool. The CAE tool to calculate stress, strain, and deformation is designed using Finite Element Method. Stress distributions and deformation profiles as well as the operation of forming machine can be simulated and visualized in the web. The developed system consists of three modules, input module, virtual forming machine module, and output module. The input nodule was designed using HTML and ASP. The input data for FEM calculation is directed to the forming machine module for calculation. The results from the forming machine module can be visualized through output module as well as the forming process simulation.

• Transactions of Materials Processing
• /
• v.12 no.6
• /
• pp.550-557
• /
• 2003

In this study, a web-based system was developed by utilizing finite element method and virtual system designed using Virtual Reality Modeling Language (VRML). The simulation program for axi-symetric sheet forming is developed using finite flement method. The developed system consists of two modules, client module and server module. The client module was developed by using Active-X control. The input data for FEM calculation is transferred to the server module by using communication protocol. Then sever module performs several successive processes: input data generation, forming simulation, conversion of results to VRML format. After that, the results from the simulation can be visualized on the web browser in client computer. Besides, client module offers the capability to control and navigate on virtual forming machine and calculated result. By using this system simulation result can be investigated more realistically in virtual environment including forming machine.

• Journal of Korean Institute of Industrial Engineers
• /
• v.38 no.4
• /
• pp.262-275
• /
• 2012

This paper develops a multistage scheduling algorithm for the module operation of the LCD(Liquid Crystal Display) production systems and tests the efficiency of the proposed algorithm. The module operation is a multistage form composed of multiple sub operations of processes, and each stage is consists of multiple lines with the same kinds of machines. This paper presents a mathematical modeling reflecting the constraints of the LCD module operation and develops a multistage scheduling algorithm based on tabu search metaheuristic approach. For this purpose, an production order is assigned to a line of the sub operations and a sequence of the assigned order is rearranged to draw an efficient schedule. Simulation experiments test performance measures and show the efficiency of the proposed algorithm.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.379-382
• /
• 2010

This study proposes a way to validate BIM data quality in BIM applications. Solibri model checker is adopted as a module development platform, which is based on Java programming language. The platform makes application developers implement BIM model checker for their own purpose. This study has developed a BIM validation module for circulation analysis of building design. The validation module enables end-users to automatically detect data corrupted or not defined. In case studies, the module found that an IFC file generated from a BIM software has wrong relation information between a space and boundary elements. A building model should satisfy modeling requirements and then domain users can get analysis results. The BIM data validation module needs to be developed in each BIM application domain.