• 제목/요약/키워드: a medium of image

검색결과 593건 처리시간 0.024초

직사각형 프리즘 주위의 유동구조에 대한 경계층 두께의 영향 (Effect of Boundary Layer Thickness on the Flow Around a Rectangular Prism)

  • 지호성;김경천;이승홍;부정숙
    • 대한기계학회논문집B
    • /
    • 제26권6호
    • /
    • pp.893-901
    • /
    • 2002
  • Effect of boundary layer thickness on the flow characteristics around a rectangular prism has been investigated by using a PIV(Particle Image Velocimetry) technique. Three different boundary layers(thick, medium and thin)were generated in the Atmospheric Boundary Layer Wind Tunnel at Pusan National University. The thick boundary layer having 670 mm thickness was generated by using spires and roughness elements. The medium thickness of boundary layer($\delta$=270 mm) was the natural turbulent boundary layer at the test section floor with fairly long developing length(18 m). The thin boundary layer($\delta$=36.5 mm) was generated on the smooth panel elevated 70cm from the wind tunnel floor. The Reynolds number based on the free stream velocity(3 ㎧) and the height of the model(40 mm) was 7.9$\times$10$^3$. The mean velocity vector fields and turbulent kinetic energy distributions were measured and compared. The effect of boundary layer thickness was clearly observed not only in the length of separation bubble but also in the location of reattachment point. The thinner the boundary layer thickness, the higher the turbulent kinetic energy Peak around the model roofbecame. It is strongly recommended that the height ratio between the model and the approaching boundary layer thickness should be encountered as a major parameter.

조선시대 중완구의 제작 기술 (Manufacturing Techniques of Bronze Medium Mortars(Jungwangu, 中碗口) in Joseon Dynasty)

  • 허일권;김해솔
    • 박물관보존과학
    • /
    • 제26권
    • /
    • pp.161-182
    • /
    • 2021
  • 완구(碗口)란 유통식 화기로 발사체 장전 부분이 사발(碗) 형태인 화포이다. 발사체로는 비격진천뢰(飛擊震天雷)나 단석(團石) 등을 사용하였다. 『화포식언해(火砲式諺解)』(이서(李曙), 1635)에 의하면, 대·중·소·소소완구 등 총 4종으로 구분되며, 실물은 대완구 1점(보물 제857호), 중완구 2점(보물 제858호, 제859호) 등 총 3점이 전한다. 본 연구에서는 임진왜란기에 제작된 국립진주박물관 소장 중완구(보물 제858호)와 해군사관학교 박물관 소장 중완구(보물 제859호)의 과학적 조사를 토대로 제작 기술을 확인하였다. 첫 번째로 국내 현전하는 중완구가 단 두점인 만큼 정밀 3D 스캐닝 정보를 바탕으로 세부 제원을 서로 비교하고, 동 시기의 문헌 기록 수치와 함께 검토하였다. 전체 크기차는 근소하나 중량에서 5,507g의 차이를 보이고, 세부적으로 심지구멍 위치와 손잡이 길이가 상이하다. 한편 현전 중완구는 『화포식언해』의 중완구 제원과 가장 유사하다. 두 번째로는 중완구의 성분을 분석하고 기존 청동제 화약 무기와 함께 검토하였다. 표면 성분 분석결과, 중완구는 Cu-Sn-Pb의 삼원계 합금이며, 평균 함량(wt%)은 Cu 85.24 : Sn 10.16 : Pb 2.98이다. 중완구의 재료 성분은 기존에 조사된 조선 청동 화약 무기의 평균 성분과 매우 유사하며, 중세 유럽의 청동제 화포 재료(Gun-metal)와도 유사한 경향임을 확인하였다. 마지막으로 중완구 표면의 주조 결함(casting defect)과 CT 상을 토대로 주조 기법을 추정하였다. 측면의 주조분할선으로 보아 주형을 반으로 나눈 분할 제작(piece mold)이며, 용탕의 주입은 약실끝 부분으로 포구가 바닥에 오는 수직 주형 설계로 추정한다. 특히 포신 기벽에서 주형과 코어를 고정하는 보조 장치인 채플릿(chaplets)이 확인되므로 이는 기벽을 일정하게 형성하는 역할을 했을 것이다. 한편 보물 제858호와 제859호 중완구 두 점은 외형이 매우 유사하지만, 채플릿의 수량과 배치가 상이하여 주형 설계 일부가 달랐을 것으로 예상한다.

다중 웨이블릿 변환과 이진영상을 이용한 Blind 워터마킹 (Blind Watermarking Using by Multi-wavelet Transform and Binary Image)

  • 김태호;박무훈
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2005년도 춘계종합학술대회
    • /
    • pp.413-416
    • /
    • 2005
  • 컴퓨터의 발달과 의료기기의 디지털화로 인해 의료영상 분야도 디지털화되고 있다. PACS 시스템의 구축으로 의료영상의 데이터 베이스화와 원격 진료 및 저장이 가능하게 됨과 동시에 디지털 의료영상의 불법복제, 소유권 및 데이터 인증 문제 또한 발생하고 있다. 이러한 환경 하에서 환자의 사생활 보호와 의료영상 자체의 소유권, 재산권의 여부 및 데이터 변형 여부의 판별을 위하여 디지털 워터마킹이 사용되고 있다. 기존에 제안된 여러 가지 워터마킹 기법들은 Non-Blind 방식에서는 원 영상이 필요하다는 점과 Blind 방식을 사용할 경우에는 육안으로는 식별이 힘든 양극 워터마크를 사용한다는 단점이 있다. 본 논문은 Blind 워터마킹에서 시각적으로 인지하기 쉽도록 하기 위하여 이진 워터마크 영상을 다중 웨이블릿 변환하고, 원 영상을 이산 푸리에 변환하여 영상의 중간 주파수대에 Circular Input 방식을 이용하여 워터마크를 삽입하는 알고리즘을 제안하였다.

  • PDF

지역축제 서비스품질이 지역기반 창업기업 제품 구매의도에 미치는 영향: 함평나비축제를 중심으로 (The Effect of Local Festival Service Quality to Purchasing Intention of Local Start-up Company Products: Focus on Hampyong Butterfly Festival)

  • 홍인기;민경세
    • 벤처창업연구
    • /
    • 제12권1호
    • /
    • pp.61-71
    • /
    • 2017
  • 지역축제란 지역기반창업기업들에게 매우 소중한 홍보 및 판매의 장이 될 수 있다. 그렇다면 지역축제의 서비스품질은 이들의 제품 판매 활성화에 직접적으로 기여할 수 있는가? 기존의 축제서비스품질과 관련된 연구에서는 축제서비스 품질의 관광산업적 성과에 주로 초점을 맞추었던 것과는 달리, 우리는 축제서비스 품질이 제품판매에 미치는 영향에 초점을 맞추어 연구를 진행하였다. 선행연구 분석을 토대로 하여 우리는 "지역축제의 서비스품질은 지역이미지를 매개로 지역기반창업기업의 제품에 대한 소비자의 구매의도에 영향을 줄 것이다"라는 가설을 세우고 연구를 진행하였다. 그 결과 첫째, 축제서비스 품질은 구매의도에 직접적으로 영향을 주지 않았다. 공감성 차원을 제외할 땐 다른 차원은 모두 직접적 영향을 주지 않았다. 반면 축제서비스 품질의 각 차원은 확신성을 제외하고 지역 이미지를 매개로 구매의도에 유의미한 영향을 주었다. 그리고 구매의도는 구매행동에도 실질적으로 큰 영향을 미치고 있었다. 이를 통해 우리는 지역축제서비스품질은 지역이미지를 매개로 할 때, 지역기반창업기업의 제품판매에 영향을 미친다는 점을 확인할 수 있었다. 다만 영향은 직접적인 영향이 아니라 간접적인 영향이었다. 또한 지역이미지가 중요한 영향을 미치므로 지역이미지를 개선하기 위한 노력이 선행되어야 한다는 점을 제언할 수 있다. 더하여 지역축제서비스 품질의 향상은 지역기반창업기업제품 판매에 긍정적 영향을 준다는 점을 확인할 수 있었으며, 특히 공감성 차원이 영향을 많이 준다는 점을 또한 확인할 수 있었다.

  • PDF

Restoring Turbulent Images Based on an Adaptive Feature-fusion Multi-input-Multi-output Dense U-shaped Network

  • Haiqiang Qian;Leihong Zhang;Dawei Zhang;Kaimin Wang
    • Current Optics and Photonics
    • /
    • 제8권3호
    • /
    • pp.215-224
    • /
    • 2024
  • In medium- and long-range optical imaging systems, atmospheric turbulence causes blurring and distortion of images, resulting in loss of image information. An image-restoration method based on an adaptive feature-fusion multi-input-multi-output (MIMO) dense U-shaped network (Unet) is proposed, to restore a single image degraded by atmospheric turbulence. The network's model is based on the MIMO-Unet framework and incorporates patch-embedding shallow-convolution modules. These modules help in extracting shallow features of images and facilitate the processing of the multi-input dense encoding modules that follow. The combination of these modules improves the model's ability to analyze and extract features effectively. An asymmetric feature-fusion module is utilized to combine encoded features at varying scales, facilitating the feature reconstruction of the subsequent multi-output decoding modules for restoration of turbulence-degraded images. Based on experimental results, the adaptive feature-fusion MIMO dense U-shaped network outperforms traditional restoration methods, CMFNet network models, and standard MIMO-Unet network models, in terms of image-quality restoration. It effectively minimizes geometric deformation and blurring of images.

한국 남성복 광고(韓國 男性服 廣告)의 내용분석(內容分析) - 1962년(年)부터 1998년(年)까지의 잡지(雜誌)와 화보(畵報)를 중심(中心)으로 - (The Content Analysis of Advertising in Fashion Magazines and Pictorials of Korean Men's Wear - From the 1962 to the 1998 -)

  • 권혜숙;권혜욱
    • 패션비즈니스
    • /
    • 제10권4호
    • /
    • pp.16-28
    • /
    • 2006
  • The purpose of this study is to investigate the content and changes of modern Korean men's wear advertisement from the 1960s to the 1990s by reviewing fashion magazines and pictorials. Research problems were as follows.; First, analyze the types and their units of measurement in men's fashion advertisements from 1962 to 1998. Second, examine the differences of quantitative change in men's fashion advertisements according to each period. The total 857 advertisements were selected from Shin Dong-A, Joongang Magazine, and Bokjangwolbo from 1972 to 1998. For analyze the result, frequency analysis and $x^2$-test were used. Results were as follows. First, through the review of literatures and pre-tests, 6 units of measurement were identified. They were product type(formal wear, casual wear, sports wear, dress shirts, accessory, inner wear, fabric and the others), brand type(national brand, licensed brand, imported brand, others), appeal type(image, product, others), representation type(photograph, illustration, others), medium type(man, product, others), and color type of advertisement(black & white picture, color picture). Second, for the types of advertisements, formal wear, national brand, image appeal, figure medium, photograph for presentation and color picture are the most frequently shown in men's fashion advertisements from 1962 to 1998. Third, for product, more accessory advertisements were found than the clothing in the 60s and the 70s, and casual wear advertisements in the 80s and formal wear advertisements in the 90s were dominated. National brand type was dominant through all four period. Product appeal type in the 60s and the 70s and image appeal type in the 80s and the 90s were prevailed. For medium, product type in the 60s and the 70s and figure type in the 80s and the 90s were dominated. Black & white picture in the 60s and the 70s and color picture in the 80s and the 90s were prevailed. Lastly, photograph was the most frequently used for presentation type through all periods.

의류상품 이미지에 의한 의복구매과정 모형 연구 (A Study on a Clothing Purchase Process Model Using Images of Clothing Merchandise)

  • 정은영;이신재
    • 한국의류학회지
    • /
    • 제18권5호
    • /
    • pp.749-764
    • /
    • 1994
  • It was assumed that a consumer forms images of all the factors related to clothing merchandise such as trademarks, stores, products and prices that he/she perceives in the market and those images deforming his/her preference for a particular piece of clothes and intention of purchase. Under this assumption, this research was designed to find out important factors of clothes that help a consumer form an image of the clothes, among other attributes of the merchandise, and how this image is related to the existing extraneous variables such as the trademark image, the consumer's self image, the price, etc. in leading the consumer to purchase the particular clothes in the end. In the empirical research, a preliminary survey was conducted to select brands of womenswear that were suitable for this study and as the result, 16 brands were chosen. Then one trademark, one store and two products from each of the 16 brands were selected. With these materials, 32 stimulus sheets were prepared, and each of them was composed of 3 photos of a brand's catalog and logo, the interior of a selected store that carried products of the brand, and formal suits selected from each brand's spring/summer 1993 collections. Subjects were 460 women in the age groups of 20-50s who live in Seoul Metropolitan area. Each of the subjects was provided with a survey questionnaire and 16 stimulus sheets. The main findings of this research prove that consumers follow a certain selection process model when they purchase clothes: consumers, first, from images of merchandise based on the trademarks, stares, and products and those formed images work il.: medium variables and in the end they help the consumers decide whether to buy the products.

  • PDF

과수 및 가로수 병해충 방제를 위한 중소형 살포기의 성능실험 및 영상처리를 이용한 분석 (Performance Test and Image Processing Analysis of a Small and Medium Sized Sprayer for Pests Control for Fruit Trees and Roadside Trees)

  • 민병로;최진호;이규승;김웅;이대원
    • 생물환경조절학회지
    • /
    • 제20권2호
    • /
    • pp.101-108
    • /
    • 2011
  • 본 연구의 목적은 방제 작업을 하는데 있어서 과수농가 및 가로수의 병해충을 방제하기 위해 살포거리가 60m까지 살포할 수 있는 살포기를 개발하고 영상처리를 이용하여 성능실험 및 분석을 하는 것이다. 중소형 살포기의 성능을 알아보기 위해 살포기의 이동거리는 5m 간격으로 0~20m까지 5개의 실험구를 두었고 살포거리는 10~60m까지 6개의 실험구 총 30개의 실험구에 대한 영상 처리한 결과 다음과 같은 결과를 얻었다. 중소형 살포기가 이동하면서 흡수지에 살포한 데이터를 이치화 시킨 후 평균한 경우 전 구간에서 살포가 잘 된 것을 볼 수 있었고 살포기가 정지하면서 살포량이 낮게 나타났다. 중소형 살포기가 0.3m/s로 이동하면서 살포 한 경우 15m 이동한 경우 살포기에서 30m 떨어진 용지에 이치화 값이 121로 가장 살포가 높게 나타났다. 이동거리별 이치화 비율은 중소형 살포기가 출발하면서 살포한 경우가 살포율이 높게 나타났다. 이치화 결과에 의해 전구간에서 일정한 분포율을 나타냈다. 높게 나온 구간은 방제기가 출발한 점에서는 20m에서 50.23%, 방제기가 5m이동한 20m구간에서 50.21%, 10m 이동한 경우는 30m 구간에서 51.17, 15m 이동한 경우는 30m 구간에서 52.64%, 방제기가 정지하면서 살포한 경우는 20m의 구간에서 51.84%로 높게 나타났다. 이동거리별 검정색 비율은 방제기로부터 40m까지의 거리까지 살포가 원활하게 이루어지는 것으로 나타났다. 방제기가 15m 이동한 경우 60m의 구간에서 6.79%로 가장 낮게 나타났다.

Brain Angiography 검사 시 Scan Time에 따른 Contrast Media Volume에 대한 연구 (Study on the Contrast Media Volume according to Scan Time during Brain Angiography Examination)

  • 이주련;김동현
    • 한국방사선학회논문지
    • /
    • 제15권1호
    • /
    • pp.29-35
    • /
    • 2021
  • 본 연구의 목적은 주기적으로 follow up CT를 촬영하는 뇌출혈 환자에게 조영제의 양을 줄임으로써 줄이기 전과 후의 영상의 화질의 차이가 있는지에 관하여 조사하는 것이었고, 줄이기 전과 후의 영상을 검사한 후 MMWP 프로그램을 이용하여 각각의 혈관 위치에 ROI를 설정하여 화질을 평가하였다. 먼저 Rt. CCA, Lt.CCA. Rt.MCA, Lt.MCA, Basilar artery에 각각 ROI를 잡았다. 둘째, 잡은 ROI에 대한 평균값과 표준편차값을 구하였다. 셋째, 구해진 평균값과 표준편차 값을 통하여 SNR과 CNR을 구하였다. 구하여진 SNR값과 CNR값을 T-test 통계를 구한 결과 SNR에 대한 결과 값은 Rt.CCA 0.765, Lt.CCA 0.871, Rt.MCA 0.343, Lt.MCA 0.235, Basilar artery 0.916이며, CNR에 대한 결과 값은 Rt.CCA 0.088, Lt.CCA 0.069, Rt.MCA 0.818, Lt.. MCA 0.579, Basilar artery 0.878로 나타났다. 구해진 SNR값과 CNR값을 통하여 통계를 구한 결과값이 조영제를 줄이기 전과 후의 영상의 화질에 차이가 없는 것으로 나타났다. 따라서 본 연구가 주기적으로 CT검사를 하는 환자들에게 조영제에 대한 부담이 덜어질 수 있는 지표가 되기를 바랍니다.

기계시각에 의한 풋고추 자동 선별시스템 개발 (Development of Automatic Sorting System for Green pepper Using Machine Vision)

  • 조남홍;장동일;이수희;황헌;이영희;박종률
    • Journal of Biosystems Engineering
    • /
    • 제31권6호
    • /
    • pp.514-523
    • /
    • 2006
  • Production of green pepper has been increased due to customer's preference and a projected ten-year boom in the industry in Korea. This study was carried out to develop an automatic grading and sorting system for green pepper using machine vision. The system consisted of a feeding mechanism, segregation section, an image inspection chamber, image processing section, system control section, grading section, and discharging section. Green peppers were separated and transported using a bowl feeder with a vibrator and a belt conveyor, respectively. Images were taken using color CCD cameras and a color frame grabber. An on-line grading algorithm was developed using Visual C/C++. The green peppers could be graded into four classes by activating air nozzles located at the discharging section. Length and curvature of each green pepper were measured while removing a stem of it. The first derivative of thickness profile was used to remove a stem area of segmented image of the pepper. While pepper is moving at 0.45 m/s, the accuracy of grading sorting for large, medium and small pepper are 86.0%, 81.3% and 90.6% respectively. Sorting performance was 121 kg/hour, and about five times better than manual sorting. The developed system was also economically feasible to grade and sort green peppers showing the cost about 40% lower than that of manual operations.