• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.2 no.2
• /
• pp.64-70
• /
• 1988

In many applications of inverter system, it is desirable to obtain an AC output voltage with variable frequency and amplitude. For the variable-speed AC motor drive, the system is one major area of application for the variable-frequency inverter. V ariable~voltage variable-frequency sinusoidal output in three-phase inverter is possible by employing the techniques developed. In this paper, the technique of particular harmonics elimination(PHE) in three-phase PWM inverter-output waveforms is introduced. The required switching patterns are determind on personal computer. Results are stored in look-up table in EPROM and used to control the switching of the inverter devices. The experimental results indicate that the loss in an induction motor is minimized to a degree by using this algorithm. The proposed PWM pattern is effective not only to the induction motor but also to the other electromagnetic machine such as Voltage Regulator, UPS.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.99-104
• /
• 2011

In this paper the approach of neural network was proposed which detects a variety of defects in the molded parts. In an attempt to improve the response of the system, It is designed to minimize the use of memory via LookUp table in software. The goal of these methods was to extract the features of samples in learning of neural networks, overcoming the algorithms of defects detection and classification. Through the learning of 500 sample patterns of molded parts, defects of 3% molded parts was detected and classified as the incorrect diameter parts. We expect that proposed approach is an effective alternative to save test time and cost for defect detection of a fine pattern within the molded parts.

• Korean Journal of Remote Sensing
• /
• v.32 no.1
• /
• pp.67-71
• /
• 2016

The surface reflectance is essential to retrieval various indicators related land properties such as vegetation index, albedo and etc. In this study, we estimated surface reflectance using Himawari-8 / Advanced Himawari Imager (AHI) channel data. In order to estimate surface reflectance from Top of Atmosphere (TOA) reflectance, the atmospheric correction is necessary because all of the TOA reflectance from optical sensor is affected by gas molecules and aerosol in the atmosphere. We used Second Simulation of a Satellite Signal in the Solar Spectrum Vector (6SV) Radiative Transfer Model (RTM) to correct atmospheric effect, and Look-Up Table (LUT) to shorten the calculation time. We verified through comparison Himawri-8 / AHI surface reflectance and Proba-V S1 products. As a result, bias and Root Mean Square Error (RMSE) are calculated about -0.02 and 0.05.

• Korean Journal of Remote Sensing
• /
• v.22 no.5
• /
• pp.379-383
• /
• 2006

Satellite imagery may contain large regions covered with atmospheric aerosol. A highresolution satellite imagery affected by non-homogenous aerosol cover should be processed for land cover study and perform the radiometric calibration that will allow its future application for Korea Multi-Purpose Satellite (KOMPSAT) data. In this study, aerosol signal was separated from high resolution satellite data based on the reflectance separation method. Since aerosol removal has a good sensitivity over bright surface such as man-made targets, aerosol optical thickness (AOT) retrieval algorithm could be used. AOT retrieval using Look-up table (LUT) approach for utilizing the transformed image to radiometrically compensate visible band imagery is processed and tested in the correction of satellite scenery. Moderate Resolution Imaging Spectroradiometer (MODIS), EO-l/HYPERION data have been used for aerosol correction and AOT retrieval with different spatial resolution. Results show that an application of the aerosol detection for HYPERION data yields successive aerosol separation from imagery and AOT maps are consistent with MODIS AOT map.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1577-1580
• /
• 2004

This paper proposes a design and implementation of transversal adaptive digital filter using LMS (Least Mean Squares) adaptive algorithm. The filter structure is based on Distributed Arithmetic (DA) which is able to calculate the inner product by shifting and accumulating of partial products and storing in look-up table, also the desired adaptive digital filter will be multiplierless filter. In addition, the hardware implementation uses VHDL (Very high speed integrated circuit Hardware Description Language) and synthesis using FLEX10K Altera FPGA (Field Programmable Gate Array) as target technology and uses Leonardo Spectrum and MAX+plusII program for overall development. The results of this design are shown that the speed performance and used area of FPGA. The experimental results are presented to demonstrate the feasibility of the desired adaptive digital filter.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.1
• /
• pp.1-6
• /
• 2012

In this paper, we present an obstacle avoidance control algorithm for mobile robots based on SFLC (single-input fuzzy logic controller) with an efficient fuzzy logic look-up table to replace the traditional complicated operation. This method achieves better performance than traditional methods in terms of efficiency. The output of a SFLC leads the robot to the target automatically although many obstacles on the path. Our experiments show that the robot has good performance in the view of path tracking and other efficiency.

• Korean Journal of Remote Sensing
• /
• v.34 no.1
• /
• pp.127-139
• /
• 2018

The GOCI atmospheric correction overland surfaces is essential for the time-series analysis of terrestrial environments with the very high temporal resolution. We develop an operational GOCI atmospheric correction method over land surfaces, which is rather different from the one developed for ocean surface. The GOCI atmospheric correction method basically reduces gases absorption and Rayleigh and aerosol scatterings and to derive surface reflectance from at-sensor radiance. We use the 6S radiative transfer model that requires several input parameters to calculate surface reflectance. In the sensitivity analysis, aerosol optical thickness was the most influential element among other input parameters including atmospheric model, terrain elevation, and aerosol type. To account for the highly variable nature of aerosol within the GOCI target area in northeast Asia, we generate the spatio-temporal aerosol maps using AERONET data for the aerosol correction. For a fast processing, the GOCI atmospheric correction method uses the pre-calculated look up table that directly converts at-sensor radiance to surface reflectance. The atmospheric correction method was validated by comparing with in-situ spectral measurements and MODIS reflectance products. The GOCI surface reflectance showed very similar magnitude and temporal patterns with the in-situ measurements and the MODIS reflectance. The GOCI surface reflectance was slightly higher than the in-situ measurement and MODIS reflectance by 0.01 to 0.06, which might be due to the different viewing angles. Anisotropic effect in the GOCI hourly reflectance needs to be further normalized during the following cloud-free compositing.

• Korean Journal of Remote Sensing
• /
• v.23 no.1
• /
• pp.7-14
• /
• 2007

Atmospheric correction is one of critical procedures to extract quantitative information related to biophysical variables from hyperspectral imagery. Most atmospheric correction algorithms developed for hyperspectral data have been based upon atmospheric radiative transfer (RT) codes, such as MODTRAN. Because of the difficulty in acquisition of atmospheric data at the time of image capture, the complexity of RT model, and large volume of hyperspectral data, atmospheric correction can be very difficult and time-consuming processing. In this study, we attempted to develop an efficient method for the atmospheric correction of EO-1 Hyperion data. This method uses the pre-calculated look-up-table (LUT) for fast and simple processing. The pre-calculated LUT was generated by successive running of MODTRAN model with several input parameters related to solar and sensor geometry, radiometric specification of sensor, and atmospheric condition. Atmospheric water vapour contents image was generated directly from a few absorption bands of Hyperion data themselves and used one of input parameters. This new atmospheric correction method was tested on the Hyperion data acquired on June 3, 2001 over Seoul area. Reflectance spectra of several known targets corresponded with the typical pattern of spectral reflectance on the atmospherically corrected Hyperion image, although further improvement to reduce sensor noise is necessary.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.5
• /
• pp.297-304
• /
• 2016

When a control algorithm is developed to protect automotive compressor surges, the simulation model typically selects an empirically determined look-up table. However, it is difficult for a control oriented empirical model to show surge characteristics of the super charger. In this study, a dynamic supercharger model is developed to predict the performance of a centrifugal compressor under dynamic load follow-up. The model is developed using Simulink$^{(R)}$ environment, and is composed of a compressor, throttle body, valves, and chamber. Greitzer's compressor model is used, and the geometric parameters are achieved by the actual supercharger. The simulation model is validated with experimental data. It is shown that compressor surge is effectively predicted by this dynamic compressor model under various operating conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12C
• /
• pp.1231-1238
• /
• 2005

This paper presents a new fast encoding algorithm for image vector quantization that incorporates the partial distances of multiple features with a multidimensional look-up table (LUT). Although the methods which were proposed earlier use the multiple features, they handles the multiple features step by step in terms of searching order and calculating process. On the other hand, the proposed algorithm utilizes these features simultaneously with the LUT. This paper completely describes how to build the LUT with considering the boundary effect for feasible memory cost and how to terminate the current search by utilizing partial distances of the LUT Simulation results confirm the effectiveness of the proposed algorithm. When the codebook size is 256, the computational complexity of the proposed algorithm can be reduced by up to the $70\%$ of the operations required by the recently proposed alternatives such as the ordered Hadamard transform partial distance search (OHTPDS), the modified $L_2-norm$ pyramid ($M-L_2NP$), etc. With feasible preprocessing time and memory cost, the proposed algorithm reduces the computational complexity to below the $2.2\%$ of those required for the exhaustive full search (EFS) algorithm while preserving the same encoding quality as that of the EFS algorithm.