• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1714-1717
• /
• 1997

A human operator is able to perform some tasks smoothly with force feedvack for the teleoperation or a virtual device in a the virtual environments. This paper describes a virtual force generation method with which operator can feel the interactive force between virtula robot and artificial environments. A virtual force generation algortihm is applied to generate the contact force at the arbitrary point of virtual robot, and the virtual force is displayed to the human operator via a tendon master arm consisted with 3 motors. Some experiments has beencarried out to verify the effectiveness of the force generation algorithm and usefulness of the developed backdrivable master arm.

• 문화기술의 융합
• /
• 제7권1호
• /
• pp.662-667
• /
• 2021

진동 햅틱 피드백은 최신 터치 디스플레이의 주요한 기능으로, 화면의 인터페이스와 상호 작용할 때 사용자의 조작성 및 몰입감을 크게 향상시킨다. 본 연구에선 정전기력 기반의 메커니즘을 적용하여 강한 진동 출력을 생성할 수 있으면서도, 얇은 평판 타입으로 제작이 가능하여 중대형 디스플레이의 뒷면에 탑재하기에 적합한 진동 햅틱 액추에이터를 제안하고자 한다. 제안된 액추에이터는 방사형 판스프링에 매달려 전기적으로 접지된 Mass를 이격 되어 있는 상하의 전극에 의해 정전기력으로 상하로 교번하여 진동력을 증폭시킬 수 있는 구조로 개발되었다. 성능평가 결과, 개발된 액추에이터가 2개 내장된 Bar-Type 모듈에서 170 Hz에서 최대 3.3g의 우수한 진동 출력을 보여, 중대형 터치 디스플레이에서 햅틱 피드백 제공에 대한 가능성이 확인되었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.509-512
• /
• 2013

본 논문은 산업용 로봇을 위한 힘 피드백 제어는 사람의 감각을 기반으로 한 작업을 대체하여 구현하기에 적합한 연마 시스템을 제안하였다. 기존 연마작업의 표면 연마, 비드처리, 기계 가공 디버링 등의 공정은 그 복잡성에서 자동화가 가장 곤란하다고 인식되어 주로 인력에 의존 해왔다. 본 연구는 연마 공구를 파지시킨 힘 제어 로봇에 의한 자동 연마 시스템의 구축을 위한 다축로봇 기반의 힘 센서로부터 신호 피드백 제어 방식의 특성을 파악하고 연마 공정에 적응성을 검증했다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.13-17
• /
• 1990

In this paper we propose the force controller using a neural network for a redundant manipulator. Jacobian transpose matrix of a redundant manipulator constructed by a neural network is trained by using a feedback torque as an error signal. If the neural network is sufficiently trained well, the kinematic inaccuracy of a manipulator is automatically compensated. The effectiveness of the proposed controller is demonstrated by computer simulation using a three-link planar robot.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.803-806
• /
• 1997

In this paper, a force estimation method is proposed for the sensorless force control. For this, a disturbance observer is applied to each joint of an n degrees of freedom manipulator to obtain a simple equivalent robot dynamics(SERD) being represented as an n independent double integrator system. To estimate the output of disturbance observer in the absence of external force, the observer estimator is designed, where the uncertain parameters of the robot manipulator are adjusted by gradient method to minimize the output between the disturbance observer and the observer estimator. When the external force is exerted, the external force is estimated using the difference between the output of disturbance observer which include the external torque signal and that of observer estimator. And then, a force controller is designed for force feedback control employing the estimated force signal. To verify the effectiveness of the proposed force estimation method, several numerical examples are illustrated for the 2-axis planar type robot manipulator.

• 대한전기학회논문지
• /
• 제40권2호
• /
• pp.207-216
• /
• 1991

In the case that the robot manipulator should respond to the variance and uncertainty of the environment in performing preforming precision tasks, it is indispensable that the robot utilizes the various sensors for intrlligence. In this paper, the robot force control method is implemented with a force/torque sensor, two personal computers, and a PUMA 560 manipulator for performing the various application tadks. The hybrid position/force control method is used to control the force and position axis separately. An interface board is designed to read the force/torque sensor output into the computer. Since the two computers should exchange the information quickly, a common memory board is designed. Before the algorithms of application tasks are developed, the basic force commands must be supplied. Thus, the MOVE-UNTIL command is used at the discrete time instant and, the MOVE-COMPLY is used at the continuous time instant for receiving the force feedback information. Using the two basic force commands, three application algorithms are developed and implemented for edge-following, insertion, and grinding tasks.

• 제어로봇시스템학회논문지
• /
• 제4권4호
• /
• pp.464-478
• /
• 1998

In teleoperation, it is important for an operator to feel as if he really were in a distant place. To realize this objective, the various information from a remote site must be presented to the operator. Even though tactile information is very important to efficiently execute a task, it is not yet sufficiently provided for the operator. In this paper, we propose the new mechanism that can provide the more dexterous tactile information to the operator This device utilizing the electromagnetic force is designed to be compact and light enough to be attached to the fingerpad, and designed to be controlled continuously. The magnetic circuit is derived by the probable flux paths method in order to take forces at any given dimension. An optimization technique is also proposed to maximize the tactile force that humans can perceive under the same conditions. The objective function is formulated as maximizing displacements indented on the fingerpad, considering the mechanism of human tactile perception. The optimization formulation is subject to the geometric and rising temperature constraints in the coil. It is demonstrated that, by optimization, the tactile force increases by 24%, compared with that obtained from the initial design.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.438-443
• /
• 2003

In this paper, we propose a control algorithm for two-wheel mobile robot that can move the rider to his or her command and autonomously keep its balance. The control algorithm is based on a mixed $H_2/H_{\infty}$ control scheme. In this control problem the main issue is to move the rider while keeping its balance in the presence of disturbances and parameter uncertainties. The disturbance force caused by uneven road surfaces and the uncertainty due to different rider's heights are considered. To this end we first consider a state feedback controller as a basic framework. Secondly, we obtain the state feedback gain $K_2$ minimizing the $H_2$ norm and the state feedback gain $K_{\infty}$ minimizing the $H_{\infty}$ norm over the whole range of parameter uncertainty. Finally, we select mixed $H_2$/$H_{\infty}$ state feedback controller K as the geometric mean of $K_2$ and $K_{\infty}$. Simulation results show that the mixed $H_2/H_{\infty}$ state feedback controller combines the effects of the optimal $H_2$ state feedback controller and robust $H_{\infty}$ controller state feedback controller efficiently in the presence of disturbance and parameter uncertainty.

• 한국엔터테인먼트산업학회논문지
• /
• 제14권3호
• /
• pp.363-373
• /
• 2020

본 연구는 뇌졸중 환자에게 엔터테인먼트요소가 가미된 가상현실과 시각적 되먹임 보행 훈련 프로그램을 병행하여 보행능력과 삶의 질을 향상시키고자 하였다. 이에 휘돌림 보행을 하는 뇌졸중 환자 10명을 선정하여, 가상현실과 힘판을 통한 시각적 되먹임 트레드밀보행훈련을 일일 30분씩, 주5회, 5주간 총 25회 실시하였다. 이러한 보행훈련의 효과를 알아보기 위해 관절가동범위검사, 근활성도 검사, 버그 균형 척도(BBS), 보행분석, 삶의 질(SS-QOL) 평가를 중재 전·후 시행하였다. 본 연구결과, 보행 흔듦기 시기에 마비측 관절가동범위와 근활성도, 동적균형능력, 보행능력, 삶의 질이 중재 후 통계학적으로 유의하게 차이가 있었다(p<0.05). 본 연구결과를 통해 본 연구의 보행훈련이 휘돌림 보행을 하는 뇌졸중 환자의 발처짐, 근활성도, 동적 균형 및 보행능력을 향상시키고, 이로 인한 삶의 질도 개선하는 것을 알 수 있었다. 따라서 휘돌림 보행을 하는 뇌졸중 환자의 보행능력 향상과 삶의 질 개선을 통한 라이프케어증진을 위해 가상현실과 힘판을 통한 시각적 되먹임 트레드밀보행훈련 프로그램 적용을 권장한다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권6호
• /
• pp.342-350
• /
• 2003

In this paper, a levitation controller for a magnetic levitation(MagLev) system is designed and implemented. The target to be controlled is PEM(permanent and electromagnet) type with 4-corners levitation which is open-loop unstable, highly non-linear and time-varying system. The digital control system consists of a VME-based CPU board, AD board, PU board, 4-Quadrant chopper, and gap sensor, accelerometer as feedback sensors. In order to estimate the velocity of the magnet, we used 2nd-order state observer with acceleration and gap signal as input and output, respectively. Using the estimated states, a state feedback control law for the plant is designed and the feedback gains are selected by using the pole-placement method. The designed controller is experimentally validated by step-type gap reference change and force disturbance test.