• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1994-1999
• /
• 2003

This paper discusses dynamic characteristics of motion of a pair of multi-degrees of freedom robot fingers executing grasp of a rigid object and controlling its orientation with the aid of rolling contacts. In particular, the discussions are focused on a problem of gain-tuning of sensory feedback signals proposed from the viewpoint of sensorymotor coordination, which consist of a feedforward term, a feedback term for controlling rotational moment of the object, and another term for controlling its rotational angle. It is found through computer simulations of the overall fingersobject dynamics subject to rolling contact constraints that some dynamic characteristics of torque-angular velocity relation may play an important role likely as reported by experimental results in muscle physiology and therefore selection of damping gains in angular velocity feedback depending on the guess of object mass is crucial. Finally, a guidance of gain-tuning in each feedback term is suggested and its validity is discussed by various computer simulations.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.3 s.108
• /
• pp.283-290
• /
• 2006

This study is concerned with static and sinusoidal disturbance rejection for a single periodic input disturbance with known period. In the area of active elimination of a disturbance force, the control input should have two different kinds of gains: one is to deliver a stable control and the other is a force component to cancel the external disturbance force. In this paper we employ a simple state feedback control law to make the balance beam stable and employ a linear observer to estimate the states which represent the external disturbance force components. Simulation results verify our proposed control method to reject a static and sinusoidal disturbance force.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2525-2527
• /
• 2002

The objective of this paper is to design a force feedback controller for bilateral control of a master-slave manipulator system using adaptive fuzzy sliding mode control. In a bilateral control system, the motion of the master device is followed by slave the one. While the force applied to the slave is reflected on the master. In this paper a proposed controller applied to the system. Adding a switching control term to the input robustness is improved. Also the knowledge of the system dynamics is not needed. The computer simulation results show the performance of the proposed adaptive fuzzy sliding mode controller.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.1
• /
• pp.92-106
• /
• 1990

Active compliance is often used in the control of robot manipulators for the implementation of complex tasks such as assembly, multi-finger fine motion, legged-vehicle adaptive control,etc. This technique balances the interactive force between the manipulator tip and its working environment with its position and velocity errors to achieve the operation of a damped spring. This paper investigates the effecft of passive compliance on system stability with regard to force feedback implementation for actively compliant motion. Usually it is understood that accurate position control require a stiff system. However, theoretical examination of control experiments on a legged suspension vehicle suggests that, if the control includes discrete-time force feedback, some passive compliance is necessssary at the legs of the vehicle for system stability. This can be an important factor to bl considered in manipulator design and control. A theoretical analysis, numerical simulation, and experimental result, confirming the above conclusion, are introduced in this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1131-1135
• /
• 2004

In the virtual environment, force feedback to the human operator makes virtual experiences more realistic. However, the force feedback using active actuators such as motors can make the system active and sometimes unstable. To ensure the safe operation and enhance the haptic feeling, stability should be guaranteed. Both motors and brakes are commonly used for haptic device. A brake can generate a torque only against its rotation, but it is intrinsically stable. Consequently, motors and brakes are complementing each other. In this research, a two degree-of-freedom (DOF) haptic device equipped with both motors and brakes has been developed to provide better haptic effects. Each DOF is actuated by a pair of motor and brake. Modeling of the environment and the control method are needed to utilize both actuators. For various haptic effects, contact with the virtual wall and representation of friction effect are extensively investigated in this paper. It is shown that the hybrid haptic system is more suited to some applications than the motor-based active haptic system.

• Journal of the Korean Mathematical Society
• /
• v.61 no.3
• /
• pp.565-602
• /
• 2024

We study the collective behaviors of two second-order nonlinear consensus models with a bonding force, namely the Kuramoto model and the Cucker-Smale model with inter-particle bonding force. The proposed models contain feedback control terms which induce collision avoidance and emergent consensus dynamics in a suitable framework. Through the cooperative interplays between feedback controls, initial state configuration tends to an ordered configuration asymptotically under suitable frameworks which are formulated in terms of system parameters and initial configurations. For a two-particle system on the real line, we show that the relative state tends to the preassigned value asymptotically, and we also provide several numerical examples to analyze the possible nonlinear dynamics of the proposed models, and compare them with analytical results.

• Journal of Welding and Joining
• /
• v.24 no.6
• /
• pp.13-20
• /
• 2006

Resistance spot welding is widely used for joining sheet metals in the automotive manufacturing process. Recently, servo-gun is used to increase the productivity and precise control the acting force. However, force control mechanisms have not been investigated with servo-guns until now. In this paper, it is proved that servo-motor current is proportional to torque and by experiment, experimental equation between servo-motor current and electrode force was derived. Algorithm for feedback control of electrode force was suggested using current measurement. In addition, applying soft touch method to this system the impact between electrode and specimen, which is the problem of air gun, could be reduced. Indentation made the force decrease in holding time of resistance spot welding. In order to overcome this problem, force compensation using the servo gun was used and it improved weld strength in good welding current range.

• Structural Engineering and Mechanics
• /
• v.52 no.5
• /
• pp.903-918
• /
• 2014

Large space structures may have resonant low eigenvalues and often these appear with closely-spaced natural frequencies. Owing to the coupling among modes with closely-spaced natural frequencies, each eigenvector corresponding to closely-spaced eigenvalues is ill-conditioned that may cause structural instability. The subspace to an invariant subspace corresponding to closely-spaced eigenvalues is well-conditioned, so a method is presented to design the feedback control law of intelligent structures with closely-spaced eigenvalues in this paper. The main steps are as follows: firstly, the system with closely-spaced eigenvalues is transformed into that with repeated eigenvalues by the spectral decomposition method; secondly, the computation for the linear combination of eigenvectors corresponding to repeated eigenvalues is obtained; thirdly, the feedback control law is designed on the basis of the system with repeated eigenvalues; fourthly, the system with closely-spaced eigenvalues is regarded as perturbed system on the basis of the system with repeated eigenvalues; finally, the feedback control law is applied to the original system, the first order perturbations of eigenvalues are discussed when the parameter modifications of the system are introduced. Numerical examples are given to demonstrate the application of the present method.

• Journal of muscle and joint health
• /
• v.18 no.1
• /
• pp.16-27
• /
• 2011

Purpose: The purpose of this study was to investigate the effects of a visual feedbackbased balance training, using force platform biofeedback, on the postural balance of elderly faller. Methods: Fifty one community-dwelling older adults (aged 66-88 years) with a recent history of fall participated in the study. Participants were randomized to an experimental group (EG, n=25) and to a control group (CG, n=26). The EG participated in training sessions three times/week for 6 weeks. Visual feedbackbased balance training with the a computerized force platform with visual feedback screen was used in the experimental group. Static balance (center of gravity) and dynamic balance (Functional reach test, Timed "Up & Go" test, Berg balance scale) were assessed before and after end of training. Results: A significant improvement in static balance and dynamic balance were demonstrated within the EG (p<.05), but not in the CG. Conclusion: Visual feedback-based balance training may be an effective intervention to improve postural balance of elderly fallers.

• Journal of Drive and Control
• /
• v.15 no.4
• /
• pp.39-47
• /
• 2018

Recently, as environmental regulations for earth-moving equipment have been tightening, advanced systems such as electronic control, have been introduced for energy savings. An IMV (Independent Metering Valve) consisting of four 2-way valves, is an electro-hydraulic control systems that provides more flexible controllability, and potential for energy savings in excavators, when compared to the conventional 4-way spool valve system. To fully maximize use of an IMV, the bi-directional flow control valve that can regulate a large amount of flow in both directions, should be adopted. The hydraulic circuit of an IMV applied to an excavator from an overseas construction equipment company, reveals the flow control valve with the compound of proportional solenoid valve for first stage, and 2-way spool valve for the second stage. Moreover, the two spools are interconnected by a feedback spring, presumed to compensate for flow force acting on the second stage spool. This paper addresses the static analysis of flow control valve in an IMV to investigate the improvement of robustness, against flow force by the feedback spring. From the steady-state analysis of flow control valve model, it can be concluded that the feedback spring facilitates maintaining linearity of spool displacement for control input, and relatively constant flow for load disturbance.