• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.8
• /
• pp.844-851
• /
• 2005

The purpose of this study was to determine feasibility of application of regenerated or recycled $TiO_2$ on the successive treatment of Cu(II)-EDTA. The recovery of copper, the reuse of $TiO_2$ and the assessment of acute toxicity was studied in the total eight successive photocatalytic reactions. Aqueous solution of $10^{-4}\;M$ Cu(II)-EDTA was treated using an illuminated $TiO_2$ at pH 6 in a circulating reactor. Two different procedures were applied in the reuse of $TiO_2$: i) recycle of $TiO_2$ without acid wash ii) regeneration of $TiO_2$ with acid wash to remove adsorbed copper in a previous experiment. The averaged decomplexation rate constant($k'_{obs}$) of Cu(II)-EDTA in recycle of $TiO_2$ without acid wash was approximately 45% less than that in regeneration of $TiO_2$ with acid wash. Removal of Cu(II) was near complete after 180 minutes in the total eight successive photocatalytic reactions using the regenerated $TiO_2$ after acid wash. In contrast, removal of Cu(II) was minimum at total fifth successive photocatalytic oxidation using the recycled $TiO_2$ without arid wash. The recovered $TiO_2$ was approximately 86% in average in each procedure. The recovered Cu(II) was 67.9% in average. The acute relative toxicity of the treated water rapidly declined at an initial reaction time up to 60 minutes but little declination was observed after 60 minutes due to little degradation of DOC. Relative toxicity of treated water using the recycled $TiO_2$ without acid wash we some what well correlated with the concentration of dissolved Cu(II). From this work, it is suggested that Cu(II)-EDTA can be effectively treated using an integrated cyclic photocatalytic oxidation with recovery of $TiO_2$ and Cu(II).

• The Korean Journal of Nuclear Medicine
• /
• v.33 no.1
• /
• pp.65-75
• /
• 1999

Purpose: The aim of this study is to demonstrate the feasibility of 2-[fluorine-18] fluoro-2-deoxy-D-glucose (F-18-FDG) whole body scan (FDG W/B Scan) using dual-head gamma camera equipped with ultra high energy collimator in patients with various cancers, and compare the results with those of coincidence imaging. Materials and Methods: Phantom studies of planar imaging with ultra high energy and coincidence tomography (FDG CoDe PET) were performed. Fourteen patients with known or suspected malignancy were examined. F-18-FDG whole body scan was performed using dual-head gamma camera with high energy (511 keV) collimators and regional FDG CoDe PET immediately followed it Radiological, clinical follow up and histologic results were correlated with F-18-FDG findings. Results: Planar phantom study showed 13.1 mm spatial resolution at 10 cm with a sensitivity of 2638 cpm/MBq/ml. In coincidence PET, spatial resolution was 7.49 mm and sensitivity was 5351 cpm/MBq/ml. Eight out of 14 patients showed hypermetabolic sites in primary or metastatic tumors in FDG CoDe PET. The lesions showing no hypermetabolic uptake of FDG in both methods were all less than 1 cm except one lesion of 2 cm sized metastatic lymph node. The metastatic lymph nodes of positive FDG uptake were more than 1.5 cm in size or conglomerated lesions of lymph nodes less than 1cm in size. FDG W/B scan showed similar results but had additional false positive and false negative cases. FDG W/B scan could not visualize liver metastasis in one case that showed multiple metastatic sites in FDG CoDe PET. Conclusion: FDG W/B scan with specially designed collimators depicted some cancers and their metastatic sites, although it had a limitation in image quality compared to that of FDG CoDe PET. This study suggests that F-18-FDG positron imaging using dual-head gamma camera is feasible in oncology and helpful if it should be more available by regional distribution of FDG.

• Economic and Environmental Geology
• /
• v.48 no.6
• /
• pp.491-500
• /
• 2015

Batch experiments were performed to determine the feasibility of the surfactant-enhanced soil washing process at various washing conditions for the Kuwait soil seriously contaminated with the crude oil. The soil was sampled at a dried oil pond in Kuwait and its average TPH concentration was 223,754 mg/kg, which was too high to apply the conventional remediation process. Nine commercialized non-ionic surfactants were used for the batch experiment to measure the surfactant solubility for the crude oil because it was reported that they have worked for the soil remediation. Among them, three surfactants having high crude oil solubility were used for the soil washing experiment. From the result of batch experiment, 5% TritonX-100 washing solution showed the highest TPH removal efficiency (67%) for the crude oil contaminated soil. However, because the residual TPH concentration in the washed soil was still higher than the clean-up level in Kuwait (10,000 mg/kg), the repeated soil washing was performed. After five washings with 2% surfactant solution, the cumulative TPH removal efficiency was higher than 96% and the residual TPH concentration in the soil went down below the clean-up level. To measure the desorption capacity of TritonX-100 remained in the soil after the soil washing, the silica beads and the soil were washed five times with 2% TritonX-100 surfactant solution and then they were washed again with distilled water to detach the surfactant adsorbed on beads or soil. After five washings with surfactant solution, 7.8% and 19.6% of the surfactant was adsorbed on beads and soil, respectively. When additionally washed with distilled water, most of the residual surfactant were detached from beads and only 4.3% of surfactant was remained in soil. From the results, it was investigated that the surfactant-enhanced soil washing process with TritonX-100, Tergitol S-15-7, and Tergitol S-15-9 has a great capability for the remediation of the Kuwait soil seriously contaminated by crude oil (more than 220,000 mg/kg).

• Journal of Engineering Education Research
• /
• v.11 no.4
• /
• pp.11-18
• /
• 2008

Companies have been making considerable efforts to develop innovative products for better competitiveness in the market, however, the education curriculum for innovative product development (IPD) in domestic universities needs has not been well developed. The present study was intended to identify the needs of students and practitioners regarding teaching subjects, pedagogical methods, and industry-academia collaboration that can be reflected in the development of IPD education curriculum. Through a literature survey 46 IPD teaching subjects of 7 categories (planning, feasibility analysis, concept development, product design, manufacturing process design, production, and ethics & law) were selected. Opinions on the preferences and importances of the teaching subjects, pedagogical methods, and industry-academia collaboration were collected from 53 college students who took courses of product development and 36 practitioners working in product development. While the students preferred the balanced teaching of all the subject categories, the practitioners suggested planning and concept development be taught with high importance; 6 subjects (product development strategy, customer needs identification, market research, concept generation method, design ideation method, and ergonomic design) received high ratings of preference and importance. The students preferred the mix of various pedagogical methods (lecture, discussion, presentation, practice, and case study) and provided needs on each pedagogical method. Lastly, the students wanted an opportunity of learning through industry-academia collaboration and the practitioners provided ideas for mutual benefits between industry and academia. The needs of students and practitioners identified in the study can be effectively applied to develop a better IPD education curriculum.

• Korean Journal of Environment and Ecology
• /
• v.31 no.2
• /
• pp.252-265
• /
• 2017

This study aims to analyze the landscape ecological characteristics of green spaces within built up area of high density and evaluate the potential applicability of green patches, thereby introducing urban garden for generating green networks in residence areas. To this end, Yeoksam-Dong was selected as the site area since it is classified as both green initiative zone and alienated area of park service in Seoul. First, the current condition of green spaces in Yeoksam-Dong was identified by five categories: Street trees, private garden, public pocket garden, rooftop garden, and park. Then, the landscape index analysis through FRAGSTATS and connectivity assessment via multi-buffer zone analysis were carried out for analyzing the green networks and evaluating the potential value of green space. The results showed that the degree to which green areas in the site were distributed is arranged in the order of street tree, private garden, public pocket garden, park, and rooftop garden. In case of the street trees whose total core area (TCA, $1,618m^2$) is as high as the park's ($1,128m^2$). Private garden has potential for green network in built up area of high density by gardening since the shape of the patches are irregular (ED = 78.1m/ha) and the average distance among the patches is close (ENN=33.9m). Public pocket garden has also potential for gardening according to the result that it was found to be distributed evenly (LPI=5.7%, SHEI=0.9) with exposing external disturbance ($TCA=66m^2$). For the green network, 84% of all the study site is covered by small green network in 50m butter range of connected green area. The effect of green network was expected through gardening in public pocket garden (27%) and street tree (26%). Accordingly, it is encouraged to actively utilize street tree, private gardens, and rooftop gardens and to establish the urban gardens like local-based community gardens in public pocket garden where a variety of activities can be carried out near residential areas. By doing so, green networks can effectively be established in built up area with high density. The results of this study can contribute positively to fostering the creation of various types of urban gardens.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.599-604
• /
• 2004

Implantable flexible sensor using polymer/metal multilayer processing technique for telemetrical real-time blood pressure monitoring is presented. The realized sensor is mechanically flexible, which can be less invasively implanted and attached on the outside of blood vessel to monitor the variation of blood pressure. Therefore, unlike conventional detecting methods which install sensor on the inside of vessel, the suggested monitoring method can monitor the relative blood pressure without injuring blood vessel. The major factor of sudden death of adults is a disease of artery like angina pectoris and myocardial infarction. A disease of circulatory system resulted from vessel occlusion by plaque can be preventable and treatable early through continuous blood pressure monitoring. The procedure of suggested new method for monitoring variation of blood pressure is as follows. First, integrated sensor is attached to the outer wall of blood vessel. Second, it detects mechanical contraction and expansion of blood vessel. And then, reader antenna recognizes it using telemetrical method as the relative variation of blood pressure. There are not any active devices in the sensor system; therefore, the transmission of energy and signal depends on the principle of mutual inductance between internal antenna of LC resonator and external antenna of reader. To confirm the feasibility of the sensing mechanism, in vitro experiment using silicone rubber tubing and blood is practiced. First of all, pressure is applied to the silicone tubing which is filled by blood. Then the shift of resonant frequency with the change of applied pressure is measured. The frequency of 2.4 MHz is varied while the applied pressure is changed from 0 to 213.3 kPa. Therefore, the sensitivity of implantable blood pressure is 11.25 kHz/kPa.

• Radiation Oncology Journal
• /
• v.22 no.4
• /
• pp.288-297
• /
• 2004

Puporse: The aims of this study were to evaluate the change of $[^18F]fluoromisonidazole$($[^18F]FMISO$) uptake in C3H mouse squamous cell carcinoma-VII (SCC-VII) treated with mild hyperthermia ($42^{circ}C$) and nicotinamide and to assess the biodistribution of the markers in normal tissues under similar conditions. Methods and Materials: $[^18F]FMISO$ was producedby our hospital. Female C3H mice with a C3H SCC-VII tumor grown on their extremities were used. Tumors were size matched. Non-anaesthetized, tumor-bearing mice underwent control or mild hyperthermia at $42^{circ}C$ for 60 min with nicotinamide (50 mg/kg i.p. injected) and were examined by gamma counter, autoradiography and animal PET scan 3 hours after tracer i.v. injected with breathing room air, The biodistribution of these agents were obtained at 3 h after $[^18F]FMISO$ injection. Blood, tumor, muscle, heart, lung, liver, kidney, brain, bone, spleen, and intestine were removed, counted for radioactivity and weighed. The tumor and liver were frozen and cut with a cryomicrotome into 10- um sections. The spatial distribution of radioactivity from the tissue sections was determined with digital autoradiography. Results: The mild hyperthermia with nicotinamide treatment had only slight effects on the biodistribution of either marker in normal tissues. We observed that the whole tumor radioactivity uptake ratios were higher in the control mice than in the mild hyperthermia with nicotinamide treated mice for $[^18F]FMISO$ ($1.56{\pm}1.03$ vs. $0.67{\pm}0.30$; p=0.063). In addition, autoradiography and animal PET scan demonstrated that the area and intensity of $[^18F]FMISO$ uptake was significantly decreased. Conclusion: Mild hyperthermla and nicotinamide significantly improved tumor hypoxia using $[^18F]FMISO$ and this uptake reflected tumor hypoxic status.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.968-974
• /
• 2010

We assessed the feasibility of discrete wavelet transform (DWT) applied for the spectral processing to enhance the estimation performance quality of soil organic matters using visible-near infrared spectra and mapped their distribution via block Kriging model. Continuum-removal and $1^{st}$ derivative transform as well as Haar and Daubechies DWT were used to enhance spectral variation in terms of soil organic matter contents and those spectra were put into the PLSR (Partial Least Squares Regression) model. Estimation results using raw reflectance and transformed spectra showed similar quality with $R^2$ > 0.6 and RPD> 1.5. These values mean the approximation prediction on soil organic matter contents. The poor performance of estimation using DWT spectra might be caused by coarser approximation of DWT which not enough to express spectral variation based on soil organic matter contents. The distribution maps of soil organic matter were drawn via a spatial information model, Kriging. Organic contents of soil samples made Gaussian distribution centered at around 20 g $kg^{-1}$ and the values in the map were distributed with similar patterns. The estimated organic matter contents had similar distribution to the measured values even though some parts of estimated value map showed slightly higher. If the estimation quality is improved more, estimation model and mapping using spectroscopy may be applied in global soil mapping, soil classification, and remote sensing data analysis as a rapid and cost-effective method.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.287-294
• /
• 2021

In order to expand facility agriculture and reduce greenhouse construction costs in reclaimed land, a greenhouse foundation method that satisfies economic feasibility and structural safety at the same time is required. As an alternative, the allowable bearing capacity and settlement were reviewed when the DCM(Deep cement mixing) method was applied among the soft ground reinforcement methods. To examine the applicability of the greenhouse foundation, the allowable bearing capacity and settlement were calculated by applying the theory of Terzaghi, Meyerhof, Hansen, and Schmertmann. In case of the diameter of 800mm and the width and length of the foundation of 4m, the allowable bearing capacity was 179kN/m² and the settlement was 7.25mm, which satisfies the required bearing capacity and settlement standards. The calculation results were verified through FEM(Finite element method) analysis using the Mohr-Coulomb material model. The allowable bearing capacity was 169kN/m² and the settlement was 2.52mm. The bearing capacity showed an error of 5.6% compared to calculated value, and the settlement showed and error of 65.4%. Through theoretical calculations and FEM analysis, it was confirmed that the allowable bearing capacity and settlement satisfies the design criteria as a greenhouse foundation when the width and length of the foundation were 4m. Based on the verified design values, it is expected to be able to present the foundation design criteria for greenhouses through empirical tests such as bearing capacity tests and long-term settlement monitoring.

• Journal of dental hygiene science
• /
• v.18 no.6
• /
• pp.327-339
• /
• 2018

This study aimed to provide basic data for establishing the clinical basis for dental hygienist-led dental hygiene process of care by identifying multiple risk factors for self-support program participants in Gangneung city; we also compared oral health status and behavioral changes through customized oral health care. Four dental hygienists who were evaluated for degree of conformity provided dental hygiene process of care to eight self-support program participants who were selected as having an oral health risk among people in the self-support center. The clinical indicators measured during dental hygiene assessment and evaluation and behavioral changes due to dental hygiene intervention were compared and analyzed. With respect to clinical indicators, at the time of probe, the retention rate of patients with gingival bleeding decreased from 61.4% to 14.7% after intervention (p=0.004). Furthermore, the retention rate of patients with a periodontal pocket >4 mm decreased from 15.6% to 5.8% (p=0.001). The average modified O'Leary index of the patients improved from 23 to 40 (p=0.002). Previously, all eight subjects used the vertical or horizontal method of brushing; after dental hygiene care interventions regarding method and frequency of toothbrushing, use of oral care products, and individual interventions, they started using the rolling or Bass method of toothbrushing. Four of eight subjects reported using interdental toothbrushes after intervention. As a result of applying the change model to the transtheoretical behavior change of the subject, the result of strengthening the health behavior was confirmed. For promotion of oral health by the prevention-centered incremental oral health care system, dental hygienist-led dental hygiene management and maintenance is essential. It is thought that continuous research, such as for feasibility evaluation, cost benefit analysis, and preparation of legal systems, is needed to establish and activate dental hygiene management.