• Archives of Plastic Surgery
• /
• v.34 no.2
• /
• pp.169-175
• /
• 2007

Purpose: $Allevyn^{(R)}$(Smith & Nephew, England) is a type of polyurethane foam material with good wound discharge absorption. $Acticoat^{(R)}$(Smith & Nephew, England) is a silver coated dressing material which is effective in infected wound. The purpose of this study is to compare the effects of dry gauze, $Acticoat^{(R)}$ and $Allevyn^{(R)}$ on infected full-thickness wound healing in rat. Methods: One hundred and twenty rats were divided into 3 groups: group I(dressing with dry gauze, n=40), group II(dressing with $Allevyn^{(R)}$, n=40), group III(dressing with $Acticoat^{(R)}$, n=40). A $15{\times}15mm$ square full-thickness wound was made on the dorsum and left open for 24 hours. The size of wound defects were measured each dressing changes. The histological evaluation was performed on the 3rd day, 7th day, 14th day, 21th day. Results: After the wound was left open for 24 hours, typical findings of bacterial infection was observed. After the 7th day, group III showed larger area of epithelialization, smaller defect size compared to those of two other groups. Complete replacement by fibrotic scar tissue was observed in group III with no signs of inflammation on the 14th day. By day 21, the average defect size in group III was decreased from initial 100% to 3.63%. while in group I and II, it was decreased to 62.66% and 53.62%, respectively. Conclusion: $Acticoat^{(R)}$ is an effective tool in the treatment of infected wound.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.2
• /
• pp.159-166
• /
• 2011

This experiment was carried out to evaluate the effects of top dressing of nitrogen and harvest time on the growth, feed value and anthocyanin content for developing functional feed of colored barley. A colored barley cultivar, Boanchalbori, was tested in this experiment. Top dressing was applied at seven separate growth stages, regeneration time (RT), and intervals of 20, 30, 40, 50, 60, and 70 days after RT, and harvested at different time from 20 days after heading (DAH) to 40 DAH with 10 days interval in split plot design with three replications. Plant height was increasing with earlier top dressing, but not affected by harvest time. Percent dry matter was increasing with earlier top dressing and later harvests. Protein content was increased with later top dressing and harvests, but percent NDF, ADF and TDN was not significant. Total anthocyanin content was increased with earlier top dressing, included increasing C3G (cyanidin-3-glucoside) and delphinidin. The C3G and delphinidin were detected from 25 DAH and P3G (pelargonidin-3-g1ucoside), cyanidin and perlagonidin from 30 DAH. Their contents were increased significantly as harvest was delayed. This experiment provides some interesting results with respects to optimum top dressing and harvest time for the functional feed production of the colored barley.

• Archives of Plastic Surgery
• /
• v.32 no.4
• /
• pp.491-495
• /
• 2005

In partial thickness burn injuries, silver sulfadiazine cream 1%(SSD, $Silvadene^{(R)}$) is the most commonly used topical agent worldwide. But silver sulfadiazine cream 1% has no exudate absorption property. Usually after escar is removed from wound surface, $Silvadene^{(R)}$ is changed to saline wet gauze dressing to promote epithelization. $Aquacel^{(R)}$(ConvaTec, UK) is a 100% sodium carboxymethylcellulose Hydrofiber material. It absorbs exudates directly into the hydrofibers by vertical wicking which allows rapid uptake of liquid into the fibers. The absorbed exudate fluid can be distributed to the entire dressing rather than just over the wound surface, which results in larger fluid absorption capacity. From April, 2003 to July, 2004 a study was done with 40 patients who had variable partial thickness burns. $Aquacel^{(R)}$ dressing was compared in 21 cases to silver sulfadiazine cream 1% and saline wet gauze dressings in 19 cases. In the $Aquacel^{(R)}$ cases, the average healing time on the face was $5.36{\pm}1.69$ a day; on the hands was $8.46{\pm}2.15$ a day; and, on the neck was $6.0{\pm}2.0$ a day. With the $Silvadene^{(R)}$ and Saline wet gauze dressing, the average healing time on the face was $6.44{\pm}1.74$ a day; on the hands was $13.79{\pm}5.35$ a day; and, on the neck was $11.17{\pm}3.31$ a day. As a result, the $Aquacel^{(R)}$ group showed a shorter healing time compared to the $Silvadene^{(R)}$ and saline wet gauze dressing group and patients were satisfied because of less pain and improved comfort. In conclusion, $Aquacel^{(R)}$ is a better choice for partial thickness burn injuries because of shorter healing time, less pain and more confortable dressing.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.43-50
• /
• 2000

A CBN wheel was used for the highly efficient and precision grinding of the mold material(STD11). The grinding form accuracy by a CBN wheel is very excellent due to its low wheel wear, but grinding fragments resemble fine powders rather chips. A fine powders by this fragmentation can easily get attached to the wheel surface and therefore causing a loading. In order to prevent this fragmentation phenomena, the alumina stick is use to processing. Because the dressing with alumina stick should be interrupted for a processing, the automation of the processing and high productivity was very difficult. The investigation on the effect of Ultrasonic In-Process Dressing(ULID) on the grinding characteristics focuses in this Paper. This ULID method is that ultrasonic vibration in my Position of wheel is used to remove impurities on the wheel surface. Finally, the rate of surface roughness change in grinding by the ULID method was less than grinding without ultrasonic vibration. Loading phenomena by the ULID method were more prevented than grinding without ultrasonic vibration.

• Culinary science and hospitality research
• /
• v.21 no.4
• /
• pp.16-28
• /
• 2015

The purpose of this study, as a part of developing a new french dressing, was to present the best conditions to make improved kiwi dressing, suitable for the tastes of modern people, the processing and cooking methods of different ratios of green kiwi and gold kiwi have been sought to develop a new type of dressing, then its antioxidant have been defined, and used for producing kiwi dressing. Each 150g of different Kiwi purees, made based on the most preferable combinations from the pre-test were used for kiwi dressing, and thereafter its quality characteristics, and physical properties were investigated, as well as a sensory test was conducted. The highest viscosity of kiwi dressing was test sample GD2, and in general that of combining both types of kiwis were higher than that of either single kiwi. The sugar content was decreased by changing the Gold kiwi portion(p<0.05). The chromaticity in general increased with increases in the Gold kiwi portion, and a-value(brightness) and b-value(redness) of sample GD1 were the highest by -2.75 and 17.50(p<0.05). From the acceptability test, the highest overall acceptability was the dressing sample combining Gold kiwi and Green kiwi at a ratio of 1:1. Based on the study results, it is expected that the dressing, made of kiwi puree, mixing Green kiwi and Gold kiwi by 1:1 ratio, and adding 130g of edible oil, 50g of onion, 40g of sugar, and 5g of salt, would improve the quality and overall acceptability of the dressing.

• Journal of Industrial Technology
• /
• v.20 no.A
• /
• pp.169-178
• /
• 2000

The 4-point bending tests have been performed In order to estimate the effect of TIG-dressing on fatigue strength and fatigue characteristics quantitatively for non load-carrying fillet welded joints subjected to pure bending. As a result of fatigue tests, fatigue strengths of as-welded specimens have satisfied the grade of fatigue strength prescribed in specifications of korea, AASHTO and JSSC. Fatigue strength at 2 million cycles of TIG-dressing specimens have increased compared with as-welded specimens. As the result of beachmark tests, fatigue cracks occurred at several points, where the radius of curvature and flank angle in the weld bead toes were low, and grew as semi-elliptical cracks, then approached to fracture. As a result of finite element analysis, stress concentration factor in weld bead toes has closely related to the flank angle and radius of curvature, and between these, the radius of curvature has more largely affected in stress concentration factor than flank angle. As a result of fracture mechanics approaches, the crack correction factor of test specimens has largely affected on stress gradient correction factor in case a/t is below 0.4. From the relations between stress intensity factor range estimated from FEM analysis and fatigue crack growth rate, fatigue life has been correctly calculated.

• Archives of Plastic Surgery
• /
• v.45 no.1
• /
• pp.45-50
• /
• 2018

Background Free muscle flaps are a mainstay for reconstruction of distal third leg wounds and for large lower extremity wounds with exposed bone. However a major problem is the significant postoperative flap swelling, which may take months to resolve. We studied the efficacy and safety of immediate application of a vacuum assisted closure (VAC) dressing after a free muscle flap to the lower extremity. Methods Over a 19 months period, all consecutive free muscle flaps for lower extremity reconstruction at a Level I trauma center were evaluated prospectively for postoperative flap thickness, complications and flap survival. Immediate application of a VAC dressing was performed in 9 patients, while the flap was left exposed for monitoring in 8 patients. Results There was no statistically significant difference in flap survival between both cohorts. Mean flap thickness at postoperative day 5 for the VAC group was $6.4{\pm}6.4mm$, while flap thickness for the exposed flap group was $29.6{\pm}13.5mm$. Flap thickness was significantly decreased at postoperative day 5 for the VAC dressing group. Conclusions Immediate application of VAC dressing following free muscle flaps to the lower extremity does not compromise flap survival or outcomes and results in decreased flap thickness and a better aesthetic outcome.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.4
• /
• pp.594-609
• /
• 2020

This study investigated how experience of creative dressing tasks influences consumers' perceptions and behavior towards clothing consumption. Consumer creativity can solve several problems in consumption practices; however, few studies have analyzed it in the consumption context. This study adopted an action research method so that consumers could experience creative clothing consumption in their daily lives. In-depth interviews and participant observations were conducted on eight adults in their 20s and 30s. Participants had to dress creatively 10 times and recorded their creative fashion styles, the ideas they used, and their feelings during the tasks in a consumer diary. The main results were as follows. Participants regarded the meaning of creative dressing as a 'visually novel, transformative, and hiding the physical flaws'. Based on these characteristics of creative dressing, they showed many creative ideas by expanding the product usages or varying coordination among the fashion items. As a result of the task experience, participants became aware their stagnant fashion style and reflected on shopping habits and low clothing usage-efficiency. This study is meaningful in that it systematically explored creative clothing consumption behavior step by step from a consumer perspective.

• Archives of Plastic Surgery
• /
• v.36 no.6
• /
• pp.727-734
• /
• 2009

Purpose: The Inaba's procedure, the treatment of osmidrosis axillae, has the advantages of low recurrent rate and easy to learn, yet it produces early postoperative discomfort and scar formation by tie - over dressing. The authors modified the Inaba's procedure by using delayed suture of the incision wound and omitting tie - over dressing. The comparative study of Inaba's procedure and its modification was performed to confirm the advantages of modified procedure. Methods: The study contains the retrospective analysis of the medical records of 296 patients with osmidrosis who were treated using the Inaba's procedure from December, 1996 to February, 2007. The study also contains the prospective analysis of 20 patients, from March, 2007 to July, 2008, who were treated by the modified Inaba's procedure with delayed suture of the incision wound and gentle pressure dressing instead of tie - over dressing. The operative results of two groups were compared and verified by Mann - Whitney U test(SPSS 12.0). Results: The incidence of complications was 14.5% in the Inaba's procedure, whereas 6.2% in the modified Inaba's procedure. Both procedures have the same basic surgical procedure in terms of the location of incision site and subdermal shaving of the sweat glands, and therefore similar good results were obtained in the aspect of postoperative axillary odor, recurrent rate and postoperative condition of axillary hair. Certainly, the modified Inaba's procedure had better outcome in each element of PSS(Patient Scar Self-Rating Scale), compared to the Inaba's procedure. In addition, the modified Inaba's procedure showed a statistical significance in dressing - related pain reduction and overall satisfaction. Conclusion: The modified Inaba's procedure had advantages of decreased early postoperative complications such as hematoma, discomfort and pain caused by tie - over dressing, and decreased scar formation. However, the drawback was delayed suture of the incision wound after 48 hours.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.25 no.2
• /
• pp.23-30
• /
• 1980

Experiments were conducted to know N, P, and K top dressing effects on yield and other agronomic characters of rice plants grown in 5-year differently fertilized soils. Four levels of nitrogen, 0, 1.2, 2.4, and 3.6kg/10a, were applied 32 days before heading in 5-year non-fertilized and PK applied plots. Four levels of P_2 $O_{5}$ and K_2 O of 0, 4, 8 and 12kg/l0a were applied 40 days before heading in 5-year NK and NP applied plots, respectively. 1. Heading was delayed by seven days in 5-year non-fertilized and PK applied plots compared to NK, NP, or NPK applied plots where nitrogen was applied as basal. However, in 5-year non-fertilized and PK applied plots heading was delayed from 1 to 4 days as amounts of nitrogen top dressing increased. Phosphorus and potassium did not affect heading date of rice plants. 2. In 5-year non-fertilized plot grain yield increased as amounts of nitrogen top dressing increased up to 2.4kg/l0a due to both increased number of panicles per hill and spikelets per panicle. However, in 5-year PK applied plot amounts of nitrogen top dressing did not affect grain yield; the number of panicle per hill increased, but the percentage of ripened grains and grain weight tended to decrease as nitrogen levels increase. 3. The number of panicle/maximum tillers ratio in percentage increased markedly as amounts of nitrogen top dressing increased in 5-year non-fertilized and PK applied plots with maximum value of 130% on the basis of maximum tillers at vegetative stage. 4. Top dressing of phosphorus and potassium did not affect yield and other agronomic characters in NK and NP applied plots.