• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.675-686
• /
• 2021

This study investigated the ground displacement occurring in a slope below a waste-rock dumping site and estimated the likelihood of a disaster due to a landslide. To start with, photogrammetry was conducted by unmanned aerial vehicles (UAVs) to investigate the size and extent of the ground displacement. From April 2019 to July 2020, the average error rate of the five UAV surveys was 0.011-0.034 m, and an elevation change of 2.97 m occurred due to the movement of the soil layer. Only some areas of the slope showedelevation change, and this was believed to be due to thegroundwater generated during rainfall rather than the effect of the waste-rock load at the top. Sensitivity analysis for LS-RAPID simulation was performed, and the simulation results were compared and analyzed by applying a digital elevation model (DEM) and a digital surface model (DSM)as terrain data with 10 m, 5 m, and 4 m grids. When data with high spatial resolution were used, the extent of the sedimentation of landslide material tended to be excessively expanded in the DEM. In contrast, in the result of applying a DSM, which reflects the topography in detail, the diffusion range was not significantly affected even when the spatial resolution was changed, and the sedimentation behavior according to the river shape could be accurately expressed. As a result, it was concluded that applying a DSM rather than a DEM does not significantly expand the sedimentation range, and results that reflect the site situation well can be obtained.

• Journal of Animal Environmental Science
• /
• v.14 no.1
• /
• pp.61-68
• /
• 2008

The roof structural model of liquid manure storage tank was designed to improve a structural safety and an ability of resistance to corrosion by the bad environmental condition with high humidity and high gas concentration. Due to corrosion of a general steel, the 5 years used materials were reduced to one-third of a new material in the result of a bending strength test. Some structural materials were tested to evaluate a strength and an anti-corrosion, and stainless steel pipe (STS439), steel angle with zinc hot dipping, rectangular steel pipe covered with FRP (Fiberglass Reinforced Plastics) resin were selected finally. A stainless steel is more expansive about $3{\sim}5$ times than general structural steel. But its durability under heavy corrosive environment is expected twice as long as general steel. The roof models were designed as closed cone type for each of the three structural materials. In the result of a FEM (Finite Element Method) structural analysis for the developed models, the safe snow depth was higher 2.3 times than a general roof structure, when elements of equal section modulus were used.

• Korean Journal of Health Education and Promotion
• /
• v.21 no.4
• /
• pp.35-49
• /
• 2004

The purpose of this study was to analyze variables associated with smoking and selected health behaviors. This study targeted adult men and women over 20 of age. The sample population was drawn from the national sample, and the samples were chosen from the telephone book. A total of 1,500 cases were collected through a telephone based interview survey. As a tool for this study, a structured questionnaire was developed. the variables included self-perceived health status, and selected 7 health behaviors; smoking behavior, physical activities, eating habit, weight control, alcohol consumption, stress management, and cancer exam. The healthy life practice actions of Trans-theoretical model have been classified into five stages. Smokers were more likely than non-smokers to positive attitudes toward smoking and the impact of smoking in this study. This means that smokers's awareness toward the impact of smoking is very week. Smoking behavior was significantly related to other health related behaviors based on the correlation analysis. However, gender, engaging in regular physical activities, moderate consumption of alcoholic beverages, and receiving a cancer examination were the variables that can explain and predict a person's stages of adopting a non-smoking behavior. Self perceived health status was closely related to other health behaviors. Gender, age, and monthly household income were important demographic variables that have significant relationship with the self-perceived health status. Among the health behaviors, regular physical activities and weight control were significant predictable variables. Similar results have been found in the National health and Nutrition examination survey in Korea. As a result of this study, it was found that among the selected health behaviors, engaging in physical activity was an important variable to increase positive sense of health and non-smoking behaviors. Educational and policy level input is needed to increase awareness and provide chances to participate in fitness activities. To those who maintain exercise, the environmental support and diffusion of knowledge information and education data should be strengthened. To change attitudes toward smoking, more in-dept awareness campaign and education should be provided according to people's different behavioral status. In addition, not only diffusing health education data and delivering knowledge information through related programs, but also environmental support system that helps an individual maintain his/her action is required. Such a support system means settlement of the health enhancement base of school, workplace and community should be carried out, and the policy level support and regular programs should be provided and spread to the unit of community.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1231-1236
• /
• 2014

Recently, diffusion and proliferation of mobile devices increases, per person n opens for the mobile device era. Mobile devices and OS types of continuously growing trend. More than 80% of market share with Google's Android and Apple's iOS as well as Samsung and Intel is developing TIZEN, Linux and Mobile was the UBUNTU which UBUNTU for Phone, UBUNTU touch, Mozilla 's Firefox OS, Microsoft 's windows mobile and many more OS are ahead of the launch. But different OS can share files between systems or technology is not. Bluetooth or WIFI Direct such technologies are present but can be transferred between compatible devices low, resulting in constraints file types also exist. In this paper, is equipped with a WiFi card in an environment where the Android mobile OS party this model and method for sharing files between different research and can share the file system based on research on.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.247-259
• /
• 2012

The purpose of study is to advance current smartphone research past the limitation it faces being focused primarily on functional performance and to understand the causes of Smartphone diffusion. In order to do this, the dominant design concept was applied in examining the relationship between the determinants of the dominant design and the acceptance of smartphones. The research has yielded results which show that determinants such as technological superiority, number of installed based products, and availability of complementary goods have a positive effect on the intention to use smartphones and the attitude toward its use. Moreover, this study has contributed in broadening the understanding of dominant design by introducing the central concepts of dominant design which are not being dealt with in domestic studies and presenting the major variables which must be considered in the acceptance of smartphones.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.11
• /
• pp.689-695
• /
• 2016

The performance of proton exchange membrane fuel cells (PEMFC) is strongly related to the water flow and accumulation in the gas diffusion layer (GDL) and catalyst layer. Understanding the behavior of fluid from the characteristics of the media is crucial for the improvement of the performance and design of the GDL. In this paper, a numerical method is proposed to calculate the design parameters of the GDL, i.e., permeability, tortuosity, and effective diffusivity. The fluid flow in a channel filled with randomly packed hard spheres is simulated to validate the method. The flow simulation was performed by lattice Boltzmann method with bounce back condition for the solid volume fraction in the porous media, with different values of porosities. Permeability, which affects the flow, was calculated from the average pressure drop and the velocity in the porous media. Tortuosity, calculated by the ratio the average path length of the randomly injected massless particles to the thickness of the porous media, and the resultant effective diffusivity were in good agreement with the theoretical model. The suggested method can be used to calculate the parameters of real GDL accurately without any modification.

• International Journal of Highway Engineering
• /
• v.7 no.1 s.23
• /
• pp.31-38
• /
• 2005

Concrete has higher vapor pressure than its surrounding ambient air immediately after placement. Moisture at concrete surface evaporates to the ambient air to adjust equilibrium of the vapor pressure between them. The moisture inside the concrete moves to the surface because the evaporation at the surface causes gradient of vapor pressure inside the concrete. Plastic cracking, degree of hydration, strength development, and others caused by velocity of the moisture movement significantly influences quality of concrete. In this paper, the moisture diffusivity of early-age concrete was back-calculated using governing equation of the moisture diffusion, and temperature and relative humidity of concrete measured in a laboratory. The moisture diffusivity of the concrete was modeled using the back-calculated moisture diffusivity. The relative humidity of the concrete calculated by finite element method (FEM) using the modeled moisture diffusivity as Input data coincided with the measured relative humidity well.

• Environmental and Resource Economics Review
• /
• v.18 no.1
• /
• pp.75-103
• /
• 2009

The hypothesis suggested by Porter and van der Linde claims that innovating firms operate in a dynamic competitive situation which allows global diffusion of environmental-friendly technologies. Therefore, countries that are subjects to more stringent environmental regulations may become net exporters of environmental technologies. In the context of Porter hypothesis, this study investigates the impact of importing countries' environmental regulation on Korea and Japan's export flows of technologies for renewable energies and energy efficiency by estimating the gravity equation. The estimation result shows that : (1) our results are consistent with the Porter hypothesis where environmental regulation represents a significant source of comparative advantages, (2) Korea's export flows of technologies for renewable energies and energy efficiency with respect to the importing countries' environmental regulation are more sensitive than Japan's, and (3) the adverse relationship between export flows and importers' environmental stringency in developing countries does not hold in the renewable energies and energy efficiency related sector.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.2
• /
• pp.109-114
• /
• 2006

Biodegradable poly(D,L-lactide-co-glycolide) (PLGA) nanoparticles were developed for sustained delivery of water-soluble macromolecules. PLGA nanoparticles were fabricated by spontaneous emulsification solvent diffusion method generating negatively charged particles and heterogeneous size distribution. As a model drug, blue dextran was encapsulated in PLGA nanoparticles. In addition, nanoparticles were also prepared with varying ratio of poloxamer 188 (P188) and poloxamer 407 (P407), and coating with poly(vinyl alcohol) (PVA). Then, the particle size, zeta potential and encapsulation efficiency of nanoparticles containing blue dextran were studied. In vitro release of blue dextran from nanoparticles was also investigated. The surface and morphology of nanoparticles were characterized by scanning electron microscopy (SEM). In case of nanoparticles prepared with PLGA, P407, and different organic solvents, particle size was in the range of $230{\sim}320\;nm$ and zeta potentials of nanoparticles were negative. The SEM images showed that ethyl acetate is suitable for the formulation of PLGA nanoparticles with good appearance. Moreover, ethyl acetate showed higher encapsulation efficiency than other solvents. The addition of P188 to formulation did not affect the particle size of PLGA nanoparticles but altered the release patterns of blue dextran from nanoparticles. However, PVA, as a coating material, altered the particle size with increasing the PVA concentration. The nanoparticles were physically stable in the change of particle size during long-term storage. From the results, the PLGA nanoparticles prepared with various contents of poloxamers and PVA, could modulate the particles size of nanoparticles, in vitro release pattern, and encapsulation of water-soluble macromolecules.

• Archives of Pharmacal Research
• /
• v.27 no.11
• /
• pp.1177-1182
• /
• 2004

The effect of poly[2-methacryloyloxyethyl phosphorylcholine] (pMPC) on the skin permeation property was investigated by performing in vitro skin permeation study of a model drug, nicotinic acid (NA). Effect of pMPC polymer in donor solution on skin permeation rates was evaluated using side-by-side diffusion cells. Also, the structural alterations in the stratum corneum (SC), inter-lamellar bilayer (ILB) and dermis layers in pMPC-treated and -untreated skin sections were investigated with transmission electron microscopy (TEM). The permeation profile of NA without pMPC in donor solution showed biphasic mode: initial $1^{st} phase and 2^{nd}$ hydration phase. The sudden, more than 10-fold increase in flux from the initial steady state (43.5 $\mu g/cm^2$/hr) to the $2^{nd}$ hydration phase (457.3 $\mu g/cm^2$/hr) suggests the disruption of skin barrier function due to extensive hydration. The permeation profile of NA with 3% pMPC in the donor solution showed monophasic pattern: the steady state flux (10.9 $\mu g/cm^2$/hr) without abrupt increase of the flux. The degree of NA permeation rate decreased in a concentration-dependent manner of pMPC. TEM of skin equilibrated with water or 2% pMPC for 12 h showed that corneocytes are still cohesive and epidermis is tightly bound to dermis in 2% pMPC-treated skin, while wider separation between corneocytes and focal dilations in inter-cellular spaces were observed in water-treated skin. This result suggests that pMPC could protect the barrier property of the stratum corneum by preventing the disruption of ILB structure caused by extensive skin hydration during skin permeation study.